Jump to content
Sign in to follow this  
MosinRob

shooting anvil's

Recommended Posts

World Anvil Shooting Society National Anvil Shooting Contest

Perhaps it's going too far to call anvil shooting a sport, but Gene Mulloy, an old-time blacksmithing buff and co-founder of the World Anvil Shooting Society definitely disagrees. You see, in 1994 he organized the first anvil shooting competition in the nation, which has become an annual event at Laurel's Wood Expo held every April in Mississippi. "Anvil shooting dates back to the Civil War," he says, "when all them damn Yanks came through the South destroying all of our metal-working capabilities. They'd put powder underneath the anvils and try to blow them up. And up they went, up in the air." Now a small group of explosion enthusiasts from Mississippi and area states gather to compete for bragging rights in the South.

The rules are simple: shooters' anvils must be made of steel, weigh at least 100 pounds and no more than 2 pounds of black powder can be used to send that thing soaring. Two classes exist, those who shoot Traditional and those who shoot Super Modified. In the Traditional class, shooters use real, antique anvils. At the base of every anvil there is a hollow spot, where powder and a 90-second cannon fuse are packed. Then a second anvil is placed on top of the first. Once the fuse is ignited, the shooter has to haul ass to make it out of the 300-foot danger zone. "The first time I shot it went about two feet high," Mulloy admits. While anvils shot the traditional way now reach heights up to 100 feet, for some that just wasn't high enough -- hence the humble beginnings of the Super-Modified category. Not only can shooters in this class smith their own specialty anvils, but they are shot from heavy base plates that enhance height and accuracy.

At the beginning, Mulloy had trouble deciding how to measure height. "The first year, we tried tying a fishing line from a rod and reel to the anvil," he says. "But it just blew that thing all to heck." Then he got a little more sophisticated, had some local mathematicians clock the airtime. But that wasn't very accurate. Now he uses surveying equipment that offers precise readings. Then there's accuracy, which is measured by how far away from the launch pad the anvil lands. As odd as it seems, no one has ever been crushed by a falling anvil and no one has ever lost an arm to explosives.

While Mulloy calls himself the #1 anvil shooter in America, he doesn't hold the world record. You can say it's a sore spot. The world record is just over 400 feet and held by rival Mike Stringer. In fact, the competition is so heated between these two that Mulloy recently played a cruel trick on Stringer. He built an illegal aluminum alloy anvil that he shot over 800 feet. "His reaction was gorgeous," Mulloy says. "It was priceless. And we got it all on video. It still rubs him raw when I tell him I have the world record." Admission to the Expo is $2.

 
 
April 7-8

LAUREL

MISSISSIPPI FORESTRY AND WOOD PRODUCTS EXPO

Enjoy two full days of equipment demonstrations, exhibits, lumberjack 
contests, arts and crafts, food, an anvil-shooting contest. Included is the 
MSU Wood Magic Science Fair. Laurel Fairgrounds. Admission. 
Contact: Economic Development Authority of Jones County, P.O. Box 
527, Laurel, MS 39441 (601) 649-3031

 

Share this post


Link to post
Share on other sites

It's about as RED NECK as you're ever gonna see as far as a competition goes, lol!  Some farmers still use the holy black to help with "stump removal".  I consider THAT requiring more BALLS than anvils, since pieces of stump tend to go in all directions.  Anvils is the ultimate "shaped charge school of HIGHER learning"!

 

Dave

Share this post


Link to post
Share on other sites

NJKen, if you can get big anvils, check with me first, I might buy them from you! I need a heavy op anvil.

Will do.  A buddy of mine is closing his fathers steel fabrication business.  I know there are several very old ancient anvils over there.

Ken

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.



  • olight.jpg

    Use Promo Code "NJGF10" for 10% Off Regular Items

  • Supporting Vendors

  • Latest Topics

  • Posts

    • I use an Alien Gear cloak tuck (IWB) with my Shield.  Neoprene back - in the summer it does feel warm but doesn't rub or chafe.   https://aliengearholsters.com/ruger-lcp-iwb-holster.html Could also go with the shapeshift as it has multiple options - OWB/IWB, Appendix... https://aliengearholsters.com/ruger-lcp-shapeshift-modular-holster-system.html
    • The  12-1 compression ratio L88 is long gone. This is GM's updated version. it might be  pump gas 10-1 engine The L88 was a aluminum head  cast iron block engine with a nasty solid lifter cam. the  ZL1 was a all aluminum  12 or 13-1 compression ratio engine with the best forged internal parts at the time and had a even nastier solid lifter cam 
    • I like my regular carry holster.  OWB leather with belt slots.  I've been carrying for over a year and it was comfortable and I hardly even noticed it.  I carry (usually) a Ruger LCP .380 - light, convenient, tiny. But...today I ended up taking it off an leaving it home after a few hours. I cut down a big maple tree a few days ago and I spent 3/4 of today loading and unloading firewood into the back of my truck and a trailer.  It was a warm day, I was dirty, tired, sweaty, and my holster was rubbing against my side.  The leather and exposed metal snap was no longer comfortable. I'm thinking about adding a layer of something to that part of the holster to soften the contact.  Anything insulating will make it worse.  I don't want a sweaty, hotter holster against my skin.  I'm imagining something thin, breathable, that won't absorb sweat, and softer than leather, metal snaps, and rivets.   But I have no idea what would work. I'm hoping somebody else has already figured this out and I can just do what they did. Any suggestions appreciated.
    • Check the primers on the ammo you didn't shoot yet. Are they fully seated? If the primer is not just below flush with the back of the case, the first hit can seat it better then the second hit ignites it. 
    • And, charging your car at home? We've got you covered! California braces for new electric plan: Make more, pay more | Fox Business
×
×
  • Create New...