Jump to content
45Doll

Sussex County Power Outages

Recommended Posts

For those of you who don't live in Sussex, Warren, Hunterdon or near the NY border, let me tell you it's a mess up here with the ice and snow.

Early Monday AM JCP&L listed less than 2,000 customers without power. By Monday night it was up to around 15,000. Last night it was over 35,000. This afternoon around 3 PM the count was below twenty, and now at 4 PM it's back up to 23,600. My point is we're not out of the woods by any stretch, and we're expecting 30 mph winds tomorrow without significant melting ahead of time. The trees are still ice bound. JCP&L says the ETR is 11:30 PM tomorrow night. I think that's a crock.

We lost power at 8:48 PM Sunday and got it back at 2:38 AM. Then down again at 1:31 PM Monday and back up at 8:24 PM. Down again at 11:18 PM, and up at 6:14 AM Tuesday. We've been up since then, but 70% of my township is still without power. Get the big picture here, if you haven't seen this before.

I finally got out to Newton today and the roads are a mess. But the number of trees/bushes/vines still hanging on the electric, cable and phone wires was unbelievable! It's incredible that the utilities let all this growth really impede on the wire paths. No, I don't expect them to denude the county of trees, but a lot of what I saw would be prevented by a simple topping or pruning.

Fortunately we have all disaster equipment in place and operating. Regardless, it's a pain in the ass!

/RantOff/

  • Informative 1
  • Sad 1

Share this post


Link to post
Share on other sites

I'd been told before that doing pruning as a preventative measure is paid for by the power companies. If they wait for a storm to knock down the lines, they get federal funding to do it; especially if a State of Emergency was declared.

I've been in your situation before, so I feel your pain. Good Luck.

Share this post


Link to post
Share on other sites

Here's the detail.

Andover Borough   109 of 447 customers without power (24%)
Andover Township   2,068 of 2,486 customers without power (83%)
Branchville Borough   26 of 560 customers without power (5%)
Byram Township  
111 of 3,536 customers without power (3%))
Frankford Township   261 of 2,118 customers without power (12%)
Franklin Borough   406 of 2,480 customers without power (16%)
Fredon Township   535 of 1,352 customers without power (40%)
Green Township   845 of 1,459 customers without power (58%)
Hamburg Borough   150 of 2,006 customers without power (7%)
Hampton Township   655 of 2,402 customers without power (27%)
Hardyston Township   821 of 3,782 customers without power (22%)
Hopatcong Borough   387 of 6,676 customers without power (6%)
Lafayette Township   424 of 824 customers without power (51%)
Montague Township   210 of 1,717 customers without power (12%)
Newton Town   861 of 3,849 customers without power (22%)
Ogdensburg Borough   847 of 988 customers without power (86%)
Sandyston Township   876 of 1,156 customers without power (76%)
Sparta Township   4,658 of 8,703 customers without power (54%)
Stanhope Borough   23 of 1,668 customers without power (1%)
Stillwater Township   860 of 2,134 customers without power (40%)
Sussex Borough   26 of 1,253 customers without power (2%)
Vernon Township   509 of 4,429 customers without power (11%)
Walpack Township   121 of 127 customers without power (95%)
Wantage Township   180 of 1,716 customers without power (10%)

Share this post


Link to post
Share on other sites

 

Finally got our power back about 4pm.   Almost exactly 48 hours on the Standby Generator.  There are still folks in my town without power.

We had 14 inches of snow on top of about an inch of frozen crud.  This really took a toll on trees.

 

 

Share this post


Link to post
Share on other sites

 

The lights at 515 and Canistear on 23 are out. 

Until they return, I suggest anyone avoid 23 southbound in the morning.    Miles of backup heading south this morning.

I left at 5:20am to avoid it.   It will be backed up from 515 into Hamburg before too long.

 

 

 

 

Share this post


Link to post
Share on other sites

Still no power. 

Shit was coming down on Sunday night around here, barely made it home from the airport. Monday looked like armageddon. 

Genset is working great, and the wood stove is burning all winter anyway. I grab gas on my way up rt15 after work, but have enough stored for at least a week.. JUST INCASE.

Just a fact of life living up here..

 

I saw them putting in the new main line pole yesterday for my street, our street actually has buried lines.. so once they get it hooked up, hopefully today, we should have power. 

 

As of this morning, most sideroads are still barely  passable, and your driving under trees still about to come down hanging on power lines.

 

 

Share this post


Link to post
Share on other sites

I got power back yesterday, but there are still a bunch of folks without it.  

My Generac Standby ran almost exactly 48 hours.   It used about 8 ounces of oil over that period.    I run synthetic and I haven't done an oil change on it for at least 3 years.    The recommended interval is 200 hours, but even with the exercises and now this outage, it is not near 200 hours.

