-
Supporting Vendors
-
-
Latest Topics
-
-
Similar Content
-
By Lone Shark
Daniel Defense - DDM4-V7 - Rattlecan Cerakote Finish, .556 Semi-Auto Rifle, M-LOK, 16" Barrel.
Included with Rifle:
3 - Daniel Defense 10 rd. Mags.
Daniel Defense Muzzle Climb Mitigator, Gen II.
Magpul front and rear flip sights
BipodDeflector Brake Kit
Tipton Max Force carbon fiber cleaning rod.
Daniel Defense full-latch impact plastic case
380 rounds ammo.
Monmouth County Area - $2,960.
All Brand New - Never Fired - New Jersey Compliant
The first to post "I'll take it" wins the sale.
-
By StanMan01
Looking to sell an AR-15 with the following specs:
Upper:
Barrel: PSA 18" .223 Wylde SS Barrel (1/7 Twist)
Comp: VG6 Comp Pin and Welded by Tier 1
Rail: PSA Lightweight 15" MLOK Rail
BCG: PSA 5.56 Nitride MPI Full-Auto Bolt Carrier Group purchased on October 9th 2020
Optics: Scope is not included. I can include an EoTech 512 with GG&G Lens Cover (Logo is plain GG&G Logo) with box for $355 if the buyer is interested (Eotech Sold)
Lower:
Receiver: PSA AR-15 Lower Safe/Fire purchased on October 20th 2020.
LPK: PSA Lower Parts Kit
Stock: RRA A2 Buttstock Kit, Black
Trigger: Geissele SSA-E Trigger ($240 Trigger) - Has 0 rounds on it, Purchased on October 23rd. Can include original MilSpec take-off trigger
Pistol Grip - Have a replacement Hogue OverMolded Pistol Grip that will be included
Magazines:
2 - 10rd PMags Included
Ammo:Depending on Buyer need I can sell .223 or 5.56 (XM193 or XM855) at cost
Misc. Accessories: CMMG .22lr Conversion Kit unused with 10rd mag - $120 (Only looking to sell with the AR at the moment)
Rounds Count:
Upper has about 250 rounds down the pipe
Lower: Maybe 50 Rounds
Price: $SOLD
Location: Essex or Monmouth County FFL
Buyer must have FID and matching Driver License. Transfer will abide by all state/federal laws
First "I'll take it" gets it
Can provide additional photos upon request.
-
By Swizz70
Hello Gents,
I'm selling my (like new) AR mid length complete upper receiver chambered in 300BLKOUT 7.62 × 35mm manufactured by Special Ops Tactical. Only put approximately 100 rounds through it. For those of you who don't know, this basically will fit on most AR lowers and uses the same AR magazines but gives you a .30 caliber (7.62 x 35) by just swapping the upper receiver if you are looking for a heavier load and more knock down power for hunting etc. (obviously state laws apply). I'm only selling it because I ended up buying a complete .30 caliber rifle.
Here are some specs:
300 BLK Out Nitride - 14.5″ Pinned to 16" Overall Midlength Upper
GPX 12.6" MLOK Free Floating Rail System with continuous 1913 Picatinny rail on top
Muzzle Brake Original "Black Magic" 30 Cal (pinned & welded NJ legal).
{Nitride} M4 Extended Feed Ramps
Nitride M4 Barrel Extension
1:7 Twist Rate
5/8×24 Thread Pitch
Raptor Charging Handle
Price: $695
Pm or email me with any questions: [email protected]
I am in Deptford NJ.
THE FIRST TO POST "I'LL TAKE IT" WINS THE SALE.
A "PM sent" DOES NOT ESTABLISH THE SALE. If you want the item, post "I'll take it" and should the deal fall apart the seller can post "still available." Should you reach a negotiated price via PM then post "I'll take it per our PM(s)" on this thread.
-
By Zigzag22
Hello, I am looking for somewhere to get my muzzle brake pinned on a budget. I am okay with shops in Southern NJ and PA.
