Sandy 44 Posted February 7, 2012 I have another 3 weeks before I can use my next P2P , so I have some time to shop I have very small hands . I'm 4'11 . I have shot my husband's S&W 686 ..the barrel is , I belive , 8 inches . I love the look of it , and I love the way the .357s slam out of it ..the problen is ergonomics. It is just too big for my hand. I have a very hard time reaching the trigger , and the pull is too hard in double action. Can't do it to save my life ( literally) . Now , I know the snub noses are super hard on the hands , not to mention less accurate , correct? So I'm not considering one . Basically looking for something that would fit a small hand ( or be easily modified to fit a small hand) ,ability to shoot .357 magnums , and maybe a lighter pull for double action ( that can be adjusted , yes?) . Are there many ( any) other women on the forum here ? Thanks! Quote Share this post Link to post Share on other sites
Krdshrk 3,877 Posted February 7, 2012 Yes there are other women - Froggy, Steph7, MrsWombat, etc. Ruger LCR is a great snubby to shoot - not too snappy either. There is a .357 version as well. Quote Share this post Link to post Share on other sites
autoxnyc 4 Posted February 7, 2012 Ruger SP101. Has small grips and can handle all the 357 you can feed it. Also try out the LCR, you'll be surprised how much milder it is to shoot 357s out of this snub nose compared to Smith snub nose wheel guns. The double action pull on this is by far the best out of box pull I've experienced. Quote Share this post Link to post Share on other sites
lunker 274 Posted February 7, 2012 If you are willing to look at used, look for S&W Model 19. K frame revolvers with service grips may be the best balanced revolvers ever made. Quote Share this post Link to post Share on other sites
Duppie 73 Posted February 7, 2012 I purchased the Taurus 605 with a 3 inch barrel for my wife as well as a HD firearm and she love it even when shooting .357 loads. Quote Share this post Link to post Share on other sites
Pizza Bob 1,488 Posted February 7, 2012 I'd suggest a S&W K-Frame, unless you intend to feed it a steady diet of magnum ammunition. The K-frame is the same grip size as Pete's L-frame 686, but on a slightly smaller frame - which should mean there would be a slightly shorter reach to the trigger - try before you buy. Various custom grips may also alleviate any fitment problems. I prefer Hogue mono-grips. They leave the backstrap of the grip frame exposed, which means no added distance to the trigger - of course it means nothing between your hand and the gun to absorb recoil also. K-frame .357's to consider: model 19 (blued) / model 66 (SS) - these both have adjustable sights model 13 (blued) / model 65 (SS) - these both have fixed sights As for trigger pull - you can alwyas shoot these in single-action mode. A truly fine D/A pull usually takes the intervention of a good gunsmith. Resist the urge to back-off the strain screw (front of grip frame - bears on the main spring) - it should be screwed in tight. If you want to go smaller yet, there have been 3" J-frame .357's (5-round cylinders) with adjustable sights - I believe there is (or was) one for sale in the marketplace. Trigger pull on the J-frame guns is generally worse than the larger frames. Adios, PIzza Bob Quote Share this post Link to post Share on other sites
Sandy 44 Posted February 7, 2012 Thanks , this gives me a starting point to start looking. If I really liked the gun , I would be willing to have a gunsmith work on the double action for me. How badly does accuracy suffer with a snubnose? I really like the look of the Model 66 and the Ruger SP101 - is the Ruger double action only ? I definitely want single/double. Should have said that PizzaBob - why blued? Just wondering If anyone has anything they would let me try at a range ( bullet hole , shore shot , brick armory ? ) , that would be great. You can try mine too lol Quote Share this post Link to post Share on other sites
NicePants 58 Posted February 7, 2012 Everyone else hit the nail on the head. If the L-frame is a bit too big, a K-frame smith would be awesome. You could get a J-frame if that's still a bit big, but .357 magnum (particularly hotter loads) are going to be a bit harder to manage in a smaller frame. Quote Share this post Link to post Share on other sites
