-
Recently Browsing 0 members
No registered users viewing this page.
-
Supporting Vendors
-
-
Latest Topics
-
-
Similar Content
-
By ChrisS
Savior Equipment American Classic Tactical Double Long Rifle. 36” Model. I bought this from Amazon along with the single rifle case to decide which I liked better. I don’t feel like going through the hassle of returning as it was bought through a third party seller so I figured I’d knock 43ish% off the price ($70.36 incl tax) and pass it along to someone here that could use it. As new condition minus the tags. $40 cash and pick up in Freehold.
****** The first to post "I'll take it" establishes the buyer. If there are issues and the deal falls apart, the item may be re-listed. ****
-
By JT Custom Guns
Troy PAR (Pump Action Rifle)
.300 -or- .308
New in Box
FEATURES: -16" Melonite barrel -Troy Mid-evil Flash Hider -Fully Adjustable Troy Battleaxe Mil-Spec stock -Alpha-style handguard with full-length top rail -Troy BattleAx control grip -Standard trigger -Billet machined railed flat-top upper receiver -Billet machined lower receiver -M4 feed ramps -Mil-Spec hardcoat anodized finish -Manual lever safety with indicator markings on both sides of receiver -Full Size 10 round magazine 100% NJ & NY legal Cal for best P&A
100% NJ & NY Legal AR - Threaded BBL.,Flash Hider, Adj. Stock, ect.
-
By Blank
These will be in NJ Stores soon.
Description
100% MADE IN AMERICA. All MODMAT rifles are made from domestic parts and assembled in New Jersey. Fully NJ and Federally compliant when purchased as a FIREARM. Total OAL 26.1″ w/ SB Tactical SBA3 Brace in closed position CERAKOTE FINISH: Blackened Cobalt, Slate Grey Burgundy Bronze, Patriot Brown or Sniper Green. MM Exit 5.56 V2 Muzzle Brake virtually eliminates muzzle climb while shooting. Designed and manufactured in New Jersey. Has NATO grooves for installation of blast shield or silencer. Ballistic Advantage 5.56 Government Profile, 11.5″ Carbine length AR15, Modern Series Barrel. Machined from 4150 Chrome Moly Vanadium steel with a QPQ corrosion resistant finish and M4 feed ramp extension. Ballistic Advantage .750″ pinned Lo-Pro Gas Block with QPQ corrosion resistant finish. Modern Materiel 10″ ultralight free float hand guard – Full Picatinny top rail and M-LOK mounting in 3, 6 & 9 o’clock positions. Domestic 8620 M16 Bolt Carrier Group and 9310 bolt with QPQ corrosion resistant finish. Flattop Upper Receiver – 7075 T6 forged aluminum with ejection port cover and brass deflector. MM Lower Receiver – 7075 T6 forged aluminum with magwell texture and integrated trigger guard. Magpul MOE pistol grip with extended trigger reach for more precise trigger control. Magpul MOE MVG M-LOK vertical fore grip. SB Tactical™ Pistol Stabilizing Brace (SB3) – provides all of the advantages of a handgun, but with a third point of contact — adding greater stability, accuracy and control. Also includes: One 10/30-round Mission First Tactical (MFT) magazine. -
By remixer
Some In-Stock Items ready to go.
Sig Sauer M400 Elite Black 5.56 - $1099.00
Sig Sauer M400 Elite Titanium - $1199.00
Sig Sauer M400 Classic Black - $1149.00
Hi Point 10mm Carbine - $369.00
Hi Point 9mm Carbine w/Red dot - $299.00
Ruger PC10 Carbine 9mm - $499.00
CZ Usa 75BD 9mm - $575.00
CZ Usa SP01 9mm - $650.00
Beretta 92 Inox Italy - $690.00
Note: AR Pricing Includes all NJ Compliance work.
-
By remixer
Here are some of my recent arrivals worth mentioning.
LWRC DI 5.56 / 223
Modular One-Piece, Free-float Rail, Rail Panels, Angled Fore-grip and Hand Stop, Cold Hammer-Forged, Spiral Fluted 16.1 Barrel, Fully Ambidextrous Mag Release, Bolt Catch, & Selector. Price Includes all NJ Compliance work.
$1275.00
Sig Sauer M400 Elite 5.56 / 223
New Model for 2017, Aluminum M-Lok Hand guard, 16" 1:7 twist Barrel, Sig Enhanced Trigger,
Price includes all NJ compliance work.
$1100.00
Sig Sauer p320 9mm Full-size w/Contrast Sights (15rds)
Includes 2 Magazines , Plastic Case and Lock. Additional Magazines Available
$535.00
Sig Sauer p320 9mm Carry w/Contrast Sights (15rds)
Includes 2 Magazines , Plastic Case and Lock. Additional Magazines Available
$535.00
Hi-Point 9TS 9mm Carbine Black
$285.00
Hi-Point 9TS 9mm Carbine Camo
$325.00
-
-
Posts
-
We never let then inside. Last re-evaluation was 6-7 years ago, wife politely told him that he was welcome to look around the property and he could look in the windows. He saw two white resin chairs in the basement and told her that this constituted a finished basement. And everything in the basement is bare concrete/ cinder block, and mechanical systems. Nothing finished about it. Ultimately he relented and I'm sure that was a ploy to coerce us to allow him in
-
I use an Alien Gear cloak tuck (IWB) with my Shield. Neoprene back - in the summer it does feel warm but doesn't rub or chafe. https://aliengearholsters.com/ruger-lcp-iwb-holster.html Could also go with the shapeshift as it has multiple options - OWB/IWB, Appendix... https://aliengearholsters.com/ruger-lcp-shapeshift-modular-holster-system.html
-
By silverado427 · Posted
The 12-1 compression ratio L88 is long gone. This is GM's updated version. it might be pump gas 10-1 engine The L88 was a aluminum head cast iron block engine with a nasty solid lifter cam. the ZL1 was a all aluminum 12 or 13-1 compression ratio engine with the best forged internal parts at the time and had a even nastier solid lifter cam -
By maintenanceguy · Posted
I like my regular carry holster. OWB leather with belt slots. I've been carrying for over a year and it was comfortable and I hardly even noticed it. I carry (usually) a Ruger LCP .380 - light, convenient, tiny. But...today I ended up taking it off an leaving it home after a few hours. I cut down a big maple tree a few days ago and I spent 3/4 of today loading and unloading firewood into the back of my truck and a trailer. It was a warm day, I was dirty, tired, sweaty, and my holster was rubbing against my side. The leather and exposed metal snap was no longer comfortable. I'm thinking about adding a layer of something to that part of the holster to soften the contact. Anything insulating will make it worse. I don't want a sweaty, hotter holster against my skin. I'm imagining something thin, breathable, that won't absorb sweat, and softer than leather, metal snaps, and rivets. But I have no idea what would work. I'm hoping somebody else has already figured this out and I can just do what they did. Any suggestions appreciated. -
Check the primers on the ammo you didn't shoot yet. Are they fully seated? If the primer is not just below flush with the back of the case, the first hit can seat it better then the second hit ignites it.
-
-