Jump to content
silverado427

Crock pot dinner pic. Not ribs

Recommended Posts

2 hours ago, Displaced Texan said:

And BTW, nice sear on that chuck roast.

the meat fell apart when you touched it with a fork. Very tender  I was in heaven

2 hours ago, Displaced Texan said:

And BTW, nice sear on that chuck roast.

 

Share this post


Link to post
Share on other sites

Jezus Christmas.  Boy, I say boy, ya doin' it all wrong son.  I mean, cast iron boy, that's the way civilized folk git it done.  Hot oil...  Searing... Smoke.... Ya can't caramelize meat in a crock pot boy, I say, it just can't be done.  Ya let'n all the flavor and juices and goodness run out'a that slab.  It's practically animal cruelty.

tumblr_nun6jpICFw1tf48o1o3_500.gif

EDIT:  FTR  All I saw was crock pot and was on a roll.  I missed the part where you seared it first.  Crock pot rage I guess.

Share this post


Link to post
Share on other sites
2 minutes ago, Scorpio64 said:

Jezus Christmas.  Boy, I say boy, ya doin' it all wrong son.  I mean, cast iron boy, that's the way civilized folk git it done.  Hot oil...  Searing... Smoke.... Ya can't caramelize meat in a crock pot boy, I say, it just can't be done.  Ya let'n all the flavor and juices and goodness run out'a that slab.  It's practically animal cruelty.

tumblr_nun6jpICFw1tf48o1o3_500.gif

He did sear it in a skillet....not cast iron, but a nice sear.

  • Like 1

Share this post


Link to post
Share on other sites
1 hour ago, Displaced Texan said:

He did sear it in a skillet....not cast iron, but a nice sear.

 

1 hour ago, Scorpio64 said:

EDIT:  FTR  All I saw was crock pot and was on a roll.  I missed the part where you seared it first.  Crock pot rage I guess.

 

Share this post


Link to post
Share on other sites
21 minutes ago, silverado427 said:

I had some leftovers for dinner.  No I don't have a cast iron skillet , But I did improvise. 

 

A cast iron skillet should be standard equipment In every kitchen. Most of mine are over 80 years old. One is near 100 as far as I can tell. 
 

Season it and treat it properly. It will NEVER wear out. I have one that is seasoned so well, I can heat it up, crack an egg in it, and swirl it around the skillet as if it were Teflon. Not a drop of oil.

  • Like 2

Share this post


Link to post
Share on other sites
1 hour ago, Displaced Texan said:

I have one that is seasoned so well, I can heat it up, crack an egg in it, and swirl it around the skillet as if it were Teflon

Cast iron is the original non stick surface, and it don't  poison people.  Anyone that sticks food to cast iron just don't know how to cook.  Wagner and Griswold ftw.

Share this post


Link to post
Share on other sites

I have both Wagner and Griswold. I also have a small skillet that was made in Taiwan. Its a bit of an oddball, it has a machined cooking surface, and isn’t as thick as my other skillets. It heats evenly, and cooks well though. 

45CE6B36-F2BF-4E46-91C5-C945F254C29A.jpeg

F48BB8F3-514A-4D3E-96B5-3BFD75DF0A86.jpeg

Share this post


Link to post
Share on other sites

They will if you don't treat 'em right, or are rejuvenating them.  The slotted broiler I bought was priced $10, which was a steal, but I talked the guy down to $5 because it was almost completely rusted.  Rust is not a problem with cast iron, in fact, much like rust blueing a gun, it can serve an important purpose.

Wash lightly, dry on the stove and wipe down with oil after completely dry, then let a little more heat sink in so the iron can soak up the oil and it will never rust.

  • Agree 1

Share this post


Link to post
Share on other sites

When I acquired some old cast iron from a relative, I put it in my oven on the ‘clean’ cycle. This stripped it down, removing all the old seasoning. 
I then washed and dried it by hand, and put it in the oven at 450° for an hour. 
After this, carefully remove it, and put a very thin coat of oil (or lard), all over it, wipe it down, and put it back in the oven for an hour or two. Do NOT use olive oil, the smoke point is too low. Flaxseed oil is great for this. 

