Jump to content
Sign in to follow this  
Malsua

A field guide to gun shows

Recommended Posts

I ran across this article this morning and found it had some truth and some humor in it.

 

---------

http://www.nrvoutdoors.com/GUNSHOW/A%20FIELD%20GUIDE%20TO%20GUN%20SHOWS.htm

 

A FIELD GUIDE TO GUN SHOWS

 

GUN%20SHOW%203.jpg

 

Gun shows are an old and honored American tradition. The basic idea-putting sellers, buyers, and stock in the same room and letting Free Market Forces go to work-is as old as commerce, but the American form of gun show has evolved its own manners, vocabulary, and etiquette.

 

Gun shows are run by and for dreamers. Every dealer who sets up a table seems to think that the people who attend are half-wits who will happily pay 25% more than manufacturer's suggested retail price for their goods; and all the attendees hold it as an article of faith that the exhibitors are desperate men who have come in the hopes of finally disposing of their stock at 30% less than wholesale cost.

 

In this environment it helps to have some idea what to expect; so for the benefit of those who are so unfortunate as never to have experienced this distinctively American form of mass entertainment, I offer this guide, the summation of what I've learned from 30 years of show-going. I've included a glossary of terms you'll need to know, and an introduction to some of the people you'll meet.

 

GUN SHOW GLOSSARY

GUN%20SHOW%202.jpg

 

The following terms apply to items offered for sale:

 

MINT CONDITION: In original condition as manufactured, unfired, and preferably in the original box with all manufacturer's tags, labels, and paperwork.

 

NEAR-MINT CONDITION: Has had no more than 5,000 rounds fired through it and it still retains at least 60% of the original finish. Surface pitting is no more than 1/8" deep, and both grip panels are in place. If it is a .22, some of the rifling is still visible.

 

MINTY: Very much like NEAR-MINT CONDITION except for the 6" long and 1/2" deep scratch.

 

VERY GOOD: Non-functional when you buy it, but you can probably get it to work if you replace 100% of the parts.

 

FAIR: Rusted into a solid mass with a shape vaguely reminscent of a firearm.

RELIC%202.jpg

 

TIGHT: In revolvers, the cylinder swings out, but you need two hands to close it again. For autoloaders, you must bang the front of the slide on a table to push it back.

 

REALLY TIGHT: In revolvers you cannot open the cylinder without a lever. Once it's open the extractor rod gets stuck halfway through its travel. On autoloaders, you need a hammer to close the slide.

A LITTLE LOOSE: In revolvers, the cylinder falls out and the chambers are 1/4" out of line when locked up. There is no more than 1/2" of end play. For autoloaders, the barrel falls out when the slide is retracted. If the barrel stays in place, the slide falls off.

 

GOOD BORE: You can tell it was once rifled and even approximately how many grooves there were.

 

FAIR BORE: Probably would be similar to GOOD BORE, if you could see through it.

 

NEEDS A LITTLE WORK: May function sometimes if you have a gunsmith replace minor parts, such as the bolt, cylinder, or barrel.

ARSENAL RECONDITIONED: I cleaned it up with a wire wheel and some stuff I bought at K-Mart.

 

ANTIQUE: I found it in a barn, and I think it dates from before 1960. Note that ANTIQUE guns are usually found in FAIR condition.

 

RELIC%203.jpg

RARE VARIANT: No more than 500,000 of this model were ever made, not counting the ones produced before serial numbers were required. Invariably, RARE VARIANTS command a premium price of 150% of BOOK VALUE.

 

BOOK VALUE: An ill-defined number that dealers consider insultingly low and buyers ridiculously high. Since no one pays any attention to it, it doesn't matter who is right.

 

IT BELONGED TO MY GRANDFATHER: I bought it at a flea market or yard sale two weeks ago.

 

CIVIL WAR RELIC: The vendor's great-grandfather knew a man whose friend once said he had been in the Civil War.

 

SHOOTS REAL GOOD: For rifles, this means at 100 yards it will put every shot into a 14" circle if there isn't any wind and you're using a machine rest. For handguns, three out of six rounds will impact a silhouette target at seven yards. In shotguns, it means that the full choke tube throws 60% patterns with holes no larger than 8" in them.

