PTR-91

[jermz1987 243]

Yes I want one of these very badly. They are awesome rifles.

[Big Jay 0]

My brother has one. Fret not about the polymer lower/trigger group. It's a metal frame shrouded in polymer. They're excellent quality guns. The front handguard/barrel shroud is an absolutely massive piece of metal. Gun shoots very well. Recoil is pretty much minimal. Only issue is in typical HK fashion, it mangles spent brass. Can't reload.

[Rob0115 1,106]

Met a fellow today at CR with a PTR-91 and he raved about it. I quite liked and for price (which I hear has gone up like everything else) it seems to be quite a good deal. His only complaint was it's bit of **** to clean.

[lunker 274]

I never found mine hard to clean. I loved that it ate steel cased ammo with no problems. On the other hand, the rifle's fluted chamber dents the casemouth and leaves a weird pattern in the brass that made me question its reloadability.

[Rob0115 1,106]

My FNAR dents the case mouth and I haven't had issues reloading them. It may shorten the life a bit.

[Big Jay 0]

I never found mine hard to clean. I loved that it ate steel cased ammo with no problems. On the other hand, the rifle's fluted chamber dents the casemouth and leaves a weird pattern in the brass that made me question its reloadability.

 

See my post. No chance of reloadability. According to my brother at least...who reloads extensively. The internals are HK btw. The bolt and carrier have "HK" on them.

 

EDIT: Just saw Rob's post. Guess they can be reloaded. Just a matter of how long the brass lasts and do you want to take the risk.

[jermz1987 243]

Got one. hehehe. I wouldl ike to get the HK G3 forend for it. It is a little front heavy, But not too bad.

 

[BMWR12 35]

Mine hand the same handguard and I did not like it, I swapped it with a earlier PTR slimline handguard. The original HK slimline will not fit without some modifications. I am nut sure if the wide handguard that can take a bipod does.

[jermz1987 243]

Yeah I've been reading the HK pro website and was considering getting this hand guard for mine. Says it will fit. I want to give it that classic G3 look. Says it will fit but I am a little nervous to order it.

 

 

http://www.hkparts.net/shop/pc/HK-93-33-G3K-Wide-Forend-Black-8p470.htm

[lunker 274]

Yeah I've been reading the HK pro website and was considering getting this hand guard for mine. Says it will fit. I want to give it that classic G3 look. Says it will fit but I am a little nervous to order it.

 

 

http://www.hkparts.n...Black-8p470.htm

 

No love for the machine aluminum?

The one in the link looks interesting. The other ones I have seen feel like thick, stiff rubber. I wasn't impressed.

[scatterbrains 0]

See my post. No chance of reloadability. According to my brother at least...who reloads extensively. The internals are HK btw. The bolt and carrier have "HK" on them.

 

EDIT: Just saw Rob's post. Guess they can be reloaded. Just a matter of how long the brass lasts and do you want to take the risk.

 

The cases as stated above are def reloadable, ive reloaded many fired from my PTR, the problem with the HK 308s is FINDING the brass after you shot it. Mine shot well, ironically i just traded it last week for a rcbs CM1500, a vortex rangefinder and $600 cash.

 

It shot well but i didnt give her the workout it deserved, i bought it in 03' and put less than 1k through it.

It ate everything, brown bear, silver bear, wolf, pof, indian, radway, federal, american eagle, remington I even ran some federal fusion through it LOL.

All the brass has been reloaded for my FR8, and shoots perfectly.

[BMWR12 35]

Yeah I've been reading the HK pro website and was considering getting this hand guard for mine. Says it will fit. I want to give it that classic G3 look. Says it will fit but I am a little nervous to order it.

 

 

http://www.hkparts.n...Black-8p470.htm

 

It is half the price here http://www.robertrtg.com/pofg3blackwide.html

[jermz1987 243]

It is half the price here http://www.robertrtg...3blackwide.html

 

 

Oh nice thanks for the link.