This will form your first layer of seasoning. The more you cook with it, the better it will get. 
Never run it through the dishwasher, and never use dish soap on it. 
If you have food sticking, heat your pan up a little, add a little oil and kosher salt, and use that to scrub the food out. 
Rinse it out, put it on the stove, and heat it up to dry it out. Then put a very thin coat of oil on it. 
Over time, you won’t have to do that, as the layers of seasoning build up. 
 

As I said before, I have some skillets that are as non stick as a Teflon pan. 
 

Edited to add: Flaxseed oil is what I use. Not peanut oil. 

  • Like 1

Share this post


Link to post
Share on other sites

Most of my skillets are seasoned so well I don’t have to scrub with anything other than hot water and a paper towel. 
 

When I DO get something stuck to one, I wash out everything I can with hot water, and put the pan back on the stove over medium heat. I’ll squirt a little bit of canola oil in the pan and a bit of coarse kosher salt. The idea is to make a paste, and use a paper towel to scrub out the stuck bits. 
After that, I’ll wash out the skillet with hot water again, place on the burner to dry it out. I’ll then give it a very thin coat of oil while the pan is hot. 
 

It sounds like a lot of trouble, but it’s really not. This takes maybe 5 mins. And it doesn’t remove the seasoning. 
I’ve never used a chain mail pad. 
 

  • Agree 1
  • Informative 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.



  • olight.jpg

    Use Promo Code "NJGF10" for 10% Off Regular Items

  • Supporting Vendors

  • Latest Topics

  • Posts

    • We never let then inside.  Last re-evaluation was 6-7 years ago, wife politely told him that he was welcome to look around the property and he could look in the windows. He saw two white resin chairs in the basement and told her that this constituted a finished basement. And everything in the basement is bare concrete/ cinder block, and mechanical systems. Nothing finished about it. Ultimately he relented and I'm sure that was a ploy to coerce us to allow him in
    • I use an Alien Gear cloak tuck (IWB) with my Shield.  Neoprene back - in the summer it does feel warm but doesn't rub or chafe.   https://aliengearholsters.com/ruger-lcp-iwb-holster.html Could also go with the shapeshift as it has multiple options - OWB/IWB, Appendix... https://aliengearholsters.com/ruger-lcp-shapeshift-modular-holster-system.html
    • The  12-1 compression ratio L88 is long gone. This is GM's updated version. it might be  pump gas 10-1 engine The L88 was a aluminum head  cast iron block engine with a nasty solid lifter cam. the  ZL1 was a all aluminum  12 or 13-1 compression ratio engine with the best forged internal parts at the time and had a even nastier solid lifter cam 
    • I like my regular carry holster.  OWB leather with belt slots.  I've been carrying for over a year and it was comfortable and I hardly even noticed it.  I carry (usually) a Ruger LCP .380 - light, convenient, tiny. But...today I ended up taking it off an leaving it home after a few hours. I cut down a big maple tree a few days ago and I spent 3/4 of today loading and unloading firewood into the back of my truck and a trailer.  It was a warm day, I was dirty, tired, sweaty, and my holster was rubbing against my side.  The leather and exposed metal snap was no longer comfortable. I'm thinking about adding a layer of something to that part of the holster to soften the contact.  Anything insulating will make it worse.  I don't want a sweaty, hotter holster against my skin.  I'm imagining something thin, breathable, that won't absorb sweat, and softer than leather, metal snaps, and rivets.   But I have no idea what would work. I'm hoping somebody else has already figured this out and I can just do what they did. Any suggestions appreciated.
    • Check the primers on the ammo you didn't shoot yet. Are they fully seated? If the primer is not just below flush with the back of the case, the first hit can seat it better then the second hit ignites it. 
×
×
  • Create New...