Jump to content
KpdPipes

OK, Someone talk me out of a .38 Super

Recommended Posts

Found the basis for a .38 Super Open-class 1911 on one of the auction sites for a REALLY Sweet price. It looks like it needs some work, maybe a new barrel and trigger job, both of which i can do myself, already has an optic rail installed..all in all it SEEMS like a right place at the right time thing. Any thoughts???

Share this post


Link to post
Share on other sites

Don't do it. No. Forget about it.. walk away... Wait... you say it has an optics rail? A really sweet price? You are in the market for a Open Class 1911? OK just buy it. ;p

Share this post


Link to post
Share on other sites

If it is a 1911 your call.

If it is a 2011, all depends on the price, but I would consider a 9major "open" gun. Brass is so much cheaper and if you use it in USPSA or something else, have fun finding the brass.

Share this post


Link to post
Share on other sites

I don't know much about 38 super so all I have is this:

can you get the ammo for a reasonable price at most sportig goods stores? If the answer to either is "no" then my follow up is; are you a reloader? If no still is the answer then you may want to look into something else.

That's all I have.

Share this post


Link to post
Share on other sites

You don't want it. Too hard to find ammo, takes up soo much time to reload. Frustrating when you lose that expensive brass at the range. Just forget all about it....right after you send me the link to the auction. :D

Share this post


Link to post
Share on other sites

Every time someone makes a bid the clock resets to 15 min...if somneone waits till ONE second before it ends and makes a bid..it resets the clock. Finally won it at $675.00 + $25.00 shipping

Share this post


Link to post
Share on other sites

Don't you mean .38 special?

 

 

John Dillinger at one point in his criminal carrear used 38 super. It was said he preferd the round becuse it went through car doors and vests beter the 45acp did. This is a photo of a gun John Dillinger used, A machine pistol 1911 with a thompshon handle in 38 super.

 

400px-1911Full.jpg

  • Like 3

Share this post


Link to post
Share on other sites

link?

 

http://www.gunbroker.com/Auction/ViewItem.aspx?Item=231325340

 

Looks like it's going to need some work, but it can be my winter project for next year, plus that will give me time to build up componenets and work up a good load. I may keep it light and stick to Steel with it, rather than USPSA..haven't decided yet. Barrel, Bushing, Internals, Springs and a trigger job..... Brownells is going to LOVE Me this year LOL.

Share this post


Link to post
Share on other sites

John Dillinger at one point in his criminal carrear used 38 super. It was said he preferd the round becuse it went through car doors and vests beter the 45acp did. This is a photo of a gun John Dillinger used, A machine pistol 1911 with a thompshon handle in 38 super.

Wow, bravo sir :good:

  • Like 1

Share this post


Link to post
Share on other sites

LOL, If you saw the movie Public Enemies you can see the gun being used by Baby Face Nelson for a moment in the Little Bohemia shootout. Heres a better pic of the 38 super machine pistol.

 

untitled.jpg

  • Like 1

Share this post


Link to post
Share on other sites

well i know that auction ended but it was a single stack, youre not going to get the 27+ rounds most open guys will get. for steel it would be nice if you dont mind the tube for the red dot, the comp isnt all that great, but you mentioned a barrel change anyway.

here is what i have to say about 38 super. if you are not reloading dont bother with open till you do its not worth it. if you are new to reloading dont load 9 major it can be tricky you really need to know the why and why not for everything like slow vs fast powder, why a certain overall length, barrel config. ie supported chamber possibly openeing up the throat. there is many more but 38 super is much easier to load and make major, there are more powders and you dont have to load long, at least i didnt.

super brass is expensive its hard to find used brass so you have to use new and not get upset when you cant find it on the range. it gets worse when you shoot supercomp and starline is always on backorder so you have to buy more than you want to pay for cause you cant risk running out.

9 major is much more finicky and tricky, but when you know the ins and out 9major will be the way to go. so only buy 9major if you are really experienced with reloading, or you have a close friend who is willing to walk you through the steps.

