-
Recently Browsing 0 members
No registered users viewing this page.
-
Supporting Vendors
-
-
Latest Topics
-
-
Similar Content
-
By medic2264
WTS USED GEN 5 GLOCK OVERWATCH PRECISION TAC TRIGGER
$125 Overwatch precision tac trigger gen5
$20 Hyve technologies extended magazine release gen 4/5
I'm in Monmouth County
The first "I'll take it" followed by a PM
PM me for questions.
-
By Taylor Ham
I have a Custom Radian 10.5 OTHER(Pistol) rifle with a 9MM Noveske match barrel. This is a OTHER with a 10.5 PINNED SLR Linear Hybrid Comp with a total of 26 " in overal length. Buyer has the ability to use this a OTHER (if legal in your state) Pistol or register it as a SBR per your states requirements. You also have the ability to remove the 9MM perm Mag Block and barrel and convert it back to 556 or 300 black out as the Radian build kit upper and lower are for AR 15 style. As far as this PCC this is the devil in disguise YOU WILL not find a better shooting 9MM PCC type rifle period. The applications for use of this rifle are enldess, the Noveske barrel are one of the best in the market. The barrel has barely had 500 rounds on it, and shoots MOA up to a 100 yards with out a doubt. Buyer pays for FFL shipping and buyer must comply with local state laws. This winner will get everything in the pictures including 4 Colt Steel 9MM 10/30 Mags long and 4 shorty Colt 9mm 10 round mag total of 8 mags.
I am in Northern NJ and will meet at local FFL in Pinebrook, or of your choice.
I am asking for $2000 cash (no trades price is firm) or electronic transfer via Apple pay or your payment method. ,This new price will not include the OPTIC AND KAC RISER, everything else you see you get. This is well north of 3k plus when you add up what you have, making room in my safe.
The Build and whats included.
RADIAN BUILDERS KIT
1x Billet Upper Receiver w/Dust Cover, Anti-Rotation Pin & Light Weight Forward Assist Installed
1x Hand Guard w/Magpul M-LOK® Modular Attachment Interface
1x Radian AX556 Lower Receiver
1x Raptor-SD Ambidextrous Charging Handle
1x Radian Talon 45/90 Ambidextrous Safety Selector
1x Ambidextrous Bolt Catch & Release
1x Ambidextrous Magazine Release
1x Enhanced Takedown Pin Set
1x Aluminum Barrel Nut
1x Barrel Nut Wrench
4x Hand Guard Cross Bolts, Washers & Nuts
NOVESKE BARREL
10.5” 416R Stainless 9x19mm with 1:12 right hand twist
• Barrel extension w/extended feed ramps
• ½” x28 muzzle threads
• Weight is 18.5 oz
ATC AR GOLD TRIGGER
3.5 lbs. (Fixed Weight) Drop Safe Drop-In Module (easy installation) Uses .154 pins Shortest Reset Designed for AR-15 & AR-10 Platform (.223, 5.56, .308, 7.62, .300 BLK, 6.5 Grendal, 6.5 Creedmoor and 9MM/PCC’s) 30 Day Money Back Guarantee Made in USA Used by Top Competitive shooters including Jerry Miculeck and Daniel Horner SLR Linear Hybrid Comp 9mm
Synergy Linear Hybrid Compensator 9mm
Melonite Finish 416 Stainless Steel Core with G5 Titanium Sleeve
Adds 1.52" inches to barrel
1/2x28 Threading
1.25" OD
2" OAL
4.4 oz
Holosun AEMS Core red dot
EMS-Core-Green features Holosun’s Green Super LED and includes 8 daylight and 4 night vision compatible intensity settings, a precision 2MOA, and Shake Awake technology. A side mounted battery trays houses a 2032 battery which provides up to 50k hour battery life. AEMS-Core-Green strikes a balance between performance and features for users of any level.
KAC Sky Scraper
Aimpoint Micro NVG High Rise Mount By lifting the optic up higher you can clear lights, lasers and any other items that can obstruct your sight picture. With our new Aimpoint Micro NVG mount, we push the boundaries further than before. With a height of 2.33” from the top of your 1913 pic rail to the center point of your optic, you now have the ability to see your irons through the mount. We have also integrated a section of 1913 rail, so you can run Aimpoint or Eotech magnifiers.
