shooter28 153 Posted December 12, 2018 Now that there is something pretty to look at, here's the Poly80 G19 build Ive been working on. Zaffiri slide with RMR cut SLR magwell All internals are OEM Glock. Trigger came as part of the kit but will be replaced Next up on the list is: Zaffiri TiN threaded barrel Slide completion kit Ameriglo sights Trijicon RMR Trigger- deciding between Overwatch and Apex kits. Never messed with any aftermarket Glock trigger before so any input is welcome. I put these on my Xmas list so hopefully Santa is watching/listening...... 1 Quote Share this post Link to post Share on other sites
Ray Ray 3,566 Posted December 13, 2018 I am considering a 19 lower, which is the actual serial number yes? I do not want a 80% lower though, I would prefer a factory built 100% lower. Thanks for sharing Quote Share this post Link to post Share on other sites
shooter28 153 Posted December 13, 2018 Yes. The frame is the serialized part so a 100% lower would have to go thru a FFL. Quote Share this post Link to post Share on other sites
Zeke 5,504 Posted December 13, 2018 38 minutes ago, Ray Ray said: I am considering a 19 lower, which is the actual serial number yes? I do not want a 80% lower though, I would prefer a factory built 100% lower. Thanks for sharing Big Tex outdoor is where Mrs got her 34 lower. Quote Share this post Link to post Share on other sites
Ray Ray 3,566 Posted December 13, 2018 5 minutes ago, Zeke said: Big Tex outdoor is where Mrs got her 34 lower. Are these 100% lowers everywhere? I mean, are they hard to find? Quote Share this post Link to post Share on other sites
Zeke 5,504 Posted December 13, 2018 Just now, Ray Ray said: Are these 100% lowers everywhere? I mean, are they hard to find? Dunno. But I think his price was good or sumtin. Quote Share this post Link to post Share on other sites
Ray Ray 3,566 Posted December 13, 2018 1 minute ago, Zeke said: Dunno. But I think his price was good or sumtin. Show me Quote Share this post Link to post Share on other sites
Zeke 5,504 Posted December 13, 2018 Just now, Ray Ray said: Show me Ask her Quote Share this post Link to post Share on other sites
Ray Ray 3,566 Posted December 13, 2018 2 hours ago, Zeke said: Ask her I texted her, she hasn't responded. She ALWAYS texts me back quick. 1 Quote Share this post Link to post Share on other sites
High Exposure 5,664 Posted December 14, 2018 Here ya go Ray. G17 frame on top G19 frame on bottom Both are Gen 3 stripped frames in what Glock calls OD Green. I got them from Big Tex Outdoors for like $70 each. For another $70 you can get a Glock LPK. Ike is the man! 2 Quote Share this post Link to post Share on other sites
Zeke 5,504 Posted December 14, 2018 @Ray Ray Mrs got stickers from Ike 1 Quote Share this post Link to post Share on other sites
High Exposure 5,664 Posted December 14, 2018 Here’s the finished G19 on the bottom: She got me stickers too! And a cool BTO patch. Your wife is pretty rad. 2 Quote Share this post Link to post Share on other sites
Zeke 5,504 Posted December 14, 2018 Just now, High Exposure said: Here’s the finished G19 on the bottom: She got me stickers too! And a cool BTO patch. Your wife is pretty rad. I know Quote Share this post Link to post Share on other sites
Ray Ray 3,566 Posted December 14, 2018 Does Lone Wolf make a G19 lower? Quote Share this post Link to post Share on other sites
Screwball 483 Posted December 14, 2018 21 minutes ago, Ray Ray said: Does Lone Wolf make a G19 lower? They offer the Poly80s (with serial numbers), but the one they make (Timberwolf) is the full size .45/10mm. Quote Share this post Link to post Share on other sites
Ray Ray 3,566 Posted December 14, 2018 5 hours ago, Screwball said: They offer the Poly80s (with serial numbers), but the one they make (Timberwolf) is the full size .45/10mm. So, who does? Quote Share this post Link to post Share on other sites
Zeke 5,504 Posted December 14, 2018 4 minutes ago, Ray Ray said: So, who does? Glock Quote Share this post Link to post Share on other sites
Ray Ray 3,566 Posted December 14, 2018 Just now, Zeke said: Glock Gross Quote Share this post Link to post Share on other sites