Share this post


Link to post
Share on other sites

well i know that auction ended but it was a single stack, youre not going to get the 27+ rounds most open guys will get. for steel it would be nice if you dont mind the tube for the red dot, the comp isnt all that great, but you mentioned a barrel change anyway.

here is what i have to say about 38 super. if you are not reloading dont bother with open till you do its not worth it. if you are new to reloading dont load 9 major it can be tricky you really need to know the why and why not for everything like slow vs fast powder, why a certain overall length, barrel config. ie supported chamber possibly openeing up the throat. there is many more but 38 super is much easier to load and make major, there are more powders and you dont have to load long, at least i didnt.

super brass is expensive its hard to find used brass so you have to use new and not get upset when you cant find it on the range. it gets worse when you shoot supercomp and starline is always on backorder so you have to buy more than you want to pay for cause you cant risk running out.

9 major is much more finicky and tricky, but when you know the ins and out 9major will be the way to go. so only buy 9major if you are really experienced with reloading, or you have a close friend who is willing to walk you through the steps.

 

Thw one pictured in the above posts is from the FBI museum..it's the .38 Super Machine Pistol John Dillinger owned, NOT the one I purchased. The one I bought had no Comp, just a straight-crowned Kart Barrel. As for 27+ Rounds this is NJ, and im not going to risk my career for a game. IF I shoot uspsa with it it will be for fun with 10-rounders. Reloading, Yes i plan to, I'm not interested in 9-major and i'm well aware of the hazards with that I have a close friend who shoots 9-M open. So far I've found .38 super brass for around $150.00 per Thousand.

 

That said...i'm liking .38 Super more and more ballistics-wise. As I read more about it..I may have to build one up as an Off-duty piece.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.



  • olight.jpg

    Use Promo Code "NJGF10" for 10% Off Regular Items

  • Supporting Vendors

  • Latest Topics

  • Posts

    • For sale:   49 rounds of 7.62x54 Mosin ammo "Yellow Tip"  $25.00   43 rounds of .25 Auto.  Headstamp "RP 25 AUTO"  $15.00   Take it all for $35.00   Message me here or Led1013 at aol.com
    • I took down a deck that was attached to the house with a ledger board.  That area now needs to be re-sided.   Its a tough predicament because its such a small job, its only like 24 inches high by about 12 feet wide.  After 3 phone calls last fall i actualy got the guy who built the house to come by, he said "sure, i can do it when i get some down time".   I havent heard from him since. i get it.  its a small job.  I'm a pretty handy guy and out of desperation i could probably watch youtube videos and figure out how to patch this by myself but i think id get lost on trying to match the color and i only need a small amount of material i'd have no idea where to buy a small amount.  So i'm gonna try here if anybody knows a vinyl siding company who wouldnt mind doing what i suppose would be a 30 minute job.  I am fully aware that i would need to have his fee make it worth while for the project even though its such a small patch job.  
    • Thanks for the offer @High Exposure and hope you’re doing well.  I’ll be back in just under 2 weeks and we can all work something out. 
    • I bought the stainless Rossi lever carbine in .357 a few years ago, to match a bush rifle caliber to my revolvers. I'm pretty sure I paid under $400 at the time. Shoots sweet, reliable, more than accurate enough. When I was shopping for it I kept running into comments on gun forums (not this one, iirc) criticiziing the action compared to the Henrys, but I've never shot a Henry lever gun, and I guess I'm too dumb to notice any issues.
    • Interesting discussion. I have plenty of large, tall trees that I could affix antennae elements to . But then I'd be at the mercy of wind and lightning. Of course, a falling tree could easily take out an adjacent tower as well :-) My biggest mental obstacle with installing a tower is how to get all the pieces up the slope to the install point. A new tower is no doubt a pretty big expense, but I see them on FB Marketplace regularly for fairly cheap, provided the buyer takes the thing down.
×
×
  • Create New...