[BMWR12 35]

Oh nice thanks for the link.

 

Your welcome, The HK pro price is about what they go for with the bipod.The HK pro doesn't show it having the bipod. You can get hand guard and bipod for around $160 from RTG.

[Big Jay 0]

The cases as stated above are def reloadable, ive reloaded many fired from my PTR, the problem with the HK 308s is FINDING the brass after you shot it. Mine shot well, ironically i just traded it last week for a rcbs CM1500, a vortex rangefinder and $600 cash.

 

It shot well but i didnt give her the workout it deserved, i bought it in 03' and put less than 1k through it.

It ate everything, brown bear, silver bear, wolf, pof, indian, radway, federal, american eagle, remington I even ran some federal fusion through it LOL.

All the brass has been reloaded for my FR8, and shoots perfectly.

 

Now with everything going on it's one I wish i owned. I'd love to have rounded out the collection with one. However, you're right. I honestly don't enjoy shooting my brother's. It has very strange ergo's. I always feel like I'm cheeked way up on the rifle.

[Rob0115 1,106]

See my post. No chance of reloadability. According to my brother at least...who reloads extensively. The internals are HK btw. The bolt and carrier have "HK" on them.

 

EDIT: Just saw Rob's post. Guess they can be reloaded. Just a matter of how long the brass lasts and do you want to take the risk.

 

My comments are limited to my FNAR which I have experience. My SCAR17s puts a good scratch in the case neck and I haven't had problems there either.

 

However, I don't have any experience with cases coming out of this PTR-91 nor have I seen any. Your brother may well be correct regarding the reloadability of brass in a PTR91.

[tankcommander 4]

I've had a NJ compliant model for several years, the serial number is around 1000. I added surplus wood for an older look.

 

 

I have only good things to say about the rifle, although the trigger is a bit stiff. Also using blocked mags stinks.

 

TC

[Scrap 4]

where can I find one , NJ legal model, on the cheap or best price> Thanks

 

Also if anyone sees the 7.62x39mm model I would be interested.

[lunker 274]

where can I find one , NJ legal model, on the cheap or best price> Thanks

 

Also if anyone sees the 7.62x39mm model I would be interested.

 

This is a 10 pound rifle for an intermediate caliber like 7.62x39. Considering people shoot 5lb AKs without complaining about recoil, it seems like overkill. The PTR91 in 308 is a hell of a gun.

[Kaiser7 33]

I've had a NJ compliant model for several years, the serial number is around 1000. I added surplus wood for an older look.

 

 

I have only good things to say about the rifle, although the trigger is a bit stiff. Also using blocked mags stinks.

 

TC

 

This. I can't even describe it's beauty. I wanted a PTR-91 for a while, but couldn't afford the ammo... or the gun.

 

I actually have that wood stock sitting around. I bought it for an airsoft project I never got around to. But I'd slap that wood on in a heartbeat if I had a PTR.

[jermz1987 243]

[Secret Squirrel 3]

Still looking around for one, CT prices seem to have forced the prices up a little bit but nothing like an AR, once my tax return comes in I may get one.

[hd2000fxdl 422]

Very nice.

 

 

Sent from my iPad using Tapatalk

[coley 1]

I'm thinking about selling mine. It's about 2 years old, 500 rounds through it at the most. I also had a trigger job done and it improved it greatly. I need to see what they are going for before I make a decision. I also have probably 500 rounds of American eagle ammo to go with it.

 

[Blake 50]

I'm thinking about selling mine. It's about 2 years old, 500 rounds through it at the most. I also had a trigger job done and it improved it greatly. I need to see what they are going for before I make a decision. I also have probably 500 rounds of American eagle ammo to go with it.

 

Interested. If you decide to sell please shoot me pm with asking price.

[coley 1]

Sure. I will. I really don't want to, but I need the cash.

[coley 1]

Listed in classified section.

[smoe_picka 0]

The stock is terrible.