Jump to content
Bob B

Tip Up Or Tip Down

Recommended Posts

I've come to prefer knives that have a pocket clip that puts the knife in a tip up position. I find it much easier to open with one hand, which is a big benefit because it lets you keep using your non-dominant hand. But, I've also noticed that most folding knives that have pocket clips are tip down, or so it seems to me. Anyone else notice this? I was looking for a nice custom folding knife and I'm having a heck of a time finding one that is tip up. Seems like anything that has a handle made of something nice, it's tip down. ...or is there a trick to opening a tip down knife with one hand without having to flip it around in your hand.

Share this post


Link to post
Share on other sites

My preference is tip up. Generally speaking tho, the trick with either carry method is thumb placement. With a little bit of practice either up or down is workable. That said, most decent knives allow you to switch the clip for tip up or tip down.

 

Regarding custom folders that offer tip up, look for custom Emerson's - they're almost always configured for tip up, especially if they have the "wave" feature. Strider's are also almost always tip up.

 

Some examples:

http://www.ebosshoss...tom-cqc-10-1715

 

http://www.ebosshoss...-wdamascus-1712

 

http://www.arizonacu...ex.php?id=22348

 

http://www.theknifec...sp?item_id=1693

 

Just some random examples that google turned up.

 

ETA: and yes, custom knives can be RIDICULOUSLY expensive.

Share this post


Link to post
Share on other sites

I have been using a ghetto waved Benchmade Griptillian (tip up) for 5 or 6 years now. In my opinion it gives me the best compromise between in fight weapon access, daily utility, and compliance with NJ laws.

 

Here is an article Chris Fry of MDTS wrote a while back about carry knives http://www.mdtstrain...20Selection.pdf which touches upon the tip up/down issue.

 

If you ever want to test tip up/down, I have a Benchmade Griptillian trainer which can be set up either way, and I am happy to get together with you for some light force on force testing of which way is easier to access under stress or in fight.

 

I will tell you in advance that a centerline mounted fixed blade wins over any folder.

Share this post


Link to post
Share on other sites

Always had it tip down. I like grasping at the hinge between thumb and forefinger, pulling up to my palm and opening with my thumb. A tip up knife seem like there is an extra step to get the handle situated for opening. The first move in opening is grasping as I said above and a quick rotating pivot of the wrist as as the kife is uncliped, putting the handle in my palm. I should also say that on my knife the blade opens to the front when tip down in my pocket.

 

But I guess it depends on how you want it to be in your hand when open. I open it with the blade out from the forefinger side of the hand, if I wanted it on the pinky side I would have to flip it.

Share this post


Link to post
Share on other sites

Here is an article Chris Fry of MDTS wrote a while back about carry knives http://www.mdtstrain...20Selection.pdf which touches upon the tip up/down issue.

 

Good article. It confirms my thinking about tip up vs. tip down.

 

Always had it tip down. I like grasping at the hinge between thumb and forefinger, pulling up to my palm and opening with my thumb. A tip up knife seem like there is an extra step to get the handle situated for opening. The first move in opening is grasping as I said above and a quick rotating pivot of the wrist as as the kife is uncliped, putting the handle in my palm. I should also say that on my knife the blade opens to the front when tip down in my pocket.

 

But I guess it depends on how you want it to be in your hand when open. I open it with the blade out from the forefinger side of the hand, if I wanted it on the pinky side I would have to flip it.

 

That's part of what I was looking for - a technique for removing and opening a tip down knife. Your method makes sense. I tried it and it works, although for me, tip up brings the knife out in the palm of my hand with my thumb on the thumb stud. Tip down, using your method, I have to adjust my grip after pulling it out.

Share this post


Link to post
Share on other sites

 

That's part of what I was looking for - a technique for removing and opening a tip down knife. Your method makes sense. I tried it and it works, although for me, tip up brings the knife out in the palm of my hand with my thumb on the thumb stud. Tip down, using your method, I have to adjust my grip after pulling it out.

 

I have my knife fully in my pants pocket and clipped on the pocket edge. I am guesing you have yours on your belt?

Share this post


Link to post
Share on other sites
Guest

Tip down....but does depend on the knife.....i get a better/more dexterous grip on the knife when I can get my thumb deep on the scales and the other fingers on the clip prior to deployment...to me it is better than just finger tip control as is common when deploying from a tip up carry...

 

 

Ymmv

Share this post


Link to post
Share on other sites

I've come to prefer knives that have a pocket clip that puts the knife in a tip up position. I find it much easier to open with one hand, which is a big benefit because it lets you keep using your non-dominant hand. But, I've also noticed that most folding knives that have pocket clips are tip down, or so it seems to me. Anyone else notice this? I was looking for a nice custom folding knife and I'm having a heck of a time finding one that is tip up. Seems like anything that has a handle made of something nice, it's tip down. ...or is there a trick to opening a tip down knife with one hand without having to flip it around in your hand.

 

 

If/when I carry a folder that's larger than my Swiss Army Executive, it's my Benchmade Mini-Griptillion, which carries in your pocket with a "tip-up" configuration, which I prefer. I can get it from my pocket and opened easily with one hand.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.



  • olight.jpg

    Use Promo Code "NJGF10" for 10% Off Regular Items

  • Supporting Vendors

  • Latest Topics

  • Posts

    • I use an Alien Gear cloak tuck (IWB) with my Shield.  Neoprene back - in the summer it does feel warm but doesn't rub or chafe.   https://aliengearholsters.com/ruger-lcp-iwb-holster.html Could also go with the shapeshift as it has multiple options - OWB/IWB, Appendix... https://aliengearholsters.com/ruger-lcp-shapeshift-modular-holster-system.html
    • The  12-1 compression ratio L88 is long gone. This is GM's updated version. it might be  pump gas 10-1 engine The L88 was a aluminum head  cast iron block engine with a nasty solid lifter cam. the  ZL1 was a all aluminum  12 or 13-1 compression ratio engine with the best forged internal parts at the time and had a even nastier solid lifter cam 
    • I like my regular carry holster.  OWB leather with belt slots.  I've been carrying for over a year and it was comfortable and I hardly even noticed it.  I carry (usually) a Ruger LCP .380 - light, convenient, tiny. But...today I ended up taking it off an leaving it home after a few hours. I cut down a big maple tree a few days ago and I spent 3/4 of today loading and unloading firewood into the back of my truck and a trailer.  It was a warm day, I was dirty, tired, sweaty, and my holster was rubbing against my side.  The leather and exposed metal snap was no longer comfortable. I'm thinking about adding a layer of something to that part of the holster to soften the contact.  Anything insulating will make it worse.  I don't want a sweaty, hotter holster against my skin.  I'm imagining something thin, breathable, that won't absorb sweat, and softer than leather, metal snaps, and rivets.   But I have no idea what would work. I'm hoping somebody else has already figured this out and I can just do what they did. Any suggestions appreciated.
    • Check the primers on the ammo you didn't shoot yet. Are they fully seated? If the primer is not just below flush with the back of the case, the first hit can seat it better then the second hit ignites it. 
    • And, charging your car at home? We've got you covered! California braces for new electric plan: Make more, pay more | Fox Business
×
×
  • Create New...