autoxnyc 4 Posted February 7, 2012 SP101 is DA/SA. LCR is DAO. GP100 has a 3" version and you can get the older wood insert rubber grips which should work with smaller hands well. GP100 is probably the strongest 357 DA revolver out there. Quote Share this post Link to post Share on other sites
Pizza Bob 1,488 Posted February 7, 2012 How badly does accuracy suffer with a snubnose? PizzaBob - why blued? Just wondering If anyone has anything they would let me try at a range ( bullet hole , shore shot , brick armory ? ) , that would be great. You can try mine too lol A snub nose is as mechanically accurate as Pete's 8 3/8" L-frame. Whether you can shoot it as accurately is another thing altogether. Between the short sight radius, usually deficient sights, the increased muzzle flash and your anticipation of the recoil - most people tend not to be as accurate - but it's not the gun (tain't the arrow, but the Indian). Why blued? Because I'm older than Old School and there is nothing more beautiful than a rich, blue revolver. If you and Pete can get away during the week and want to do a PA gunshop tour, you are welcome to shoot my 19 (6") and/or my 15 (.38 Spl - 4") at Classic Pistol - one of 5 stops we can make. Adios, Pizza Bob Quote Share this post Link to post Share on other sites
Sandy 44 Posted February 7, 2012 Great , thanks ! I'll check with Pete on the road trip. I appreciate that . We have an 8 month old and all my babysitters work during the day ..unless you are around on Presidents Day ..maybe Pete will stay home with the kids. He owes me , I sent him to Winslow for the day We're talking Bucks County , right ? Quote Share this post Link to post Share on other sites
NicePants 58 Posted February 7, 2012 A snub nose is as mechanically accurate as Pete's 8 3/8" L-frame. Whether you can shoot it as accurately is another thing altogether. Between the short sight radius, usually deficient sights, the increased muzzle flash and your anticipation of the recoil - most people tend not to be as accurate - but it's not the gun (tain't the arrow, but the Indian). Why blued? Because I'm older than Old School and there is nothing more beautiful than a rich, blue revolver. If you and Pete can get away during the week and want to do a PA gunshop tour, you are welcome to shoot my 19 (6") and/or my 15 (.38 Spl - 4") at Classic Pistol - one of 5 stops we can make. Adios, Pizza Bob I'm younger than both of you and I couldn't agree more! Quote Share this post Link to post Share on other sites
Pizza Bob 1,488 Posted February 7, 2012 We're talking Bucks County , right ? Yep! Usual tour is: Surplus City and Classic Pistol - both in the Southampton/Feasterville area. Tanner's in Jamison. Target World in Chalfont and Quinby's in Dublin. Quote Share this post Link to post Share on other sites
Sandy 44 Posted February 7, 2012 Great ! I'll run it by Pete Thanks again. Quote Share this post Link to post Share on other sites
Underdog 1,593 Posted February 7, 2012 You cannot go wrong with a Smith and Wesson or Taurus revolver that fits you. Unless you are adamant about updating the sights, or are comfortable with spending more money for a S&W, then I would look for a used Ruger Six series, and my favorite of the three (Security Six, Speed Six and Service Six) is the Speed Six. It is a very solid and well-made revolver, and more beefy That a GP100. It is actually made better than a GP100. Ruger switched over because the GP series is cheaper to make. I mostly like it because it is in-between the size of a GP100 and SP101, and I feel that all of the Rugers are tough enough to last a lifetime. The Six will manage recoil extremely well, especially if you get a Hogue rubber grip for it, and it can be quite accurate. You would have to make sure the grip, trigger reach, weight, and hammer/trigger weight were suitable to you, and you would have to pretty much like the sights, but you would not go wrong with one of these. One in a 2.75 to 4" barrel would be just about perfect for what you want. You can probably find a Ruger Six for about $425 in perfect condition. I would certainly recommend you find one and handle it. I saw one on Gunbroker, locally. If you are interested PM me and I will give you the details. If you you said that you didn't want a smaller revolver, but I would check out the SP101 or the Ruger LCR and get either in the heavier .357 variety which will aid in recoil management, even if you only plan n shooting .38s or .38 +Ps. Especially, check out the new Taurus Polymer Protector. The Protector has a little more purchase than most snubbies (similar to Ruger Sixes), and yet it might also be the ticket for you. Check out a S&W model 19 as well. Quote Share this post Link to post Share on other sites
