Jump to content
usnmars

Aim has new price on psl's

By usnmars, in Rifles

Recommended Posts

tinyboy    1

tinyboy
Posted
I spent almost $1800 dealer price on a MSAR STG-E4 a month ago. Now I can get them for several hundred less and am selling them for $1460 at a profit. :o At least until supplies run out. ;)

 

Am I mad. At first yes, but now no. Who am I going to be mad at, myself? That's the way things work. S*@t Happens.

 

Ok fine, but the point is, you WERE mad. Im in the "WERE" stage right now, I just found out last night, Im gonna be pissed for a little bit, at least until I call them

Share this post

Link to post
Share on other sites

tinyboy    1

tinyboy
Posted
I spent almost $1800 dealer price on a MSAR STG-E4 a month ago. Now I can get them for several hundred less and am selling them for $1460 at a profit. :o At least until supplies run out. ;)

 

Am I mad. At first yes, but now no. Who am I going to be mad at, myself? That's the way things work. S*@t Happens.

 

Are you really selling them for 1460?

Share this post

Link to post
Share on other sites

HODGIE    3

HODGIE
Posted
Ill be at the CJ get together next Sunday or will meet you anywhere, any time to discuss this in person

 

:roll:

I don't know you you do not know me It's best if we keep it that way trust me.

as stated above I am done with this thread, my opinion was stated and you did not like it.

Share this post

Link to post
Share on other sites

tinyboy    1

tinyboy
Posted
Ill be at the CJ get together next Sunday or will meet you anywhere, any time to discuss this in person

 

:roll:

I don't know you you do not know me It's best if we keep it that way trust me.

as stated above I am done with this thread, my opinion was stated and you did not like it.

 

why is it best that I dont know you? are you going to blow up my house or something? I would gladly meet you somewhere to sit down and have a meal (I dont drink or else it would be beers) and discuss this with you. I am all for arguing my point excessively until I see your side of the argument or you see mine, or we agree not to see the other side of things

 

All I said was I have a right to bitch, and I didnt appreciate being called a whiner which is why I said GFY.

 

tiny

Share this post

Link to post
Share on other sites

HODGIE    3

HODGIE
Posted

No I am not a terrorist and I do not make threats on the internet.

It does not seem like we are the same type of people so why make it worse, and whats really to

talk about regarding this subject? Maybe one day we will do some shooting together maybe not but

I have no personal ill will towards you.

Share this post

Link to post
Share on other sites

tinyboy    1

tinyboy
Posted
No I am not a terrorist and I do not make threats on the internet.

It does not seem like we are the same type of people so why make it worse, and whats really to

talk about regarding this subject? Maybe one day we will do some shooting together maybe not but

I have no personal ill will towards you.

 

OK I ahve nol ILl will towards you either, I'm just pissed at AIM, and I was looking for sympathy

Share this post

Link to post
Share on other sites

PK90    3,570

PK90
Posted
Are you really selling them for 1460?
Yes. Pre-compliance price.

(NICS, Tax and your choice of brake not included)

 

Nice to see a thread gone bad settled civilly.

 

Which brings out a point. Has a thread ever been locked on NJGF?

Share this post

Link to post
Share on other sites

tinyboy    1

tinyboy
Posted
Are you really selling them for 1460?
Yes. Pre-compliance price.

(NICS, Tax and your choice of brake not included)

 

Nice to see a thread gone bad settled civilly.

 

Which brings out a point. Has a thread ever been locked on NJGF?

 

does it need a brake? is it a threaded barrel? or can I just leave it

 

How much is a brake pinned on?

Share this post

Link to post
Share on other sites

coldsolderjoint    84

coldsolderjoint
Posted
Are you really selling them for 1460?
Yes. Pre-compliance price.

(NICS, Tax and your choice of brake not included)

 

Nice to see a thread gone bad settled civilly.

 

Which brings out a point. Has a thread ever been locked on NJGF?

 

the magicman thread I think

Share this post

Link to post
Share on other sites

tbtrout    141

tbtrout
Posted

I just hit this thread and it was almost locked. But as stated seems to be settled . Anymore name calling and the thread will be deleted.

 

Tiny, just call and ask. AIM does have a good rep and is not out to screw you, you just missed the sale.

Share this post

Link to post
Share on other sites

Joeybones    1

Joeybones
Posted

Reading their FFL requirements it almost sounds like only dealers can place the order.

How did you who have ordered one handle the transaction.

 

from their FAQ section

What is a "Dealer Transfer"?

A Dealer Transfer takes place when a 01 Federally Licensed Firearms dealer transfers a firearm to a Non-FFL Holder or consumer. If you are a consumer desiring to purchase a firearm from AIM, Inc., you must first locate a dealer in your area, who is willing to order/transfer the firearm to you.

