Neted 0 Posted November 27, 2012 PD tells me my FID should be available in about 1 1/2 weeks so I need to seriously consider what my first purchase will be. I'm considering the 226 elite stainless 9mm for a number of reasons I like the 9mm ammo, the gun has an interchangeable .22 barrel(so my wife can shoot comfortably), it feels right in my hands, and looks good! Is there anything I'm missing? I've shot glocks and don't really like them. Any advise or recommendations would be appreciated. Thanks in advance Sent from my iPad using Tapatalk Quote Share this post Link to post Share on other sites
Dan 177 Posted November 27, 2012 Advice: get one. I have one sitting at my FFL waiting for my P2P to come in from the PD! Quote Share this post Link to post Share on other sites
jamesbod 0 Posted November 27, 2012 nice. can't go wrong. get some hogue G10 grips cause the wood looks thick... Quote Share this post Link to post Share on other sites
TheWombat 67 Posted November 27, 2012 I have a Sig P226 USPSA (beavertail, srt trigger, dawson/warren tactical sights) - you can see it here: http://njgunforums.com/forum/index.php?/topic/28114-sig-p226-uspsa/ I also have the .22 conversion kit which I have changed the sights on: http://njgunforums.com/forum/index.php?/topic/41818-sig-22-slide-aftermark-sight-review-spdtool-llc/ I've changed the grips to be Hogues as I much prefer their grippiness. I also sent the Sig to GrayGuns to have their ECLP package which makes a big difference on the trigger pull. If you have shot the Sig and like it, then go for it. Some people dislike where the slide release is as they rest their thumb on it and the slide doesn't lock back. I am competing in IDPA with my Sig - the DA/SA trigger takes some getting used to compared to a Glock, M&P, PPQ etc. I would suggest trying the M&P and PPQ as well if you are able to. hth TheWombat Quote Share this post Link to post Share on other sites
jamesbod 0 Posted November 27, 2012 the trigger is better than the striker fired ones but it doesn't come close to a 1911 though.... people often complain about training themselves on both DA & SA. I think it's really a non issue. how much longer does it really that to cock the trigger... Quote Share this post Link to post Share on other sites
lunker 274 Posted November 27, 2012 If you like steel guns, don't overlook CZs. Their slide-in-frame design makes them one of the most accurate non-custom pistols made today. The metal soaks up the recoil and the single action trigger can be made to be extremely nice. Stop by Heritage Firearm Guild in Rahway. From what I understand they have a lot of CZs and Sigs. Quote Share this post Link to post Share on other sites
jamesbod 0 Posted November 27, 2012 If you like steel guns, don't overlook CZs. Their slide-in-frame design makes them one of the most accurate non-custom pistols made today. The metal soaks up the recoil and the single action trigger can be made to be extremely nice. Stop by Heritage Firearm Guild in Rahway. From what I understand they have a lot of CZs and Sigs. some love the look of stainless vs carbon Quote Share this post Link to post Share on other sites
Pizza Bob 1,488 Posted November 27, 2012 I am competing in IDPA with my Sig - the DA/SA trigger takes some getting used to compared to a Glock, M&P, PPQ etc. If you have any inkling of doing the same, be aware that the stainless elite competes in ESP division. Wombat's has an alloy frame which allows him to compete in SSP division. May not mean anything to you now, but it may down the road. Unless your wife has large hands, Sig wood gripped double-stacks are really fat and will be tough for her to hold and reach the trigger and controls. The Hogue G-10's are smaller and the smallest is the Sig E2 grip. Have fun. Adios, Pizza Bob Quote Share this post Link to post Share on other sites
jamesbod 0 Posted November 27, 2012 If you have any inkling of doing the same, be aware that the stainless elite competes in ESP division. Wombat's has an alloy frame which allows him to compete in SSP division. May not mean anything to you now, but it may down the road. Unless your wife has large hands, Sig wood gripped double-stacks are really fat and will be tough for her to hold and reach the trigger and controls. The Hogue G-10's are smaller and the smallest is the Sig E2 grip. Have fun. Adios, Pizza Bob you know. those E grips look like they were designed for girls.... Quote Share this post Link to post Share on other sites
lunker 274 Posted November 27, 2012 some love the look of stainless vs carbon CZ makes them too. Blued = classic Stainless = meh Quote Share this post Link to post Share on other sites
n4p226r 105 Posted November 27, 2012 the trigger is better than the striker fired ones but it doesn't come close to a 1911 though.... people often complain about training themselves on both DA & SA. I think it's really a non issue. how much longer does it really that to cock the trigger... Why cock the trigger. Just point and pull. It cocks it for you. Quote Share this post Link to post Share on other sites
mcbethr 42 Posted November 27, 2012 IMHO, you can't go wrong with a Sig P226, Beretta 92FS or Glock 26. The P226 is a fine gun. Quote Share this post Link to post Share on other sites
mikeyboyeee 66 Posted November 27, 2012 I have a 226r in 9mm. Rail with night sights. I changed out the grips to the new E2. I have smallish hands and these work much better for me. It's a great gun. You wont be disappointed with it in any way. Quote Share this post Link to post Share on other sites