 

ON CONSIGNMENT: The vendor at the show does not own the gun. It belongs to a friend, customer, or business associate, and he has been instructed to sell it, for which he will be paid a commission. He has no authority to discuss price. The price marked is 50% above BOOK VALUE. All used guns offered for sale at gun shows, without exception, are ON CONSIGNMENT, and the dealer is required by his Code of Ethics to tell you this as soon as you ask the price. (A BATF study has proven that since 1934 there has never been a single authenticated case of a used gun being offered for sale at a gun show that was actually owned by the dealer showing it.)

I'LL LET IT GO FOR WHAT I HAVE IN IT: I'll settle for what I paid for it plus a 250% profit.

 

MAKE ME AN OFFER: How dumb are you?

 

TELL ME HOW MUCH IT'S WORTH TO YOU: I'll bet you're even dumber than you look.

 

PEOPLE YOU WILL MEET AT THE GUN SHOW

GUN%20SHOW%204.jpg

RAMBO: He's looking for an Ingram MAC-10, and wants to have it custom chambered in .44 Magnum as a back-up gun. For primary carry he wants a Desert Eagle, provided he can get it custom chambered in .50 BMG. He derides the .50 Action Express as a wimp round designed for ladies' pocket pistols. He has already bought three years' worth of freeze-dried MRE's from MARK, as well as seven knives. He is dressed in camoflage BDU's and a black T-shirt with the 101st AirBorne Division insignia, though he has never been in the Army. He works as a bag boy at Kroger's.

RAMBO.jpg

 

 

BUBBA: He needs some money, and has reluctantly decided to sell his Daddy's .30-30, a Marlin 336 made in 1961. He indignantly refuses all cash offers below his asking price of $475. Unable to sell it, eventually he trades it plus another $175 for a new-in-box H&R Topper in .219 Zipper. He feels pretty good about the deal.

 

GORDON: He is walking the aisles with a Remington Model 700 ADL in .30-06 on his shoulder. He's put an Uncle Mike's cordura sling and a Tasco 3x9 variable scope on it. A small stick protrudes from the barrel, bearing the words, "LIKE NEW ONLY THREE BOXES SHELLS FIRED $800." This is his third trip to a show with this particular rifle, which he has never actually used, since he lives in a shotgun-only area for deer.

 

DAWN: She is here with her boyfriend, DARRYL. At the last show, DARRYL bought her a Taurus Model 66 in .357 Magnum. She fired it twice and is afraid of it, but at DARRYL'S insistence she keeps it in a box on the top shelf of her clothes closet in case someone breaks in. She is dressed in a pair of blue jeans that came out of a spray can, a "Soldier of Fortune" T-shirt two sizes too small, and 4" high heels. DARRYL is ignoring her, but nobody else is.

DAWN%20SMALL.jpg

 

 

 

DARRYL: He has been engaged to DAWN for three years. He likes shotguns for defense, and he's frustrated that he can't get a Street Sweeper anymore. So he's bought a Mossberg 500 with the 18-1/2" barrel, a perforated handguard, and a pistol grip. He plans to use it for squirrel hunting when he isn't sleeping with it. He plans to marry DAWN as soon as he gets a job which pays him enough to take over the payments on her mobile home. His parole officer has no idea where he is at the moment.

 

ARNOLD: He is a car salesman in Charlottesville, Virginia. He has a passion for Civil War guns, especially cap-and-ball revolvers. He has a reproduction Remington 1858, and is looking for a real one he can afford. He owns two other guns: a S&W Model 60 and a Sauer & Sohn drilling with Luftwaffe markings that his grandfather brought home in 1945. He has no idea what caliber the rifle barrel on his drilling is, and he last fired the Model 60 five years ago.

 

DICK: He is a gun dealer who makes his overhead selling Jennings J-25's, Lorcin .380's, and H&R top-break revolvers. He buys the J-25's in lots of 1000 direct from the factory at $28.75 each, and sells them for $68.00 to gun show customers. He buys the H&R's for $10 at estate auctions and asks $85 for them, letting you talk him down to $78 when he is feeling generous. His records are meticulously kept: he insists on proper ID and a signature on the 4473, but he doesn't mind if the ID and the signature aren't yours. Other than his stock, he owns no guns and he has no interest in them.