Socom 19 Posted February 7, 2012 Colt Single Action Army; Unbeatable. Quote Share this post Link to post Share on other sites
Smokin .50 1,907 Posted February 7, 2012 I have another 3 weeks before I can use my next P2P , so I have some time to shop I have very small hands . I'm 4'11 . I have shot my husband's S&W 686 ..the barrel is , I belive , 8 inches . I love the look of it , and I love the way the .357s slam out of it ..the problen is ergonomics. It is just too big for my hand. I have a very hard time reaching the trigger , and the pull is too hard in double action. Can't do it to save my life ( literally) . Now , I know the snub noses are super hard on the hands , not to mention less accurate , correct? So I'm not considering one . Basically looking for something that would fit a small hand ( or be easily modified to fit a small hand) ,ability to shoot .357 magnums , and maybe a lighter pull for double action ( that can be adjusted , yes?) . Are there many ( any) other women on the forum here ? Thanks! The PIZZA Man RULES! He & I are cut from the same bolt of cloth! A 4" Model 19 OR even a 4" Model 586 with thinner Houge or Pachmayer rubber grips are the two main guns for you to look at. Stay away from the snub-noses, for all of the reasons that Bob said! For a 6" tube, go with the smaller K-Frame Model 19 (or 66) w/ the same smaller rubber grips. They will fit your hands. They are easier to use in double action than either of the Rugers that have been suggested. Easier to work the speed-loaders too, and all of the Women that I've ever taught to shoot (including my Wife of almost 29 years) just LOVE the 4" mid-size S&W revolvers, including my Model 19 that I've had for going on 35 years! My Model 586 had an "action-job" done on it a couple decades ago. Ate everything I ever fed it without a burp! YOU WILL LOVE that Model 19! And more importantly, you'll be able to use it all day long cause it doesn't have the "droop" that your Husband's 8 3/8" revolver does. The more you shoot it (the "19"), the better you'll get. And if you want to do any competitions (steel, for instance) it will be well-balanced making for easier "transitions" between target arrays. Also easier on the draw out of a holster, especially off of a Woman's hip. So now you must run into the arms of that man that wants you to shoot his Model 19! LOL! Have a great night! Dave Quote Share this post Link to post Share on other sites
Sandy 44 Posted February 8, 2012 lol@ Dave and thanks every one ! I am leaning towards trying the mentioned S&Ws , probably 4" . A 4" should keep me from looking like the little western mouse on Tom And Jerry when I shoot Quote Share this post Link to post Share on other sites
Jon 264 Posted February 8, 2012 My tiny 4'11" wife has a Ruger Speed Six w/ 2 3/4" barrel and LOVES it. If you can get your hands on one, I recommend it. 1 Quote Share this post Link to post Share on other sites
Underdog 1,593 Posted February 8, 2012 My tiny 4'11" wife has a Ruger Speed Six w/ 2 3/4" barrel and LOVES it. If you can get your hands on one, I recommend it. I wish my wife was interested in one of these. I have one in 9mm and love it. Quote Share this post Link to post Share on other sites
Sandy 44 Posted February 8, 2012 My tiny 4'11" wife has a Ruger Speed Six w/ 2 3/4" barrel and LOVES it. If you can get your hands on one, I recommend it. I will put it on my "to try" list then. Thanks! Quote Share this post Link to post Share on other sites
diamondd817 827 Posted February 8, 2012 You mentioned your spouse has a 686. The S&W model 60 is exactly 2/3rds the size of the 686 and shoots 357 or 38. http://www.smith-wesson.com/webapp/wcs/stores/servlet/Product4_750001_750051_765498_-1_757768_757767_757751_ProductDisplayErrorView_Y Quote Share this post Link to post Share on other sites
irishpete 2 Posted February 8, 2012 As An FYI, I have a prelock S&W 686 6 inch in stainless steel. Its as accurate as all hell and I shoot it 95% of the time in DA at the range, Its much more accurate than my PX4, weighs a ton and I love it. I have'nt gotten around to putting it head to head with my new CZ SP-01 Quote Share this post Link to post Share on other sites