If anyone has any advice it would be greatly appreciated!
Thank you!
-
By Blank
These will be in NJ Stores soon.
Description
100% MADE IN AMERICA. All MODMAT rifles are made from domestic parts and assembled in New Jersey. Fully NJ and Federally compliant when purchased as a FIREARM. Total OAL 26.1″ w/ SB Tactical SBA3 Brace in closed position CERAKOTE FINISH: Blackened Cobalt, Slate Grey Burgundy Bronze, Patriot Brown or Sniper Green. MM Exit 5.56 V2 Muzzle Brake virtually eliminates muzzle climb while shooting. Designed and manufactured in New Jersey. Has NATO grooves for installation of blast shield or silencer. Ballistic Advantage 5.56 Government Profile, 11.5″ Carbine length AR15, Modern Series Barrel. Machined from 4150 Chrome Moly Vanadium steel with a QPQ corrosion resistant finish and M4 feed ramp extension. Ballistic Advantage .750″ pinned Lo-Pro Gas Block with QPQ corrosion resistant finish. Modern Materiel 10″ ultralight free float hand guard – Full Picatinny top rail and M-LOK mounting in 3, 6 & 9 o’clock positions. Domestic 8620 M16 Bolt Carrier Group and 9310 bolt with QPQ corrosion resistant finish. Flattop Upper Receiver – 7075 T6 forged aluminum with ejection port cover and brass deflector. MM Lower Receiver – 7075 T6 forged aluminum with magwell texture and integrated trigger guard. Magpul MOE pistol grip with extended trigger reach for more precise trigger control. Magpul MOE MVG M-LOK vertical fore grip. SB Tactical™ Pistol Stabilizing Brace (SB3) – provides all of the advantages of a handgun, but with a third point of contact — adding greater stability, accuracy and control. Also includes: One 10/30-round Mission First Tactical (MFT) magazine.
-
-
Posts
-
Near it. Now don't argue a few inches of penetration here. That can vary to the testing conditions using ballistics gel. But ballistics gel, properly used, gives a consistent standard for evaluation. 45 hardball runs about 30" of penetration. 9mm parabellum fmj runs 24-26". Not much difference. I have seen 45 fmj hit heavy bone like a hip and not exit. But the shot stopped the guy. Made the bad guy fall down. He dropped his gun in the process and offer no further resistance. Remember, as good guys we dont shoot to kill we shoot to stop. If you get the first shot off, miss the bad guy, and he drops his gun and surrenders that is a successful shoot. From the tests I've seen most of the 9mm copper rounds run about the same or a bit more than std fmj. They get their penetration from their high velocity. AFAIC I'd just as soon use fmj than pay the premium price copper rounds cost. Remember, once you get an entry and exit wound on the bad guy anything else is wasted and dangerous. There was a shooting by NYPD in the past few years. IIRC the bad guy was kind of big and was coming after two NYPD officers with a knife. Both shot him and they found bullets in the bad guys jacket. Initially it was reported the jacket stopped the Gold Dot the NYPD officers were using. When the boys (and girls) from forensics got done with their stuff the bullets had penetrated the bad guy and lodged in the jacket. Perfect performance of a SD bullet. There was another shooting outside the Empire State Building. The bad guy wasn't that big. NYPD shot him and there were claims bystanders were hit by the NYPD bullets. The crew from forensics proved the bystanders were hit by fragments of the NYPD bullets that had penetrated the bad guy. So much for all the people who claim cops can't shoot. I bring these incidents up because I always wait "for the rest of the story" before making a judgement. I'm not a fan of +P except in 38 special. I carry factory wadcutters in a j frame. Ive stated my reasons why several times. However, if you havent seen them pm me and I'll tell you. NATO spec pressure falls between SAAMI spec and +P. +P in 9mm really doesn't get you much more in performance over standard 9mm rounds. I've drifted from your question but felt my answer is applicable. The hollowpoint law in NJ only puts bystanders at risk.
-
-