ARLENE: She is DICK's wife. She hates guns and gun shows more than anything in the world. Her husband insists that she accompany him to keep an eye on the table when he's dickering or has to go to the men's room. She refuses to come unless she can bring her SONY portable TV, even though she gets lousy reception in the Civic Center and there isn't any cable. When DICK is away from the table, she has no authority to negotiate, and demands full asking price for everything. She doesn't know the difference between a rifle and a shotgun, and what's more, she doesn't care.

 

MARK: He doesn't have an FFL. He buys a table at the show to sell nylon holsters, magazines, T-shirts, bumber stickers, fake Nazi regalia, surplus web gear, MRE's and accessories. He makes more money than anyone else in the hall.

 

ALAN: He's not a dealer, but he had a bunch of odds and ends to dispose of, so he bought a table. On it he displays used loading dies in 7.65 Belgian and .25-20, both in boxes from the original Herter's company. He also has a half-box of .38-55 cartridges, a Western-style gun belt he hasn't been able to wear since 1978, a used cleaning kit, and a nickel-plated Iver Johnson Premier revolver in .32 S&W. He's asking $125 for the gun and $40 for each of the die sets. He paid $35 for the table and figures he needs to get at least that much to cover his expenses and the value of his time.

GERALD: He's a physician specializing in diseases of the rich. He collects Brownings, and specializes in High-Power pistols, Superposed shotguns, and Model 1900's. He has 98% of the known variations of each of these, and now plans to branch out into the 1906 and 1910 pocket pistols. He owns no handguns made after the Germans left Liege in 1944. He regards Japanese-made "Brownings" as a personal insult and is a little contempuous of Inglis-made High-Powers. He does not hunt or shoot. He buys all his gun accessories from Orvis and Dunn's.

 

KEVIN: He is 13, and this is his first gun show. His eyes are bugged out with amazement, and he wonders what his J.C. Higgins single-shot 20-gauge is worth. His father gives him an advance on his allowance so he can buy a used Remington Nylon 66. He's hooked for life and will end up on the NRA's Board of Directors.

Share this post


Link to post
Share on other sites

Hey....

 

GERALD: He's a physician specializing in diseases of the rich. He collects Brownings, and specializes in High-Power pistols, Superposed shotguns, and Model 1900's. He has 98% of the known variations of each of these, and now plans to branch out into the 1906 and 1910 pocket pistols. He owns no handguns made after the Germans left Liege in 1944. He regards Japanese-made "Brownings" as a personal insult and is a little contempuous of Inglis-made High-Powers. He does not hunt or shoot. He buys all his gun accessories from Orvis and Dunn's.

 

I have NEVER shopped at Dunn's.

Share this post


Link to post
Share on other sites

I've bought the following at gun shows in the Lehigh Valley over the past 5 years.

 

- Beef Jerkey

- Pizza (it was free)

- Knives

- Blanks

- Ammo cans (overpriced)

- Several Mole chest rig mag pouches - Great deal!

- Mags - only obscure stuff or needed right away

- Colt 1903 - very good deal

- Subsonic 9mm - only twice back when the good stuff was not available online. Price was not THAT bad.

- Hats

- M16 11.5" upper receiver, complete

- 2 x 50 round lanchester mags - Sten compatible, for my Sten converted M11/9. Overpriced but fun!

- Laser of unspecified wattage ;)

- LED flashlights

- Overpriced copper solvent

- Very nice Galco holster at a fair price

- Cheapo nylon holster for keeping EDC when not holstered

- Nylon holster for BUG

- Overpriced cleaning supplies

 

Not much when it comes to guns or ammo. There are people at the shows I have bought stuff from, but hasn't happened at the shows. My buddies walk out with AKs and handguns and stuff. Don't know where they get their money. Or how they could possibly find deals at these places.

Share this post


Link to post
Share on other sites

reminds me of the time a woman at the forks of the delaware tried to sell me a jersey legal bushmaster for 1400 used.

 

I've grown to like that show less over time. I hit it about once a year now when I am bored or want to chat with some of the vendors I know.

