Jump to content

Recommended Posts

Does your garage get humid or moisture in it? You want to keep the moisture out. I keep a 40W light in mine with a can of the desiccant moisture remover. This combination works very well.

 

One would think it's the desiccant more so than the light, but the light will keep the temperature high enough that the oils/lubricants don't congeal.

Share this post


Link to post
Share on other sites

You want a dehumidifier to suck up the moisture. A dessicant. Something like this: http://www.amazon.com/Dry-Packs-Indicating-Silica-Aluminum-Canister/dp/B0025OO8DO/ref=sr_1_6?ie=UTF8&qid=1291434237&sr=8-6 Other dessicants may be better or better sized for your safe.

 

It changes colors as it absorbs moisture and you can put it in your oven to evaporate off the moisture and recharge the dessicant.

Share this post


Link to post
Share on other sites

You can use any type drying agent, the moisture level will determine how long they last. My safe came with 4 nice sized bags of drying agent, not sure what chemical, but usually is some sort of chloride. As far as i know they should do the trick since the air is stagnant in there, meaning moisture will only enter when you open it.

 

I would rather put my stuff in a damp basement with a dehumidifier for the room then a garage.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.



  • olight.jpg

    Use Promo Code "NJGF10" for 10% Off Regular Items

  • Supporting Vendors

  • Latest Topics

  • Posts

    • We never let then inside.  Last re-evaluation was 6-7 years ago, wife politely told him that he was welcome to look around the property and he could look in the windows. He saw two white resin chairs in the basement and told her that this constituted a finished basement. And everything in the basement is bare concrete/ cinder block, and mechanical systems. Nothing finished about it. Ultimately he relented and I'm sure that was a ploy to coerce us to allow him in
    • I use an Alien Gear cloak tuck (IWB) with my Shield.  Neoprene back - in the summer it does feel warm but doesn't rub or chafe.   https://aliengearholsters.com/ruger-lcp-iwb-holster.html Could also go with the shapeshift as it has multiple options - OWB/IWB, Appendix... https://aliengearholsters.com/ruger-lcp-shapeshift-modular-holster-system.html
    • The  12-1 compression ratio L88 is long gone. This is GM's updated version. it might be  pump gas 10-1 engine The L88 was a aluminum head  cast iron block engine with a nasty solid lifter cam. the  ZL1 was a all aluminum  12 or 13-1 compression ratio engine with the best forged internal parts at the time and had a even nastier solid lifter cam 
    • I like my regular carry holster.  OWB leather with belt slots.  I've been carrying for over a year and it was comfortable and I hardly even noticed it.  I carry (usually) a Ruger LCP .380 - light, convenient, tiny. But...today I ended up taking it off an leaving it home after a few hours. I cut down a big maple tree a few days ago and I spent 3/4 of today loading and unloading firewood into the back of my truck and a trailer.  It was a warm day, I was dirty, tired, sweaty, and my holster was rubbing against my side.  The leather and exposed metal snap was no longer comfortable. I'm thinking about adding a layer of something to that part of the holster to soften the contact.  Anything insulating will make it worse.  I don't want a sweaty, hotter holster against my skin.  I'm imagining something thin, breathable, that won't absorb sweat, and softer than leather, metal snaps, and rivets.   But I have no idea what would work. I'm hoping somebody else has already figured this out and I can just do what they did. Any suggestions appreciated.
    • Check the primers on the ammo you didn't shoot yet. Are they fully seated? If the primer is not just below flush with the back of the case, the first hit can seat it better then the second hit ignites it. 
×
×
  • Create New...