Share this post

Link to post
Share on other sites

coldsolderjoint    84

coldsolderjoint
Posted
Reading their FFL requirements it almost sounds like only dealers can place the order.

How did you who have ordered one handle the transaction.

 

from their FAQ section

What is a "Dealer Transfer"?

A Dealer Transfer takes place when a 01 Federally Licensed Firearms dealer transfers a firearm to a Non-FFL Holder or consumer. If you are a consumer desiring to purchase a firearm from AIM, Inc., you must first locate a dealer in your area, who is willing to order/transfer the firearm to you.

 

Not True. It is easier if the dealer will just order it from you. But they will sell to an individual (with FFL transfer), just like any other online gun shop.

 

I ordered a Vz 24 Mauser from them the last time they had it, and a lady called me to say that my order was towards the end of their stock and when they opened up the crates on the bottom of the pile, it turned out those rifles were in piss poor condition. So they had to cancel. I told her that I didn't need the ammo I ordered then. So she walked into the wear house and pulled the box off of the pallet. At least they seem to stand behind their products.

Share this post

Link to post
Share on other sites

tony357    386

tony357
Posted
Reading their FFL requirements it almost sounds like only dealers can place the order.

How did you who have ordered one handle the transaction.

 

from their FAQ section

What is a "Dealer Transfer"?

A Dealer Transfer takes place when a 01 Federally Licensed Firearms dealer transfers a firearm to a Non-FFL Holder or consumer. If you are a consumer desiring to purchase a firearm from AIM, Inc., you must first locate a dealer in your area, who is willing to order/transfer the firearm to you.

 

 

I purchased the firearm from aim and they shipped it to my ffl where i paid the transfer fee and nics. no tax as the gun was sold to me out of state.

Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
Go To Topic Listing

  • Recently Browsing   0 members

    No registered users viewing this page.



  • NJGF/SlavGuns Gun Giveaway!

    Ruger65Grendel.jpg

     

  • olight.jpg

    Use Promo Code "NJGF10" for 10% Off Regular Items

  • Supporting Vendors

  • Latest Topics

  • Posts

    • leahcim
      The Tax Man Commeth

      By leahcim · Posted

      We never let then inside.  Last re-evaluation was 6-7 years ago, wife politely told him that he was welcome to look around the property and he could look in the windows. He saw two white resin chairs in the basement and told her that this constituted a finished basement. And everything in the basement is bare concrete/ cinder block, and mechanical systems. Nothing finished about it. Ultimately he relented and I'm sure that was a ploy to coerce us to allow him in
    • Krdshrk
      Softer Holster

      By Krdshrk · Posted

      I use an Alien Gear cloak tuck (IWB) with my Shield.  Neoprene back - in the summer it does feel warm but doesn't rub or chafe.   https://aliengearholsters.com/ruger-lcp-iwb-holster.html Could also go with the shapeshift as it has multiple options - OWB/IWB, Appendix... https://aliengearholsters.com/ruger-lcp-shapeshift-modular-holster-system.html
    • silverado427
      Daily humor thread

      By silverado427 · Posted

      The  12-1 compression ratio L88 is long gone. This is GM's updated version. it might be  pump gas 10-1 engine The L88 was a aluminum head  cast iron block engine with a nasty solid lifter cam. the  ZL1 was a all aluminum  12 or 13-1 compression ratio engine with the best forged internal parts at the time and had a even nastier solid lifter cam 
    • maintenanceguy
      Softer Holster

      By maintenanceguy · Posted

      I like my regular carry holster.  OWB leather with belt slots.  I've been carrying for over a year and it was comfortable and I hardly even noticed it.  I carry (usually) a Ruger LCP .380 - light, convenient, tiny. But...today I ended up taking it off an leaving it home after a few hours. I cut down a big maple tree a few days ago and I spent 3/4 of today loading and unloading firewood into the back of my truck and a trailer.  It was a warm day, I was dirty, tired, sweaty, and my holster was rubbing against my side.  The leather and exposed metal snap was no longer comfortable. I'm thinking about adding a layer of something to that part of the holster to soften the contact.  Anything insulating will make it worse.  I don't want a sweaty, hotter holster against my skin.  I'm imagining something thin, breathable, that won't absorb sweat, and softer than leather, metal snaps, and rivets.   But I have no idea what would work. I'm hoping somebody else has already figured this out and I can just do what they did. Any suggestions appreciated.
    • Mr.Stu
      Light primer strikes

      By Mr.Stu · Posted

      Check the primers on the ammo you didn't shoot yet. Are they fully seated? If the primer is not just below flush with the back of the case, the first hit can seat it better then the second hit ignites it. 
×
×
  • Create New...