Jump to content
TonyS.

Starline .45acp brass?

Recommended Posts

Starline brass is made to SAAMI standards, which means it doesn't exceed the maximum specified length. All .45 ACP brass and new ammo that I have seen, comes in under max length. 

 

If your gun functions with the cartridge OAL at which your dies are set, then a case that is nominally shorter won't make a difference - just means a little more of the bullet will be exposed. No need to reset your dies.

 

Starline brass is good quality brass and used by many commercial/boutique ammunition manufacturers.

 

Adios,

 

Pizza Bob

Share this post


Link to post
Share on other sites

Thanks Bob. I'll give them a shot.  I was thinking about seating depth and pressure....  I guess I'll give them a shot. Thanks.

 

If you don't change your die setting, the internal volume will remain the same. You would only change the volume by seating the bullet deeper in the mistaken belief that you need to compensate, somehow, for the shorter brass. Just leave things alone, load and be happy.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.



  • olight.jpg

    Use Promo Code "NJGF10" for 10% Off Regular Items

  • Supporting Vendors

  • Latest Topics

  • Posts

    • I use an Alien Gear cloak tuck (IWB) with my Shield.  Neoprene back - in the summer it does feel warm but doesn't rub or chafe.   https://aliengearholsters.com/ruger-lcp-iwb-holster.html Could also go with the shapeshift as it has multiple options - OWB/IWB, Appendix... https://aliengearholsters.com/ruger-lcp-shapeshift-modular-holster-system.html
    • The  12-1 compression ratio L88 is long gone. This is GM's updated version. it might be  pump gas 10-1 engine The L88 was a aluminum head  cast iron block engine with a nasty solid lifter cam. the  ZL1 was a all aluminum  12 or 13-1 compression ratio engine with the best forged internal parts at the time and had a even nastier solid lifter cam 
    • I like my regular carry holster.  OWB leather with belt slots.  I've been carrying for over a year and it was comfortable and I hardly even noticed it.  I carry (usually) a Ruger LCP .380 - light, convenient, tiny. But...today I ended up taking it off an leaving it home after a few hours. I cut down a big maple tree a few days ago and I spent 3/4 of today loading and unloading firewood into the back of my truck and a trailer.  It was a warm day, I was dirty, tired, sweaty, and my holster was rubbing against my side.  The leather and exposed metal snap was no longer comfortable. I'm thinking about adding a layer of something to that part of the holster to soften the contact.  Anything insulating will make it worse.  I don't want a sweaty, hotter holster against my skin.  I'm imagining something thin, breathable, that won't absorb sweat, and softer than leather, metal snaps, and rivets.   But I have no idea what would work. I'm hoping somebody else has already figured this out and I can just do what they did. Any suggestions appreciated.
    • Check the primers on the ammo you didn't shoot yet. Are they fully seated? If the primer is not just below flush with the back of the case, the first hit can seat it better then the second hit ignites it. 
    • And, charging your car at home? We've got you covered! California braces for new electric plan: Make more, pay more | Fox Business
×
×
  • Create New...