Spikes Tactical Billet upper... sooo sexy..
By
Bugsy732, in AR Discussion
-
Recently Browsing 0 members
No registered users viewing this page.
-
Supporting Vendors
-
-
Latest Topics
-
-
Similar Content
-
By Travis
For sale is an Original Colt 601 Slick side upper. It has the original rear sight, ejection door, feed ramp and barrel nut. This upper has the larger diameter take down pin in the front so I will include the bushing to make it work on current lower receivers. Also included is a Nodak Spud Repro small triangle charging handle, it was $50 new but no longer available. Cost of upper includes shipping. These uppers on Gun Broker are $550 and do not include the charging handle. $400 OBO!
Ejection port cover is from a colt 607
-
By My1stGlock
I'm sure most of us in Central Jersey, Monmouth county know about Steve's compliance work but figured I put it out there for those that are looking for great work and reasonable prices.
Here's some pics of the brake up close and the pin/weld. That little dot is the pin and weld on the last image. Looks like factory! The other pics are just since I'm uploading anyways lol. What do u guys think about the red mag release. I'm on the fence on that. Gonna add a vertical foregrip and prob a red dot w/ irons when its all said and done.
-
By Lone Shark
Daniel Defense - DDM4-V7 - Rattlecan Cerakote Finish, .556 Semi-Auto Rifle, M-LOK, 16" Barrel.
Included with Rifle:
3 - Daniel Defense 10 rd. Mags.
Daniel Defense Muzzle Climb Mitigator, Gen II.
Magpul front and rear flip sights
BipodDeflector Brake Kit
Tipton Max Force carbon fiber cleaning rod.
Daniel Defense full-latch impact plastic case
380 rounds ammo.
Monmouth County Area - $2,960.
All Brand New - Never Fired - New Jersey Compliant
The first to post "I'll take it" wins the sale.
-
By StanMan01
Looking to sell an AR-15 with the following specs:
Upper:
Barrel: PSA 18" .223 Wylde SS Barrel (1/7 Twist)
Comp: VG6 Comp Pin and Welded by Tier 1
Rail: PSA Lightweight 15" MLOK Rail
BCG: PSA 5.56 Nitride MPI Full-Auto Bolt Carrier Group purchased on October 9th 2020
Optics: Scope is not included. I can include an EoTech 512 with GG&G Lens Cover (Logo is plain GG&G Logo) with box for $355 if the buyer is interested (Eotech Sold)
Lower:
Receiver: PSA AR-15 Lower Safe/Fire purchased on October 20th 2020.
LPK: PSA Lower Parts Kit
Stock: RRA A2 Buttstock Kit, Black
Trigger: Geissele SSA-E Trigger ($240 Trigger) - Has 0 rounds on it, Purchased on October 23rd. Can include original MilSpec take-off trigger
Pistol Grip - Have a replacement Hogue OverMolded Pistol Grip that will be included
Magazines:
2 - 10rd PMags Included
Ammo:Depending on Buyer need I can sell .223 or 5.56 (XM193 or XM855) at cost
Misc. Accessories: CMMG .22lr Conversion Kit unused with 10rd mag - $120 (Only looking to sell with the AR at the moment)
Rounds Count:
Upper has about 250 rounds down the pipe
Lower: Maybe 50 Rounds
Price: $SOLD
Location: Essex or Monmouth County FFL
Buyer must have FID and matching Driver License. Transfer will abide by all state/federal laws
First "I'll take it" gets it
Can provide additional photos upon request.
-
By Swizz70
Hello Gents,
I'm selling my (like new) AR mid length complete upper receiver chambered in 300BLKOUT 7.62 × 35mm manufactured by Special Ops Tactical. Only put approximately 100 rounds through it. For those of you who don't know, this basically will fit on most AR lowers and uses the same AR magazines but gives you a .30 caliber (7.62 x 35) by just swapping the upper receiver if you are looking for a heavier load and more knock down power for hunting etc. (obviously state laws apply). I'm only selling it because I ended up buying a complete .30 caliber rifle.
Here are some specs:
300 BLK Out Nitride - 14.5″ Pinned to 16" Overall Midlength Upper
GPX 12.6" MLOK Free Floating Rail System with continuous 1913 Picatinny rail on top
Muzzle Brake Original "Black Magic" 30 Cal (pinned & welded NJ legal).
{Nitride} M4 Extended Feed Ramps
Nitride M4 Barrel Extension
1:7 Twist Rate
5/8×24 Thread Pitch
Raptor Charging Handle
Price: $695
Pm or email me with any questions: [email protected]
I am in Deptford NJ.
THE FIRST TO POST "I'LL TAKE IT" WINS THE SALE.
A "PM sent" DOES NOT ESTABLISH THE SALE. If you want the item, post "I'll take it" and should the deal fall apart the seller can post "still available." Should you reach a negotiated price via PM then post "I'll take it per our PM(s)" on this thread.
-
-
Posts
-
For sale is a PWS Mk218 chambered in .308. Has a 18 inch barrel. Comes with a Radian charging handle, Magpul PRS Lite stock, grip and Angled fore grip. Also has a Geissele Automatics G2S Two Stage AR-15 Trigger and a POF Triple port muzzle brake. Only shot about 200 rounds. You can definitely get SUB MOA groups at 100 yards with this rifle using match ammo. Looking for $1800 but will consider all reasonable offers. Price doesn’t include the optic. Located in Union NJ. Willing to meet up within 45 mins of 07083. Any questions feel free to send me a PM.
-
By High Exposure · Posted
It’s an LCP. Throw it in a DeSantis Nemesis pocket holster on your strong side and get a Nemesis Mag holder for your support side pocket and call it a day. This is how I carry my LCP (I only carry it doing chores around the house, I wear a Glock 19 or 48 doing anything off property), I never even got a belt holster for it. If you want to keep it on your belt, wear an UnderArmor HeatGear type undershirt tucked into your pants. The material prevents the chafing, especially when sweaty and hot. I always wear a HeatGear so my AIWB/IWB carry doesn’t rub my skin. -
By xXxplosive · Posted
absolutely.....took us 10 minutes. -
By father-of-three · Posted
When I got my last Pennsylvania license to carry in 2013, I think the drive to get there was longer than the process!
-
-