Jump to content
when_shtf

Hearing Protection

Recommended Posts

I'm going to Heritage Guild to check out some hand guns. I've actually have never been to a range, but if I enjoy shooting there I can see myself going more often. When I shoot I always use foam plugs. But since I'll be dealing with a lot more noise, should I wear over-the-ear protection? If so, active or passive? Gun specific or general?

Share this post


Link to post
Share on other sites

I doubled up on my last range visit (indoors), and found it much better than over the ears alone. I felt a lot more focused and relaxed. YMMV

 

But I'm not a fan of loud noise in general -- I make an exception for firearms. :-)

 

 

Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites

I double up as well but you have to look at the DB ratings of your ear pro as some suppress more than others. Lately i've been using some Surefire Ep5 silicone ear plugs which are super comfy and suppress in teh upper 20's range (28 db NRR i believe). Then i use some thick passive muffs in the low 30's range to top it off. The thin ones are only good for low 20's db suppression so the thicker the better in this case but again, check your ratings to be sure.

Share this post


Link to post
Share on other sites

That photo of the range officer is GREAT.

 

I went to Heritage this morning. On my way I stopped off at Lowes and picked up some nice low-profile muffs (25 NRR) for $18. I used these with foam ear plugs.

 

I had a woman with a 9mm on my left and a guy with a 45 on my right and I was very comfortable.

 

Thanks for all of the help. I don't think I would have thought of double protection on my own.

Share this post


Link to post
Share on other sites

Had a question on Hearing Protection...

 

I understand that OSHA says noise protection is required at 140 decibels and that the typical gunshot noise rating is 160 or so decibels. So wearing plugs or muffs should reduce the decibels below the 140 range.

 

I have seen the decibel reduction for ear plugs around 30 decibels and the reduction for ear muffs at about 30 decibels. If you double up and use both do you get a decibel reduction of 60?

Share this post


Link to post
Share on other sites

While the use of ear plugs and muffs at the same time doubles your protection, I read in several places (http://www.coopersafety.com/NoiseReduction.aspx) that it doesn't actually provide db reduction of the total of the two combined. Someone also shared an interesting web page on hearing loss and the shooting sports. http://www.earsoftexas.com/hearingear_disorders/shooting.htm

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.



  • olight.jpg

    Use Promo Code "NJGF10" for 10% Off Regular Items

  • Supporting Vendors

  • Latest Topics

  • Posts

    • We never let then inside.  Last re-evaluation was 6-7 years ago, wife politely told him that he was welcome to look around the property and he could look in the windows. He saw two white resin chairs in the basement and told her that this constituted a finished basement. And everything in the basement is bare concrete/ cinder block, and mechanical systems. Nothing finished about it. Ultimately he relented and I'm sure that was a ploy to coerce us to allow him in
    • I use an Alien Gear cloak tuck (IWB) with my Shield.  Neoprene back - in the summer it does feel warm but doesn't rub or chafe.   https://aliengearholsters.com/ruger-lcp-iwb-holster.html Could also go with the shapeshift as it has multiple options - OWB/IWB, Appendix... https://aliengearholsters.com/ruger-lcp-shapeshift-modular-holster-system.html
    • The  12-1 compression ratio L88 is long gone. This is GM's updated version. it might be  pump gas 10-1 engine The L88 was a aluminum head  cast iron block engine with a nasty solid lifter cam. the  ZL1 was a all aluminum  12 or 13-1 compression ratio engine with the best forged internal parts at the time and had a even nastier solid lifter cam 
    • I like my regular carry holster.  OWB leather with belt slots.  I've been carrying for over a year and it was comfortable and I hardly even noticed it.  I carry (usually) a Ruger LCP .380 - light, convenient, tiny. But...today I ended up taking it off an leaving it home after a few hours. I cut down a big maple tree a few days ago and I spent 3/4 of today loading and unloading firewood into the back of my truck and a trailer.  It was a warm day, I was dirty, tired, sweaty, and my holster was rubbing against my side.  The leather and exposed metal snap was no longer comfortable. I'm thinking about adding a layer of something to that part of the holster to soften the contact.  Anything insulating will make it worse.  I don't want a sweaty, hotter holster against my skin.  I'm imagining something thin, breathable, that won't absorb sweat, and softer than leather, metal snaps, and rivets.   But I have no idea what would work. I'm hoping somebody else has already figured this out and I can just do what they did. Any suggestions appreciated.
    • Check the primers on the ammo you didn't shoot yet. Are they fully seated? If the primer is not just below flush with the back of the case, the first hit can seat it better then the second hit ignites it. 
×
×
  • Create New...