-
Supporting Vendors
-
Latest Topics
-
-
Similar Content
-
By Travis
For sale is an Original Colt 601 Slick side upper. It has the original rear sight, ejection door, feed ramp and barrel nut. This upper has the larger diameter take down pin in the front so I will include the bushing to make it work on current lower receivers. Also included is a Nodak Spud Repro small triangle charging handle, it was $50 new but no longer available. Cost of upper includes shipping. These uppers on Gun Broker are $550 and do not include the charging handle. $400 OBO!
Ejection port cover is from a colt 607
-
By Lone Shark
Daniel Defense - DDM4-V7 - Rattlecan Cerakote Finish, .556 Semi-Auto Rifle, M-LOK, 16" Barrel.
Included with Rifle:
3 - Daniel Defense 10 rd. Mags.
Daniel Defense Muzzle Climb Mitigator, Gen II.
Magpul front and rear flip sights
BipodDeflector Brake Kit
Tipton Max Force carbon fiber cleaning rod.
Daniel Defense full-latch impact plastic case
380 rounds ammo.
Monmouth County Area - $2,960.
All Brand New - Never Fired - New Jersey Compliant
The first to post "I'll take it" wins the sale.
-
By Porthole
All magazines are sold.
As pictured, 11 magazines, 1911 45 ACP
6 are stamped with the Colt emblem and "Colt 45 AUTO M"
5 are stamped only with "COLT 45 AUTO"
Lightly used if at all.
$125.00 shipped priority mail CONUS.
Location Delaware
The first to post "I'll take it" establishes the buyer, PM after that.
-
By StanMan01
Looking to sell an AR-15 with the following specs:
Upper:
Barrel: PSA 18" .223 Wylde SS Barrel (1/7 Twist)
Comp: VG6 Comp Pin and Welded by Tier 1
Rail: PSA Lightweight 15" MLOK Rail
BCG: PSA 5.56 Nitride MPI Full-Auto Bolt Carrier Group purchased on October 9th 2020
Optics: Scope is not included. I can include an EoTech 512 with GG&G Lens Cover (Logo is plain GG&G Logo) with box for $355 if the buyer is interested (Eotech Sold)
Lower:
Receiver: PSA AR-15 Lower Safe/Fire purchased on October 20th 2020.
LPK: PSA Lower Parts Kit
Stock: RRA A2 Buttstock Kit, Black
Trigger: Geissele SSA-E Trigger ($240 Trigger) - Has 0 rounds on it, Purchased on October 23rd. Can include original MilSpec take-off trigger
Pistol Grip - Have a replacement Hogue OverMolded Pistol Grip that will be included
Magazines:
2 - 10rd PMags Included
Ammo:Depending on Buyer need I can sell .223 or 5.56 (XM193 or XM855) at cost
Misc. Accessories: CMMG .22lr Conversion Kit unused with 10rd mag - $120 (Only looking to sell with the AR at the moment)
Rounds Count:
Upper has about 250 rounds down the pipe
Lower: Maybe 50 Rounds
Price: $SOLD
Location: Essex or Monmouth County FFL
Buyer must have FID and matching Driver License. Transfer will abide by all state/federal laws
First "I'll take it" gets it
Can provide additional photos upon request.
-
By Swizz70
Hello Gents,
I'm selling my (like new) AR mid length complete upper receiver chambered in 300BLKOUT 7.62 × 35mm manufactured by Special Ops Tactical. Only put approximately 100 rounds through it. For those of you who don't know, this basically will fit on most AR lowers and uses the same AR magazines but gives you a .30 caliber (7.62 x 35) by just swapping the upper receiver if you are looking for a heavier load and more knock down power for hunting etc. (obviously state laws apply). I'm only selling it because I ended up buying a complete .30 caliber rifle.
Here are some specs:
300 BLK Out Nitride - 14.5″ Pinned to 16" Overall Midlength Upper
GPX 12.6" MLOK Free Floating Rail System with continuous 1913 Picatinny rail on top
Muzzle Brake Original "Black Magic" 30 Cal (pinned & welded NJ legal).
{Nitride} M4 Extended Feed Ramps
Nitride M4 Barrel Extension
1:7 Twist Rate
5/8×24 Thread Pitch
Raptor Charging Handle
Price: $695
Pm or email me with any questions: [email protected]
I am in Deptford NJ.
THE FIRST TO POST "I'LL TAKE IT" WINS THE SALE.
A "PM sent" DOES NOT ESTABLISH THE SALE. If you want the item, post "I'll take it" and should the deal fall apart the seller can post "still available." Should you reach a negotiated price via PM then post "I'll take it per our PM(s)" on this thread.
-
-
Posts
-
I use an Alien Gear cloak tuck (IWB) with my Shield. Neoprene back - in the summer it does feel warm but doesn't rub or chafe. https://aliengearholsters.com/ruger-lcp-iwb-holster.html Could also go with the shapeshift as it has multiple options - OWB/IWB, Appendix... https://aliengearholsters.com/ruger-lcp-shapeshift-modular-holster-system.html
-
By silverado427 · Posted
The 12-1 compression ratio L88 is long gone. This is GM's updated version. it might be pump gas 10-1 engine The L88 was a aluminum head cast iron block engine with a nasty solid lifter cam. the ZL1 was a all aluminum 12 or 13-1 compression ratio engine with the best forged internal parts at the time and had a even nastier solid lifter cam -
By maintenanceguy · Posted
I like my regular carry holster. OWB leather with belt slots. I've been carrying for over a year and it was comfortable and I hardly even noticed it. I carry (usually) a Ruger LCP .380 - light, convenient, tiny. But...today I ended up taking it off an leaving it home after a few hours. I cut down a big maple tree a few days ago and I spent 3/4 of today loading and unloading firewood into the back of my truck and a trailer. It was a warm day, I was dirty, tired, sweaty, and my holster was rubbing against my side. The leather and exposed metal snap was no longer comfortable. I'm thinking about adding a layer of something to that part of the holster to soften the contact. Anything insulating will make it worse. I don't want a sweaty, hotter holster against my skin. I'm imagining something thin, breathable, that won't absorb sweat, and softer than leather, metal snaps, and rivets. But I have no idea what would work. I'm hoping somebody else has already figured this out and I can just do what they did. Any suggestions appreciated. -
Check the primers on the ammo you didn't shoot yet. Are they fully seated? If the primer is not just below flush with the back of the case, the first hit can seat it better then the second hit ignites it.
-
And, charging your car at home? We've got you covered! California braces for new electric plan: Make more, pay more | Fox Business
-
-