Sandy 44 Posted February 8, 2012 He told me it was an 8 inch. Men. Quote Share this post Link to post Share on other sites
GRIZ 3,369 Posted February 8, 2012 I'd forget the smaller frame revolvers (K framess, SP101, etc) some people are talking about. Along with the smaller grip they also weigh less which will give you more felt recoil. You could probably deal with it but I'd hate to buy for you another gun and find out it won't work for you. Try round butt K frame grips on your husband's 686. This usually worked for most women when I was a LE firerams instructor. The GP100 has the most potential as it doesn't have a grip frame like other guns. This makes it the easiest to make grips for as the grips only have to accomodate the mainspring housing which is a loty smaller than any grip frame. The GP100 also has the weight to absorb the recoil. As far as the trigger pull goes, yes it can be lightened but you might find yourself with light strikes on some types of ammo. More reliable is to build up your hand strength with a hand exerciser or tennis ball. It doesn't take much to accomplish this. Too many people look for light triggers as a crutch for their inability to develope basic marksmanship and conditioning skills. One of the best shooters in my office when I retired was a 4-10, 85# woman who could outshoot most be it with a revolver, Glock, or M16. Quote Share this post Link to post Share on other sites
Sandy 44 Posted February 8, 2012 Thanks ! Funny thing is my grip is incredibly strong. Been doing extensive martial arts since 2001. I can choke or flip a grown man using the collar of his Judo Gi . I lift a lot of free weights too . The problem is using my index finger alone. It either has nerve damage , rhuematoid arthritis , or something. I can't press on things (or type well )wth my index fingers. I can't pinch hard, if that makes sense . I can compete in submission grappling , but I can't button the buttons on my baby's shirt well. The triggers on my husband's PX4 , CZ 76 ( ?) , and my Colt .45 are managable . I'm hoping that better reach , and having more of my finger pad , on a revolver will allow me to pull double . Quote Share this post Link to post Share on other sites
RedBowTies88 41 Posted February 8, 2012 My girlfriend loves to shoot my model 36... the grip fits her hand perfectly. Does it absolutly have to be .357? I think a model 60 would serve you perfectly if not.. http://www.smith-wesson.com/webapp/wcs/stores/servlet/Product4_750001_750051_765498_-1_757768_757767_757751_ProductDisplayErrorView_Y Quote Share this post Link to post Share on other sites
Sandy 44 Posted February 8, 2012 Well , for familal economical bulk ammo purchasing , yes. I would like something that can shoot .38 specials and .357 magnums , same as Pete's 686 . . the model 60s I have been browsing are .357 ? Quote Share this post Link to post Share on other sites
RedBowTies88 41 Posted February 8, 2012 You're correct, I've started confusing my s&w models, my 36 is only made in .38 but the 60 is .357/.38 The j frame is a great gun, very small frame and feels very nice in the hand. If you have the oportunity to shoot one please do I think you'll like it. Most gun shops will have some form of j-frame in stock. probably a snub but the feel will still be the same grip wise. pick one up and hold it to see how it feels Quote Share this post Link to post Share on other sites
diamondd817 827 Posted February 8, 2012 You're correct, I've started confusing my s&w models, my 36 is only made in .38 but the 60 is .357/.38 The j frame is a great gun, very small frame and feels very nice in the hand. If you have the oportunity to shoot one please do I think you'll like it. Most gun shops will have some form of j-frame in stock. probably a snub but the feel will still be the same grip wise. pick one up and hold it to see how it feels Let me jump back in here and just say that the model 60 is a little different from the snub j frame. The model 60 has a full grip as opposed to a 2 finger grip of the snubbie and the frame is full steel as opposed to aluminium or titanium. Has a 3" barrel opposed to a 1 7/8. It is much heavier and will not kick like the j frame snubbie. It is much more comfortable to shoot. The frame and trigger reach is 2/3rds that of the 686. Quote Share this post Link to post Share on other sites