Wojo 98 Posted November 27, 2012 I have a 220 SAS II Compact 45 ACP (blued) and a 229 Platinum Elite 40cal which has a SS slide and black frame. I put black rubber grips on my 229 and have left the OEM 220 grips. I like sticky grips for OWB carry and the thinner hard plastic for IWB. The 220 being single stack works better IWB then the fatter 229. The sticky rubber tends to drag/ catch on my dress shirts more. The nice thing is using the same holsters for both. I also have the 22lr slide for my 229 and use that for practice quite a bit. Sub-sonics will render it a single shot, but a well placed shot on a vermin might be what you need at times. I LOVE 1911's for target shooting and precision work. I like my Glock 19C for shooting and carrying as a 2nd gun (or my LCP). The Sigs are the bomb. In a stressed environment there is a much less chance of forgetting to drop the lock like a 1911 and less of a chance of an accidental discharge like a Glock / XD or other striker fired set up when drawing your weapon. YMMV. But be assured, you will have chosen one of the best. FWIW - it is easy to reduce the trigger pull by changing out springs. The Elites are work the extra coin for the little finishing details the custom shop does for you. Enjoy it. Practice dry firing to get used to long trigger pull and you will be golden. Quote Share this post Link to post Share on other sites
bry@n 195 Posted November 27, 2012 Great gun and I have nothing negative to say. The gun with the added weight of the stainless frame with soak up recoil. As a side note, I believe this gun cn be ordered in stainless with the black finish if you like black better. I am not a fan of the wood grips. The feel slippery in my hands and I am a definite hogue g10 junkie. Quote Share this post Link to post Share on other sites
Jamie6607 0 Posted November 27, 2012 I've got a 226 with the E2 grips and night sights waiting at Caso's in Jersey City...word is my permits will be done on Friday. My SIG is coming home this weekend I hope! Quote Share this post Link to post Share on other sites
PeteF 1,044 Posted November 27, 2012 I have 226 stainless elite in .40, feels about the same as firing 92FS in 9m It is my favorite to shoot. Quote Share this post Link to post Share on other sites
spanky 1 Posted November 28, 2012 I have the MK25, love it. Good luck! Quote Share this post Link to post Share on other sites
johngo1 0 Posted November 28, 2012 I have the P226 TacOps in .40 you can't go wrong with a Sig. Only advise is if you can get the SRT trigger. Quote Share this post Link to post Share on other sites
NJSigfan 218 Posted November 28, 2012 I love my p226 elite. So far no issues and its eaten just about everything I've fed it. Quote Share this post Link to post Share on other sites
O-gre 7 Posted November 28, 2012 I have a enhanced elite 9mm and love it. I shoot much better with it then my P30. Quote Share this post Link to post Share on other sites
johnott 5 Posted November 28, 2012 I have a Sig P226R DAK in .40 and I love it. The DAK (DAO) trigger isn't a problem at 6.5lbs. It's the same trigger pull first time every time and it's nice and smooth. It's a decent size handgun with a little weight to it. Feels solid in your hand. The only issue (for some) is that the grip tends to be on the "fat" side because of the double-stack magazine. You can also modify the DAK trigger by replacing it with a short trigger (same 6.5lb. pull but shorter travel length). Quote Share this post Link to post Share on other sites
Zouave 13 Posted November 28, 2012 One thing I want to add is that Sig's has good customer service. About 4 months ago I had an issue with two mags that were over a year old. I sent them to Sig to look at and they sent me two brand new mags to replace them. I only had to pay to ship my original mags to them, which wasn't that much anyways. Pretty easy to deal with, didn't give me any hassles about it. New mags work fine in my P226 Elite in 9mm which I had bought used from another NJGF member. Shoots great! Quote Share this post Link to post Share on other sites
Neted 0 Posted November 29, 2012 Thanks for all the input. One more question, for those who use the interchangeable barrel. Are there any issues changing the barrel? Does the gun still have the same tight tolerances or is it loose? More jamming? Thanks in advance Sent from my iPad using Tapatalk Quote Share this post Link to post Share on other sites
jamesbod 0 Posted November 30, 2012 Thanks for all the input. One more question, for those who use the interchangeable barrel. Are there any issues changing the barrel? Does the gun still have the same tight tolerances or is it loose? More jamming? Thanks in advance you mean the 22 kit? the slide is probably alloy & the mag is sort of cheap. do yourself a favor & get a real 22 stainless revolver Quote Share this post Link to post Share on other sites
TheWombat 67 Posted November 30, 2012 I have the .22 kit on my Sig and have posted reviews on the forum. It pays for itself very quickly and I shoot a lot of .22 through my Sig. CCI mini mags work well, cheaper federal not so well. Magazines are a bit pricey and I would recommend the SigMan conversions on the magazines. I personally think the .22 conversion is a must have, particularly to help with training. TheWombat Quote Share this post Link to post Share on other sites
CageFighter 236 Posted November 30, 2012 i WANT the P226 Scorpion! Quote Share this post Link to post Share on other sites
BlueLineFish 615 Posted November 30, 2012 i WANT the P226 Scorpion! Me too..it will match my 1911 scorpion Quote Share this post Link to post Share on other sites
CageFighter 236 Posted November 30, 2012 Me too..it will match my 1911 scorpion or my SCARS, -lol. then the big brotha P220 will join the family! Quote Share this post Link to post Share on other sites
jcpg 4 Posted November 30, 2012 My only regret in getting my 226 is that I didn't get a stainless frame. I will always want an all stainless sig. Quote Share this post Link to post Share on other sites