I ordered a tune up kit and will do that whenever it arrives.

I posted a quick video of my trip down Canistear on Tuesday morning.   It looks like February.  Stupid clock is off by an hour.   The effective speed is 210mph ;)

 

  • Thanks 1

Share this post


Link to post
Share on other sites

I guess this will be my last word on the topic (I hope!). Power's been stable and the outage count is below 500 statewide.

One interesting observation. When I went by the JCP&L headquarters in Newton yesterday there was a state trooper in a patrol car at each driveway mouth. Perhaps some customers without power were getting (or threatening to get) a little too testy.

Share this post


Link to post
Share on other sites
10 minutes ago, 45Doll said:

I guess this will be my last word on the topic (I hope!). Power's been stable and the outage count is below 500 statewide.

One interesting observation. When I went by the JCP&L headquarters in Newton yesterday there was a state trooper in a patrol car at each driveway mouth. Perhaps some customers without power were getting (or threatening to get) a little too testy.

Well, JCP&L is a pathetic provider that does zero maintenance, so there is that.   Whenever we have an outage in my area, Sussex Rural gets us back pretty quick, JCP&L customers have to wait until Essex or other towns are restored before they bother with the plebes in Sussex.   I'm glad I'm not on them.   Bunch of pathetic assholes who don't trim trees or do basic maintenance on infrastructure.

 

 

 

 

Share this post


Link to post
Share on other sites
On 12/6/2019 at 7:48 PM, Malsua said:

Well, JCP&L is a pathetic provider that does zero maintenance, so there is that.   Whenever we have an outage in my area, Sussex Rural gets us back pretty quick, JCP&L customers have to wait until Essex or other towns are restored before they bother with the plebes in Sussex.   I'm glad I'm not on them.   Bunch of pathetic assholes who don't trim trees or do basic maintenance on infrastructure.

 

 

 

 

Around here they do line maintenance once a year around the main lines. 

They trim back trees, in fact they completely topped some large trees on a line that cuts through the woods next to my house. They seem to contract companies year round. I see them surveying at least twice a year in spring and summer. 

My power lines are buried from the main. I feel bad for the saps who are on side streets that barely get looked at.

But we live in the woods, technically.. so I dont expect much from them. 

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.



  • olight.jpg

    Use Promo Code "NJGF10" for 10% Off Regular Items

  • Supporting Vendors

  • Latest Topics

  • Posts

    • We never let then inside.  Last re-evaluation was 6-7 years ago, wife politely told him that he was welcome to look around the property and he could look in the windows. He saw two white resin chairs in the basement and told her that this constituted a finished basement. And everything in the basement is bare concrete/ cinder block, and mechanical systems. Nothing finished about it. Ultimately he relented and I'm sure that was a ploy to coerce us to allow him in
    • I use an Alien Gear cloak tuck (IWB) with my Shield.  Neoprene back - in the summer it does feel warm but doesn't rub or chafe.   https://aliengearholsters.com/ruger-lcp-iwb-holster.html Could also go with the shapeshift as it has multiple options - OWB/IWB, Appendix... https://aliengearholsters.com/ruger-lcp-shapeshift-modular-holster-system.html
    • The  12-1 compression ratio L88 is long gone. This is GM's updated version. it might be  pump gas 10-1 engine The L88 was a aluminum head  cast iron block engine with a nasty solid lifter cam. the  ZL1 was a all aluminum  12 or 13-1 compression ratio engine with the best forged internal parts at the time and had a even nastier solid lifter cam 
    • I like my regular carry holster.  OWB leather with belt slots.  I've been carrying for over a year and it was comfortable and I hardly even noticed it.  I carry (usually) a Ruger LCP .380 - light, convenient, tiny. But...today I ended up taking it off an leaving it home after a few hours. I cut down a big maple tree a few days ago and I spent 3/4 of today loading and unloading firewood into the back of my truck and a trailer.  It was a warm day, I was dirty, tired, sweaty, and my holster was rubbing against my side.  The leather and exposed metal snap was no longer comfortable. I'm thinking about adding a layer of something to that part of the holster to soften the contact.  Anything insulating will make it worse.  I don't want a sweaty, hotter holster against my skin.  I'm imagining something thin, breathable, that won't absorb sweat, and softer than leather, metal snaps, and rivets.   But I have no idea what would work. I'm hoping somebody else has already figured this out and I can just do what they did. Any suggestions appreciated.
    • Check the primers on the ammo you didn't shoot yet. Are they fully seated? If the primer is not just below flush with the back of the case, the first hit can seat it better then the second hit ignites it. 
×
×
  • Create New...