Jump to content
DblEGT

Best All-Around .22 Cal Semi-Auto Pistol under $400 ?? (POLL)

Best All-Around .22 Cal Semi-Auto Pistol under $400 ?? (POLL)  

139 members have voted

  1. 1. Best All-Around .22 Cal Semi-Auto Pistol under $400 ?? (POLL)

    • Smith & Wesson M&P 22
    • Ruger SR22
    • Sig/GSG 1911-22
    • Walther P22
    • Sig Mosquito
    • Ruger MkIII / 22/45
    • Beretta Neo
    • Browning Buckmark


Recommended Posts

Wow, I really don't get all the complaining about the Ruger MK II/III disassembly, cleaning and reassembly?!?!?! It takes me about 20 seconds to field strip my MK III hunter... just a few minutes to clean and then I can put it back together in under 30 or 40 seconds. Once you learn how to do it properly it's a piece of cake. My MK III has been awesome through at least 1,000 rounds... with no problems whatsoever. Just had 2 FTF's due to cheap crappy ammo. I don't think that you can get a better .22lr pistol in that price range than the Ruger MK's... and if you put some Volquartsen components into it, it becomes amazing. I've been accurate out to 100 yrds with my MK III shooting off hand.

Share this post


Link to post
Share on other sites

I always said I would never buy a Ruger Mk or 22/45 series pistol. I recently changed my mind as I noticed I saw one every range I went to, so there must be something to this! I put around 1k rounds thru a Ruger 22/45 MKIII. I was a little wary on buying mags as I wasn't sure to buy 22/45 or MKIII. So I bought 22/45 and they worked fine. My opinion has changed drastically on this pistol. I love it, it is so accurate and it feels and has kinda the same controls as a 1911. I also have the Sig 1911 and love that pistol too. I don't like the fact that the Ruger mags don't drop free. You can make them drop free with some parts. So if you are going to be plinking and want to be highly accurate get the Ruger. If you want to shoot OBRAMS, which I do, I will be using the Sig 1911. I say get them all or at least a few of them. Also have a S&W 617 revo and that is fun to shoot!!

Share this post


Link to post
Share on other sites

I would vote for SR22... but it's still at dealer as I am very very very very patiently await on my Instant check to finally come through..

 

I brought MK3 in shoe box back to dealer :) just could not deal with it... but it was before all the instructional videos on youtube.

Share this post


Link to post
Share on other sites

Best all round...

 

I would have to say a Ruger 22/45 Lite.

 

But, depending on what you want to do, the SR22 might be the ticket.

 

However, my favorite is the S&W M&P 22.

 

And, of course you cannot go wrong with any of these....

 

Ruger Mark II

Ruger Mark III Hunter

.22LR revolver (Ruger SP101, S&W 317, 617, Taurus 990, 992)

Buckmark

Share this post


Link to post
Share on other sites

I always said I would never buy a Ruger Mk or 22/45 series pistol. I recently changed my mind as I noticed I saw one every range I went to, so there must be something to this! I put around 1k rounds thru a Ruger 22/45 MKIII. I was a little wary on buying mags as I wasn't sure to buy 22/45 or MKIII. So I bought 22/45 and they worked fine. My opinion has changed drastically on this pistol. I love it, it is so accurate and it feels and has kinda the same controls as a 1911. I also have the Sig 1911 and love that pistol too. I don't like the fact that the Ruger mags don't drop free. You can make them drop free with some parts. So if you are going to be plinking and want to be highly accurate get the Ruger. If you want to shoot OBRAMS, which I do, I will be using the Sig 1911. I say get them all or at least a few of them. Also have a S&W 617 revo and that is fun to shoot!!

 

They should drop free when empty.

Share this post


Link to post
Share on other sites

They should drop free when empty.

 

The MK III series pistols have a magazine disconnect that subsequently prevent the magazine from dropping free after the last shot. Yes, they should drop free. That would be nice and make sense. However as a factual statement, they do not.

Share this post


Link to post
Share on other sites

Ruger MKIII's can be easily upgraded, modififed, with Volquartzen and aftermaket parts. You can modify it so the mag drops out when you release it and get rid of that stupid "chamber loaded" flag. That is what is making used MKII's so in demand.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.



  • olight.jpg

    Use Promo Code "NJGF10" for 10% Off Regular Items

  • Supporting Vendors

  • Latest Topics

  • Posts

    • I use an Alien Gear cloak tuck (IWB) with my Shield.  Neoprene back - in the summer it does feel warm but doesn't rub or chafe.   https://aliengearholsters.com/ruger-lcp-iwb-holster.html Could also go with the shapeshift as it has multiple options - OWB/IWB, Appendix... https://aliengearholsters.com/ruger-lcp-shapeshift-modular-holster-system.html
    • The  12-1 compression ratio L88 is long gone. This is GM's updated version. it might be  pump gas 10-1 engine The L88 was a aluminum head  cast iron block engine with a nasty solid lifter cam. the  ZL1 was a all aluminum  12 or 13-1 compression ratio engine with the best forged internal parts at the time and had a even nastier solid lifter cam 
    • I like my regular carry holster.  OWB leather with belt slots.  I've been carrying for over a year and it was comfortable and I hardly even noticed it.  I carry (usually) a Ruger LCP .380 - light, convenient, tiny. But...today I ended up taking it off an leaving it home after a few hours. I cut down a big maple tree a few days ago and I spent 3/4 of today loading and unloading firewood into the back of my truck and a trailer.  It was a warm day, I was dirty, tired, sweaty, and my holster was rubbing against my side.  The leather and exposed metal snap was no longer comfortable. I'm thinking about adding a layer of something to that part of the holster to soften the contact.  Anything insulating will make it worse.  I don't want a sweaty, hotter holster against my skin.  I'm imagining something thin, breathable, that won't absorb sweat, and softer than leather, metal snaps, and rivets.   But I have no idea what would work. I'm hoping somebody else has already figured this out and I can just do what they did. Any suggestions appreciated.
    • Check the primers on the ammo you didn't shoot yet. Are they fully seated? If the primer is not just below flush with the back of the case, the first hit can seat it better then the second hit ignites it. 
    • And, charging your car at home? We've got you covered! California braces for new electric plan: Make more, pay more | Fox Business
×
×
  • Create New...