Bushnell 1-4x 24mm Throwdown PCL AR91424I $150 after rebate
By
MikeL, in Hot Deal Discussions
-
Recently Browsing 0 members
No registered users viewing this page.
-
Supporting Vendors
-
-
Latest Topics
-
-
Similar Content
-
By JerseyJim
I am interested in using a top rail adapter for semiauto 9mm. (see the attached example) We would like to have the option of using a reflex sight with a standard service type auto (Glock 17, Walther PPQ).
Does anyone have experience with these sort of adapters? Are they reliable, safe and keep the zero intact?
-
By Maksim
Just got an email, two days only, expiring tomorrow, an extra 10% off everything, including clearance at Natchez Shooting Supplies.
Use this link....
Enter Promo Code PO170622 at checkout.
-
By Howi
So for the most part I'm finished with my first ar. I'm still struggling with what optic to put on it. I am a good shot with iron sights out to 500 and went with the a2 upper and flip rear so I would always have that option. That being said I'd like to be spoiled and get an optic with a little magnification. I'm used to the trijicon rco with a chevron, but at 1100-1300 dollars I'm open for suggestions lol. I was also looking at eo tech holo sight with a magnifier, but seeing as I have never used one its lost on me. (I know they can be equally expensive, but I'm not so much worried about price as I am quality and applicability)
Some key points:
-target acquisition. Short and long
-durability (not gonna treat this rifle like a new born)
-how well it holds a zero
-if talking about optics using batteries please at least estimate battery life
Thanks for any suggestions or input/personal experience
-Jim
-
-
Posts
-
There is no press that you can just sit on a table. They need to be bolted down securely so there is no flexing. They do make complete stands that work good too. I agree with the fact that the Lee Classic turret is a great starter press. You cant realize the full speed of a progressive when you are first starting off. You NEED to go SLOW until you learn the ropes.
-
Single stage will have a tighter tolerance, and you have more control over the process. Progressives are for bulk range fodder. Every experienced reloader gave me the same advice when I was getting into the hobby, start with single stage, so you can truly understand the reloading process and what you have to do on your end to make great ammo. Once you have mastered that, then you can think about a progressive. If you want to add a bit of convenience to your single stage reloading, a turret press (rotates the dies, not the shell plate) is probably better suited. It is still effectively a single stage operation, but you don't have to keep removing and remounting dies. I'm not sure what you mean by this. Whatever press you get, it will have to be secured to a work surface in some way. I bought an inexpensive 20"x20" work surface from HF to permanently mount my shotshell press on. It is mounted very sturdy and durable with the added 1/2" hardwood plank and extra big washers. If you haven't already, you should check out some of the reloading channels on YT. Ultimate Reloader is one of my faves, but there are scores of others with great advice. See it in action.
-
The 550 is not a true progressive as it does not auto index, right? I'm in the process of selling myself on a XL750. For a starter press, you can't go far wrong with a Lee Classic Turret. It is cheap, auto indexes, and swapping calibers is easy. NB. If you go for a manually indexed press and work multiple cartridges at once, be particularly careful to monitor the powder drop stage to avoid no powder or double charges. With an auto indexing press the risk is way lower.
-
The Dillon 550's are amazing machines. Plenty fast, and while there are faster machines in the Dillon lineup, the trade-off is that the faster ones take longer to change between calibers, and the caliber conversion kits are more expensive. You can use the 550 as a single stage press, one cartridge in the shell plate at a time, rotating between the stations after each handle pull. It's a good way to start out and gain experience. I've got a single stage press as well, used for larger rifle cartridges and the occasional oddball handgun cartridge that I don't shoot enough to justify the cost of a caliber conversion kit for the Dillon...but it sounds like those use cases aren't in your immediate future.
-
By Cheflife15 · Posted
Why is the single stage an advantage exactly? Could I not build them on the progressive?
-
-