FishNHard 145 Posted August 31, 2017 Mounting a vortex scope on my ba stealth , do you guys use any blue Loctite or do you just torque it , John Quote Share this post Link to post Share on other sites
Zeke 5,504 Posted August 31, 2017 Blue loctite gel 1 Quote Share this post Link to post Share on other sites
FishNHard 145 Posted August 31, 2017 Thanks for the help Zeke. 1 Quote Share this post Link to post Share on other sites
bhunted 887 Posted August 31, 2017 Mounting a vortex scope on my ba stealth , do you guys use any blue Loctite or do you just torque it , JohnBoth.....torque it to spec...Sent from my iPhone using Tapatalk 1 Quote Share this post Link to post Share on other sites
maintenanceguy 510 Posted August 31, 2017 I use locktite on the screws mounting the scope base to the gun. Those are very small and you can't really get much torque without risking stripping the threads. I don't locktite the screws that mount the scope. May not be right but it's what I do. Quote Share this post Link to post Share on other sites
Screwball 483 Posted August 31, 2017 I use locktite on the screws mounting the scope base to the gun. Those are very small and you can't really get much torque without risking stripping the threads. I don't locktite the screws that mount the scope. May not be right but it's what I do.Most mounts have torque specs for screws... usually inch/pounds. The way you don't strip the threads is using a torque driver, to the right spec.Put blue Loctite on the threads, torque, then good to go. Don't do red, blue is good enough for most firearm purposes. 3 Quote Share this post Link to post Share on other sites
Sevenshot 98 Posted August 31, 2017 Seeing a lot of people recommend using a torque driver lately. Is there one you recommend? I saw a few in the $50 range doing a quick search online. Quote Share this post Link to post Share on other sites
cnk 9 Posted August 31, 2017 I use a Wheeler torque driver at home and have a Borka for the range.Sent from my SM-T700 using Tapatalk Quote Share this post Link to post Share on other sites
Screwball 483 Posted August 31, 2017 I got a Husky one from Home Depot. Craftsmen from Sears is another option... which I have a larger one for automotive stuff.Wouldn't by a no-name brand. Quote Share this post Link to post Share on other sites
PeteF 1,044 Posted August 31, 2017 1 hour ago, Screwball said: I got a Husky one from Home Depot. Craftsmen from Sears is another option... which I have a larger one for automotive stuff. Wouldn't by a no-name brand. Just make sure its INCH POUNDS. Most of the sears/hd stuff is auto repair for torque in ft lbs. Quote Share this post Link to post Share on other sites
Lambo2936 297 Posted August 31, 2017 Conversions can be found online but get a 1/4" tq wrench. Small enough numbers to maintain some level of accuracy. Using a 1/2" torque wrench with big ftlb intervals may not be so accurate. Quote Share this post Link to post Share on other sites
bhunted 887 Posted August 31, 2017 This is what I use. Works very well.Wheeler Firearms Accurizing Torque Wrench https://www.amazon.com/dp/B0012AXR4S/ref=cm_sw_r_cp_api_T09Pzb96D2MHDSent from my iPhone using Tapatalk 2 Quote Share this post Link to post Share on other sites
Screwball 483 Posted August 31, 2017 Just make sure its INCH POUNDS. Most of the sears/hd stuff is auto repair for torque in ft lbs.Yep, which is why I said torque driver... never saw one in foot/pounds. Uses standard screwdriver bits.The one bhunted posted is another good option. Quote Share this post Link to post Share on other sites
oldguysrule649 397 Posted August 31, 2017 5 hours ago, bhunted said: This is what I use. Works very well. Wheeler Firearms Accurizing Torque Wrench https://www.amazon.com/dp/B0012AXR4S/ref=cm_sw_r_cp_api_T09Pzb96D2MHD Sent from my iPhone using Tapatalk I very recently purchased this torque wrench. I plan to use it this weekend when I mount my scope to my new Ruger Precision Rifle. I am confident I will be happy with this torque wrench. Ironically, I have used ft/lbs torque wrenches for automotive work for the last 40+ years but never owned an inch/lbs one. Better late than never. It will also help if I ever buy an RMR for my Glock 34 MOS. 1 Quote Share this post Link to post Share on other sites
Sevenshot 98 Posted August 31, 2017 I remember someone pointing out not to use loctite on polymer, only metal to metal. Said it was on the package warnings. Anyone know why? Quote Share this post Link to post Share on other sites
cnk 9 Posted August 31, 2017 I remember someone pointing out not to use loctite on polymer, only metal to metal. Said it was on the package warnings. Anyone know why?Loctite doesn't work on metal-to-plastic. It's only for metal-to-metal. If you need metal-to-plastic, you can use a drop of CA glue (crazy glue) That's what is used on my RC helicopters and cars if it's really needed. Otherwise, the friction from the plastic on the screw should be enough to hold it.Sent from my SM-T700 using Tapatalk 2 Quote Share this post Link to post Share on other sites
Pizza Bob 1,488 Posted August 31, 2017 Actually, Purple Loc-Tite is better suited for most firearms applications. 1 Quote Share this post Link to post Share on other sites
maintenanceguy 510 Posted August 31, 2017 The manufacturer's recommended torque doesn't guarantee the screws can't work themselves loose. Torquing the screws is good practice but adding a drop of locktite isn't going to cause any problems and it might prevent some. 30 minutes ago, Pizza Bob said: Actually, Purple Loc-Tite is better suited for most firearms applications. I thought purple was for hydraulic fitting threads. Thicker than blue or read - almost a gel. Quote Share this post Link to post Share on other sites
Screwball 483 Posted August 31, 2017 I remember someone pointing out not to use loctite on polymer, only metal to metal. Said it was on the package warnings. Anyone know why?Loctite is a brand of adhesives... and there are multiple types.The black 380 Loctite bonds metal and polymer. Commonly used on the "castle nut" on the KelTec SUB-2000. 1 Quote Share this post Link to post Share on other sites
Pizza Bob 1,488 Posted September 1, 2017 1 hour ago, maintenanceguy said: I thought purple was for hydraulic fitting threads. Thicker than blue or read - almost a gel. It is for fine threads and is less tenacious than blue. Quote Share this post Link to post Share on other sites