-
Recently Browsing 0 members
No registered users viewing this page.
-
Supporting Vendors
-
-
Latest Topics
-
-
Similar Content
-
By RetNJ47
Selling my Troy A4 “Other” Firearm 5.56(.223) with Blast Shield (faux suppressor) and BA Hanson profile 11.3” precision barrel with Silencer Co ASR muzzle brake.
Had gunsmith remove pin and welded muzzle brake on stock 10.5” inch barrel. Upgraded to BA 11.3” performance barrel bringing OAL to 26.8 inches without pin and welded muzzle device. ASR threaded Silco brake added with 6” Blast Shield. Trigger/Feed Ramp polish job for smoother take up and crisp reset(for a Mil-Spec trigger). Only 40 rounds have been fired for testing and proper initial barrel break in using Modern Spartan Systems accuracy oil between shot cycles.
Full list of modifications:
-Ballistic Advantage Hanson Profile 5.56 chambered 11.3 inch Performance Series Barrel
-SilencerCo Muzzle Brake
-SDTA 6” Blast Shield
-SBA3 Brace (Black or possibly FDE available)
-Magpul Gen 2 BUIS and Vertical Foregrip
-CMMG Stainless Gas Tube
$1550
Located in Toms River with closest FFL being Weshoot/Shoreshot. Buyer responsible for transfer fee at FFL.
Still have stock barrel also if interested.
**Eotech Not Included** if interested it’s an EOtech EXPS2-0 and I have a G43 magnifier w/STS mount and Surefire light with pressure pad to go along with it.
-
By milkstatus
Price drop- Up for sale is a never fired BNIB STD MFG DP-12. Of course, all original accessories, packing etc. included. Located in Middlesex area . Buyer to have FID, matching DL and fill out COE. $1000 First I'll take it wins. Thanks!
-
By NewYorkCentralRailroad
Well folks, I'm back with another deal. I've seen what's been going on with 5.56 and .223 pricing, and I hate it as much as you do. I went to a gun show yesterday and people were selling Winchester Service Grade 5.56 for $0.65 per round for a 1000-round case. That's ludicrous, and AmmoSeek doesn't give much better prospects, so I'm here to give a few lucky people a deal. As of 10/23/2023, I will have in my possession 1500 rounds of Winchester White Box 5.56 in 150-round Range Packs. I don't need all of them, so I would like to give y'all some of them. The best deal for any 5.56 on AmmoSeek right now with free shipping is $0.51 per round for some Igman stuff.
I'm offering these packs at $73.50 per box, or $0.49 per round. That includes tax! This is the best price that I've found anywhere on the internet for LC 5.56. If you buy more, I might be able to work with you on the price a bit more. Again, I have 8 boxes right now, and will have a total of 10 boxes on Monday, so it's first come first serve. PM me to tell me how much you want, in multiples of 150. If you want all of it, first to post "I'll Take It" wins.
Ammo is currently in Philadelphia PA, but I can go anywhere on the PATCO, Atlantic City, SEPTA, or Northeast Corridor rail lines. I've delivered to Trenton and Pennsauken before, as well as all over SE PA. I also have a base in Essex County, if you live out there I can get there relatively easily too. I'm keeping the little Winchester stickers, sorry!
-
By NewYorkCentralRailroad
SOLD Hey, I told y'all that I had some ammo to sell, so here I go. I have a significant quantity of Nemo Arms branded PPU 5.56 55 grain FMJBT ammunition, and I'm looking to get rid of some of it. I have 1000 rounds, but I'd like to keep 200ish rounds, so I'm open to selling up to 760 rounds to a buyer. I'm suggesting $260 for the full 760 rounds, making it $0.35 a round. If you want a different quantity or have an offer, shoot me a message.
I can go anywhere NJ transit rail goes, so if there's a NJ transit rail station local to you, odds are I can get there. I'm based out of Philadelphia, so anywhere on the Atlantic City or NEC rail lines I can get to with ease. I also have a base in Essex County, and I'll be up there weekend after next. First to say they want it gets it!
-
By ChrisS
Savior Equipment American Classic Tactical Double Long Rifle. 36” Model. I bought this from Amazon along with the single rifle case to decide which I liked better. I don’t feel like going through the hassle of returning as it was bought through a third party seller so I figured I’d knock 43ish% off the price ($70.36 incl tax) and pass it along to someone here that could use it. As new condition minus the tags. $40 cash and pick up in Freehold.
****** The first to post "I'll take it" establishes the buyer. If there are issues and the deal falls apart, the item may be re-listed. ****
-
-
Posts
-
We never let then inside. Last re-evaluation was 6-7 years ago, wife politely told him that he was welcome to look around the property and he could look in the windows. He saw two white resin chairs in the basement and told her that this constituted a finished basement. And everything in the basement is bare concrete/ cinder block, and mechanical systems. Nothing finished about it. Ultimately he relented and I'm sure that was a ploy to coerce us to allow him in
-
I use an Alien Gear cloak tuck (IWB) with my Shield. Neoprene back - in the summer it does feel warm but doesn't rub or chafe. https://aliengearholsters.com/ruger-lcp-iwb-holster.html Could also go with the shapeshift as it has multiple options - OWB/IWB, Appendix... https://aliengearholsters.com/ruger-lcp-shapeshift-modular-holster-system.html
-
By silverado427 · Posted
The 12-1 compression ratio L88 is long gone. This is GM's updated version. it might be pump gas 10-1 engine The L88 was a aluminum head cast iron block engine with a nasty solid lifter cam. the ZL1 was a all aluminum 12 or 13-1 compression ratio engine with the best forged internal parts at the time and had a even nastier solid lifter cam -
By maintenanceguy · Posted
I like my regular carry holster. OWB leather with belt slots. I've been carrying for over a year and it was comfortable and I hardly even noticed it. I carry (usually) a Ruger LCP .380 - light, convenient, tiny. But...today I ended up taking it off an leaving it home after a few hours. I cut down a big maple tree a few days ago and I spent 3/4 of today loading and unloading firewood into the back of my truck and a trailer. It was a warm day, I was dirty, tired, sweaty, and my holster was rubbing against my side. The leather and exposed metal snap was no longer comfortable. I'm thinking about adding a layer of something to that part of the holster to soften the contact. Anything insulating will make it worse. I don't want a sweaty, hotter holster against my skin. I'm imagining something thin, breathable, that won't absorb sweat, and softer than leather, metal snaps, and rivets. But I have no idea what would work. I'm hoping somebody else has already figured this out and I can just do what they did. Any suggestions appreciated. -
Check the primers on the ammo you didn't shoot yet. Are they fully seated? If the primer is not just below flush with the back of the case, the first hit can seat it better then the second hit ignites it.
-
-