-
Use Promo Code "NJGF10" for 10% Off Regular Items
-
Supporting Vendors
-
-
Latest Topics
-
-
-
Similar Content
-
By Lone Shark
Daniel Defense - DDM4-V7 - Rattlecan Cerakote Finish, .556 Semi-Auto Rifle, M-LOK, 16" Barrel.
Included with Rifle:
3 - Daniel Defense 10 rd. Mags.
Daniel Defense Muzzle Climb Mitigator, Gen II.
Magpul front and rear flip sights
BipodDeflector Brake Kit
Tipton Max Force carbon fiber cleaning rod.
Daniel Defense full-latch impact plastic case
380 rounds ammo.
Monmouth County Area - $2,960.
All Brand New - Never Fired - New Jersey Compliant
The first to post "I'll take it" wins the sale.
-
By StanMan01
Looking to sell an AR-15 with the following specs:
Upper:
Barrel: PSA 18" .223 Wylde SS Barrel (1/7 Twist)
Comp: VG6 Comp Pin and Welded by Tier 1
Rail: PSA Lightweight 15" MLOK Rail
BCG: PSA 5.56 Nitride MPI Full-Auto Bolt Carrier Group purchased on October 9th 2020
Optics: Scope is not included. I can include an EoTech 512 with GG&G Lens Cover (Logo is plain GG&G Logo) with box for $355 if the buyer is interested (Eotech Sold)
Lower:
Receiver: PSA AR-15 Lower Safe/Fire purchased on October 20th 2020.
LPK: PSA Lower Parts Kit
Stock: RRA A2 Buttstock Kit, Black
Trigger: Geissele SSA-E Trigger ($240 Trigger) - Has 0 rounds on it, Purchased on October 23rd. Can include original MilSpec take-off trigger
Pistol Grip - Have a replacement Hogue OverMolded Pistol Grip that will be included
Magazines:
2 - 10rd PMags Included
Ammo:Depending on Buyer need I can sell .223 or 5.56 (XM193 or XM855) at cost
Misc. Accessories: CMMG .22lr Conversion Kit unused with 10rd mag - $120 (Only looking to sell with the AR at the moment)
Rounds Count:
Upper has about 250 rounds down the pipe
Lower: Maybe 50 Rounds
Price: $SOLD
Location: Essex or Monmouth County FFL
Buyer must have FID and matching Driver License. Transfer will abide by all state/federal laws
First "I'll take it" gets it
Can provide additional photos upon request.
-
By Swizz70
Hello Gents,
I'm selling my (like new) AR mid length complete upper receiver chambered in 300BLKOUT 7.62 × 35mm manufactured by Special Ops Tactical. Only put approximately 100 rounds through it. For those of you who don't know, this basically will fit on most AR lowers and uses the same AR magazines but gives you a .30 caliber (7.62 x 35) by just swapping the upper receiver if you are looking for a heavier load and more knock down power for hunting etc. (obviously state laws apply). I'm only selling it because I ended up buying a complete .30 caliber rifle.
Here are some specs:
300 BLK Out Nitride - 14.5″ Pinned to 16" Overall Midlength Upper
GPX 12.6" MLOK Free Floating Rail System with continuous 1913 Picatinny rail on top
Muzzle Brake Original "Black Magic" 30 Cal (pinned & welded NJ legal).
{Nitride} M4 Extended Feed Ramps
Nitride M4 Barrel Extension
1:7 Twist Rate
5/8×24 Thread Pitch
Raptor Charging Handle
Price: $695
Pm or email me with any questions: [email protected]
I am in Deptford NJ.
THE FIRST TO POST "I'LL TAKE IT" WINS THE SALE.
A "PM sent" DOES NOT ESTABLISH THE SALE. If you want the item, post "I'll take it" and should the deal fall apart the seller can post "still available." Should you reach a negotiated price via PM then post "I'll take it per our PM(s)" on this thread.
-
By Zigzag22
Hello, I am looking for somewhere to get my muzzle brake pinned on a budget. I am okay with shops in Southern NJ and PA.
If anyone has any advice it would be greatly appreciated!
Thank you!
-
By Blank
These will be in NJ Stores soon.
Description
100% MADE IN AMERICA. All MODMAT rifles are made from domestic parts and assembled in New Jersey. Fully NJ and Federally compliant when purchased as a FIREARM. Total OAL 26.1″ w/ SB Tactical SBA3 Brace in closed position CERAKOTE FINISH: Blackened Cobalt, Slate Grey Burgundy Bronze, Patriot Brown or Sniper Green. MM Exit 5.56 V2 Muzzle Brake virtually eliminates muzzle climb while shooting. Designed and manufactured in New Jersey. Has NATO grooves for installation of blast shield or silencer. Ballistic Advantage 5.56 Government Profile, 11.5″ Carbine length AR15, Modern Series Barrel. Machined from 4150 Chrome Moly Vanadium steel with a QPQ corrosion resistant finish and M4 feed ramp extension. Ballistic Advantage .750″ pinned Lo-Pro Gas Block with QPQ corrosion resistant finish. Modern Materiel 10″ ultralight free float hand guard – Full Picatinny top rail and M-LOK mounting in 3, 6 & 9 o’clock positions. Domestic 8620 M16 Bolt Carrier Group and 9310 bolt with QPQ corrosion resistant finish. Flattop Upper Receiver – 7075 T6 forged aluminum with ejection port cover and brass deflector. MM Lower Receiver – 7075 T6 forged aluminum with magwell texture and integrated trigger guard. Magpul MOE pistol grip with extended trigger reach for more precise trigger control. Magpul MOE MVG M-LOK vertical fore grip. SB Tactical™ Pistol Stabilizing Brace (SB3) – provides all of the advantages of a handgun, but with a third point of contact — adding greater stability, accuracy and control. Also includes: One 10/30-round Mission First Tactical (MFT) magazine.
-
-
Posts
-
Handloading is the only real way you can control the quality of all components used! Still no guarantee but I use only CCI primers and I am certain that the proper amount of a good quality powder is there. Not much else you can do! -
There is a lot of crappy factory ammo out there. A name like Remington and you cant even trust them with your life. A few different instructors told me that they have been seeing some real shit ammo too. For me...I'll continue to make my own. I know it works. ALL of them. -
-
By Cheflife15 · Posted
I think this ammo was bought during the pandemic where it seems like quality control went out the window. I should have taken a picture of the primers today after shooting. Some had some pretty deep indents. I shoot da/sa. The thing that was a bit alarming was sometimes it didn't go off on the second attempt of dropping the hammer and sometimes it did. -
It’s possible it’s the ammo. Try a box of something from Federal-Federal primers are known to be the ‘softest’. If you get misfires still, the gun is again the prime suspect of course you’ll ultimately want it to run with any ammo, but I’ve known revolvers that can’t seem to get to 100% ignition double action with any other primer
-
-