HAHN PRECISION AR-15/M16 9MM DROP-IN CONVERSION BLOCK
Designed, manufactured, and field-tested specifically for law enforcement personnel who require an AR-15/M16 dedicated to 9mm ammo using Colt and modified Uzi-type magazines. Integral “leg” hooks over the top of the lower receiver to prevent accidental fall-out during actual combat situations where reliability is paramount.
-
By MartyZ
Please read this entire post, there is a lot of information, please read read all of it before making a decision. I am selling ALL of my reloading equipment, everything set up for 9mm, 45 ACP, 223, and 308.
I will not ship Large or Hazmat items, pick up local in the Manalapan area. I am willing to drive 10 miles in any direction. For large orders I would consider driving further.
I can ship small items on your dime. Keep in mind, bullets are small but very heavy, shipping them will be expensive
My pricing methodology is simple, all prices are based on retail prices as of 6/29/2022:
All hardware, whether New or Used, is 10% below amazon prices.
Bullets are full retail price per powder valley and Berry’s prices for un-opened boxes. 10% below retail for loose bullets
All prices are rounded to the nearest dollar
There is always room to negotiate price as long as the offers are reasonable. But all negotiations must be completed prior to delivery, not during the delivery (I had a bad experience with this).
First “I’ll take it” in the thread, not via PM, gets the sale.
If we are negotiating via PM and someone says “I’ll take it” in the thread during negotiations, the “I’ll take it” gets the sale.
Most items can be purchased separately but some will need to be combined for obvious reasons. Here is the extensive list. Photos will be provided upon request, there are too many to put into the post.
I accept Cash or Paypal as gift
Hornady LnL Shell Plates – Sold individually
#1 - $36
#16 - $36
#25 - $36
Hornady Custom Grade New Dimension 2-Die Set – Sold individually
.223 (2 LnL Bushings Installed - $12) - $60
.308 (with spare zip spindle, expander and 2 decapping pins - $12) - $60
Hornady Custom Grade New Dimension 3-Die Set – Sold individually
.45 ACP (3 LnL Bushings Installed - $18) - $68
Case Prep – Sold individually
Lyman 7832323 Reloading 223 Case Length/Headspace Gauge - $19
Lyman Reloading 308 Win Case Length/Headspace Gauge - $19
Lyman Reloading 40 S and W Pistol Max Cartridge Gauge - $15
Lyman Multi-Caliber Large Rifle Ammo Checker - $42
Priming – as a set - $54 Total
Lee auto primer - $31
Lee shell holders - $23
Bullet feeder
45 ACP – as a set - $87 Total
Hornady LnL Bullet feeder die (1 LnL Bushings Installed - $6) - $48
Hornady Lock-N-Load Bullet Tube set - $39
Misc - Sold individually
Hornady Powder cop - $40
Lyman, Brass Smith Powder Trickler (New) - $27
Frankford Arsenal Quick-N-EZ Impact Bullet Puller - $12
Lee universal decapping die with 2 spare pins - $20
Bullets – Sold by caliber (all available per caliber must be bought together)
Hornady Interlock 150 gr SP .308 (.308/7.62) – 500 Unopened (5 boxes) 21 loose – 521 in total - $149
Hornady Match 68 gr HPBT .224 (.223/5.56) – 53 loose - $11
Hornady 180 gr TMJ RNFP .401 (.40 S&W) – 547 loose - $103
Berry’s 230 gr Plated RN .451 (.45 ACP) – 403 loose - $77
-
By michael ruscingno
Great shape! Taurus g2c 9mm with stainless steel slide. All condition shown in photos, pretty good condition! https://imgur.com/a/9ldPfTH (Photo album)
asking $150 bucks plus buyer responsible for transfer.
comes with two 10 round mags.
willing to meet local to ridgewood NJ Bergen, Passaic county areas, at FFL. Also comfortable with shipping at buyers expense
-
-
Posts
-
By Oldmanyama · Posted
Is the mossberg shockwave for sale? -
Depends on your location. I don’t mind meeting half way within reason. The light alone goes for around $250 used. And the pressure pad and tail cap around $120-140 from what I’ve just seen. If I’m off someone chime in please. I’d throw in the mount for free for a package deal at $365. I also have Surefire M640DFT, M340C, and X300U and Streamlight TLR-7A Flex I’m considering parting with but I have to sell a few guns before I get rid of their jewelry. I have no problem shipping.
-
Price (and it would have to be mailed)?
-
Yea it dual fuel m600 and accepts 1x18650 or 2xCR123A. Both can be rechargeable but its brighter with non rechargeable CR123A’s
-
-