Zeke 5,504 Posted December 14, 2018 2 minutes ago, Ray Ray said: Gross Jus sayen Quote Share this post Link to post Share on other sites
Zeke 5,504 Posted December 14, 2018 On 12/12/2018 at 2:57 PM, shooter28 said: Now that there is something pretty to look at, here's the Poly80 G19 build Ive been working on. Zaffiri slide with RMR cut SLR magwell All internals are OEM Glock. Trigger came as part of the kit but will be replaced Next up on the list is: Zaffiri TiN threaded barrel Slide completion kit Ameriglo sights Trijicon RMR Trigger- deciding between Overwatch and Apex kits. Never messed with any aftermarket Glock trigger before so any input is welcome. I put these on my Xmas list so hopefully Santa is watching/listening...... I think my wife got the overwatch 1 Quote Share this post Link to post Share on other sites
Rob0115 1,105 Posted December 17, 2018 I sincerely hope you are not finishing that lower within the confines of NJ. I had two of them and replaced them with factory frames from Big Texas Outdoors, @High Exposure recommendation. Just ordered a G3 34 lower cause I have a Zev slide that I can finish off now. 3 Quote Share this post Link to post Share on other sites
Zeke 5,504 Posted December 17, 2018 5 minutes ago, Rob0115 said: I sincerely hope you are not finishing that lower within the confines of NJ. I had two of them and replaced them with factory frames from Big Texas Outdoors, @High Exposure recommendation. Another big Tex outdoor? @High Exposure has to be getting a kickback 1 Quote Share this post Link to post Share on other sites
Rob0115 1,105 Posted December 17, 2018 3 minutes ago, Zeke said: Another big Tex outdoor? @High Exposure has to be getting a kickback I bought a 17 and 19 RTF frame when they had them for 79 bucks each stripped. I just ordered the 34 complete (no stripped option) because I had a spare Zev upper for it that I wanted to use. 2 Quote Share this post Link to post Share on other sites
High Exposure 5,664 Posted December 17, 2018 No Kickback. I’m just a helper. Good People+Good Business=Awesome Things 2 Quote Share this post Link to post Share on other sites
PK90 3,570 Posted December 17, 2018 Plenty of them on GunBroker for under $50 Quote Share this post Link to post Share on other sites
Rob0115 1,105 Posted December 17, 2018 Ordered at 2:24 and it shipped by 2:47. Quote Share this post Link to post Share on other sites
shooter28 153 Posted December 17, 2018 1 hour ago, Rob0115 said: I sincerely hope you are not finishing that lower within the confines of NJ. I had two of them and replaced them with factory frames from Big Texas Outdoors, @High Exposure recommendation. Just ordered a G3 34 upper cause I have a Zev slide that I can finish off now. Nope the 80% frame was cut and drilled for completion in a friendly state. 2 Quote Share this post Link to post Share on other sites
shooter28 153 Posted January 1, 2019 Update: Built the slide up so I now have a functioning weapon. Still need a iron sights and a red dot. Trigger will be replaced at some point as well. The only issue is the extractor. I have a billet extracts but it wouldn't seat all the way in the channel properly. Gotta figure out whats going on there. A factory extractor is in its place for now. Quote Share this post Link to post Share on other sites
Rob0115 1,105 Posted January 2, 2019 On 12/14/2018 at 7:50 AM, Ray Ray said: Does Lone Wolf make a G19 lower? The LW timber wolf frames I’ve seen are hit or miss. Get a factory glock frame for less money and no issues. They have 19x frames now too https://www.bigtexoutdoors.com/product/glock-oem-frames-stripped-complete-g17-g19/ 1 Quote Share this post Link to post Share on other sites
shooter28 153 Posted February 7, 2019 Got some more parts installed. Now that I have sights, Im hoping I get a chance to shoot it this weekend. Ameriglo Suppressor height sights. Single orange/green dot up front, blacked out rear. Tactical Pontoon Trigger- this thing is awesome. Ranger Proof trigger shoe, adjustable over travel, Ghost edge 3.5Lb connector, polished trigger bar. There is basically no uptake in the trigger. I might see if I can tighten it up a bit more. Very short, crisp reset as well. Quote Share this post Link to post Share on other sites