Share this post


Link to post
Share on other sites

I used to love going to shows down south. There was always a good deal somewhere.. or the people watching would be pure entertainment. Between the guys dressed up as German Soldiers, to bangers to hotties to the dealers themselves. It was always a good $7 invested. It seems the shows in the philly area leave something to be desired.

Share this post


Link to post
Share on other sites

I have been to Valley Forge Gun Show twice. Most of that is spot on. Since they are close to philly I think they need to add...

 

TYRONE- 22 year old gang banger who is wearing Timberland boots or Nike sneakers, a white Tshirt and a basesball cap. He is only looking at compact and subcompact Glocks. When he speaks with a vendor he drops his slang talk and tries to pretend he is a "sportsman"

Share this post


Link to post
Share on other sites

Hmmm, Just to give you a heads up not everyone who wears "Timberland boots or Nike sneakers, a white Tshirt and a baseball cap" is a gang member. You will most likely catch me with that on during the weekend at the range or just hanging out but I work for a corporate company.

 

Now if you said with gold teeth and pants hanging down to his knees then I might have to agree with you.

Share this post


Link to post
Share on other sites

Hmmm, Just to give you a heads up not everyone who wears "Timberland boots or Nike sneakers, a white Tshirt and a baseball cap" is a gang member. You will most likely catch me with that on during the weekend at the range or just hanging out but I work for a corporate company.

 

Now if you said with gold teeth and pants hanging down to his knees then I might have to agree with you.

 

 

I wasn't trying to be too obvious...

Share this post


Link to post
Share on other sites

I find plenty of deals at shows. If you don't want to go that's fine by me, it will be less crowded and there will be better selection for me. :lol: :lol: :lol:

 

If you do find anything worth while hook me up. LOL

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.



  • olight.jpg

    Use Promo Code "NJGF10" for 10% Off Regular Items

  • Supporting Vendors

  • Latest Topics

  • Posts

    • We never let then inside.  Last re-evaluation was 6-7 years ago, wife politely told him that he was welcome to look around the property and he could look in the windows. He saw two white resin chairs in the basement and told her that this constituted a finished basement. And everything in the basement is bare concrete/ cinder block, and mechanical systems. Nothing finished about it. Ultimately he relented and I'm sure that was a ploy to coerce us to allow him in
    • I use an Alien Gear cloak tuck (IWB) with my Shield.  Neoprene back - in the summer it does feel warm but doesn't rub or chafe.   https://aliengearholsters.com/ruger-lcp-iwb-holster.html Could also go with the shapeshift as it has multiple options - OWB/IWB, Appendix... https://aliengearholsters.com/ruger-lcp-shapeshift-modular-holster-system.html
    • The  12-1 compression ratio L88 is long gone. This is GM's updated version. it might be  pump gas 10-1 engine The L88 was a aluminum head  cast iron block engine with a nasty solid lifter cam. the  ZL1 was a all aluminum  12 or 13-1 compression ratio engine with the best forged internal parts at the time and had a even nastier solid lifter cam 
    • I like my regular carry holster.  OWB leather with belt slots.  I've been carrying for over a year and it was comfortable and I hardly even noticed it.  I carry (usually) a Ruger LCP .380 - light, convenient, tiny. But...today I ended up taking it off an leaving it home after a few hours. I cut down a big maple tree a few days ago and I spent 3/4 of today loading and unloading firewood into the back of my truck and a trailer.  It was a warm day, I was dirty, tired, sweaty, and my holster was rubbing against my side.  The leather and exposed metal snap was no longer comfortable. I'm thinking about adding a layer of something to that part of the holster to soften the contact.  Anything insulating will make it worse.  I don't want a sweaty, hotter holster against my skin.  I'm imagining something thin, breathable, that won't absorb sweat, and softer than leather, metal snaps, and rivets.   But I have no idea what would work. I'm hoping somebody else has already figured this out and I can just do what they did. Any suggestions appreciated.
    • Check the primers on the ammo you didn't shoot yet. Are they fully seated? If the primer is not just below flush with the back of the case, the first hit can seat it better then the second hit ignites it. 
×
×
  • Create New...