-
Supporting Vendors
-
-
Latest Topics
-
-
Similar Content
-
By medic2264
WTS M1 GARAND CORRECTED MAY 1943
RECEIVER SA 1.5 million, no pitting
BOLT 12SA "B3" heat lot
STOCK SA/EMcF with crossed cannons and serif "P"
BARREL SA 05-1943 TE 2.5 ME 3
GAS CYLINDER narrow base w/ worn finish
FRONT SIGHT SA
GAS SCREW single slot
GAS LOCK beveled edge
REAR SIGHT SA lockbar (round)
TRIGGER HOUSING 12
HAMMER SA 5
SAFETY SA 9
PLUNGER with wings
TRIGGER GUARD milled
FOLLOWER SA 11
FOLLOWER ROD SA short fork
OP ROD SA 6 no relief cut
SLING Leather Reproduction 1944
$2500 $2250 $2000 final price drop
BUYER IS RESPONSIBLE FOR ALL TRANSFER FEES
I am in Monmouth County
The first "I'LL TAKE IT" followed by a PM gets it
If you have an questions send me a PM
-
By 8lbsledge
Looking to sell 1940 dated, Sniper marked Tula Mosin-Nagant with 40rd of Yugoslav Surplus LPS ammo with 2 clips. Rifle began it's life from the factory as a PEM pattern sniper rifle, sporting a copy of a German ZF-39 scope on a side mount. After the war, it was decommissioned and placed in a laminate stock, with the optic removed. Despite the stock replacement, the buttplate was retained from the original stock, and is numbered 217 like the rest of the parts. Rifle functions, and shoots fairly well, and the bore is in good shape. Photos provide proof of previous optic mount.
Included: Rifle, 40rd surplus ammo, 2 clips
Price for all pictured: $550 cash
Located in Warren county, will not drive further than 45min from washington
-
By jt52
Looking to get my hands on a BAR to further my addiction of WW2 era firearms. I would be cool with a non firing replica possibly. If you have anything or know of anyone selling let me know!
-
By jt52
Looking for k98 rifles, stock, parts, etc.
*Main goal currently is tracking down a pre, wartime, or post war German scope for a sniper build....preferably low/high turret*
*Really looking for fixer upper rifles but wont turn down a nice complete rifle*
-
-
Posts
-
By Cheflife15 · Posted
I think this ammo was bought during the pandemic where it seems like quality control went out the window. I should have taken a picture of the primers today after shooting. Some had some pretty deep indents. I shoot da/sa. The thing that was a bit alarming was sometimes it didn't go off on the second attempt of dropping the hammer and sometimes it did. -
It’s possible it’s the ammo. Try a box of something from Federal-Federal primers are known to be the ‘softest’. If you get misfires still, the gun is again the prime suspect of course you’ll ultimately want it to run with any ammo, but I’ve known revolvers that can’t seem to get to 100% ignition double action with any other primer
-
By Cheflife15 · Posted
I've been getting light primer strikes lately with my CZ. It's happening mostly with some remington 9mm I bought. It has an extended firing pin and is certainly hitting the primer so I don't believe it's that. Maybe the spring needs replacement? I did the pencil test and the pencil flew about 7 feet. Is it just hard primers/crappy ammo? Gun has about 7/8k rounds through it. -
By GrumpyOldRetiree · Posted
Happened almost a year ago (5/23/23) on Easton Ave. Has anyone heard anything more about this? I can't find anything on on google.
-
-