checko 180 Posted September 16, 2013 So what type of armor should I be looking at? Is soft armor good enough for a carrier like mine or is it designed to be used with a hard plate with soft armor backing specifically? I guess I'm looking at III or IIIa. Are there manufacturers I should be steering clear of? Quote Share this post Link to post Share on other sites
High Exposure 5,678 Posted September 16, 2013 It is designed to be used with hard armor - either stand alone (SA) plates or in-conjunction-with (ICW) plate with soft armor backers. DO NOT RUN ICW PLATES WITHOUT SOFT ARMOR BEHIND IT. I really like te MSA plates and the stuff Velocity Systems is putting out is pretty nice. Let me dig through some of my notes from our last BA procurement and I will post what I can. Quote Share this post Link to post Share on other sites
checko 180 Posted September 18, 2013 How are these? http://www.thetargetman.com/product/2-formed-ar500-omega-armor-formed-10x12-plate-set-rhino-lined-for-proven-frag-protection/ Quote Share this post Link to post Share on other sites
High Exposure 5,678 Posted September 18, 2013 I don't know. I wouldn't buy them and I wouldn't recommend them without doing a sh!t-ton of research first. The problem with armor is that there is a lot of "black magic" involved and armor salesmen are some of the scummiest people out there in my experience. Quote Share this post Link to post Share on other sites
blksheep 466 Posted September 18, 2013 I've seen the videos on youtube. Buy one and do some t&e. Quote Share this post Link to post Share on other sites
checko 180 Posted September 19, 2013 Whats everyone's opinion on fastmags? I got offered a couple earlier gen fastmags from a guy I know and figured I'd take them. I honestly dont know much about them other than they can be mounted upside down or vice versa. They seem to be pretty popular on some other sites I've visited but never heard much about them here. Quote Share this post Link to post Share on other sites
DirtyDigz 1,812 Posted September 20, 2013 Fastmags: Pros - very quick to draw/holster mags into, and hold the mags securely even upside down. Cons - They don't collapse when empty if you press them against something (like going prone if they're on the front), incorporate rubber straps in their design which may go brittle with time. Quote Share this post Link to post Share on other sites
DirtyDigz 1,812 Posted September 20, 2013 How are these? http://www.thetargetman.com/product/2-formed-ar500-omega-armor-formed-10x12-plate-set-rhino-lined-for-proven-frag-protection/ Here's a youtube vid of "Corey pimps Erika" taking some shots at that armor: http://www.youtube.com/watch?v=yq3o806iMmw Quote Share this post Link to post Share on other sites
SgtToadette 59 Posted September 20, 2013 I was considering ordering some FastMags just to play with them. I'd consider throwing them on a belt system mostly, but might throw them on a rig for funsies. Quote Share this post Link to post Share on other sites
checko 180 Posted September 20, 2013 After reading up on these it seems like he was wrong. I have gen III's I think. Quote Share this post Link to post Share on other sites
High Exposure 5,678 Posted September 20, 2013 Yeah, that's a Gen III. Move that rubber band into one of those grooves so it doesn't get cut. They work OK. Not my favorite. They make for a good emergency reload pouch on the belt. They suck for chest mounting for the reason DD stated. Quote Share this post Link to post Share on other sites
checko 180 Posted September 20, 2013 Yeah, that's a Gen III. Move that rubber band into one of those grooves so it doesn't get cut. They work OK. Not my favorite. They make for a good emergency reload pouch on the belt. They suck for chest mounting for the reason DD stated. I can still malice clip my magna mag pistol holders to it right? Quote Share this post Link to post Share on other sites
High Exposure 5,678 Posted September 20, 2013 Yup. Just move the band after you thread the malice clips. Quote Share this post Link to post Share on other sites
checko 180 Posted September 20, 2013 I was messing around with them when I got home from work trying to find a spot for them. I don't think these will work on the belt, they have specific ones for that. I put them upside down on my AC to see how they feel. Meh. I don't know if I'll keep them. Maybe I'll mount them on the back of my AC for buddy reload or something lol. Quote Share this post Link to post Share on other sites
High Exposure 5,678 Posted September 20, 2013 That model can work on your belt with some finagling. I have seen both upside down and back/quiver carry in real world use. They both have merit in certain situations. I don't see them Being applicable to anything I will ever do, but if it works for you go for it. Quote Share this post Link to post Share on other sites
checko 180 Posted September 20, 2013 I doubt it will. Just trying to rationalize a impulse buy lol. I can always sell them for what I paid. I'll give it another go when I'm not so tired. Quote Share this post Link to post Share on other sites
A-Tech 8 Posted October 1, 2013 I love Erika. Dream girl Quote Share this post Link to post Share on other sites
Blake 50 Posted October 1, 2013 I guess steel plates have made serious advances recently bc i had ways read they were heavier and had spall issues. That video seems to show the opposite. Interesting to say the least. Quote Share this post Link to post Share on other sites
High Exposure 5,678 Posted October 1, 2013 I love Erika. Dream girl Except for one small fault I agree - She's obviously attracted to douche bags. On second thought, maybe I would have a chance after all… Quote Share this post Link to post Share on other sites
checko 180 Posted October 1, 2013 She's meh. Yes please. Quote Share this post Link to post Share on other sites
Holeshot 3 Posted October 1, 2013 I prefer her chest rig. Quote Share this post Link to post Share on other sites
High Exposure 5,678 Posted October 1, 2013 You are correct. No one compares to Jesse. Quote Share this post Link to post Share on other sites
njpilot 671 Posted October 1, 2013 You are correct. No one compares to Jesse. +1000 Anyone see her on Sean Hannity a couple of months ago. Shooting different rifles at an indoor range? Hot, hot, hot. Quote Share this post Link to post Share on other sites
Vlad G 345 Posted October 1, 2013 I guess steel plates have made serious advances recently bc i had ways read they were heavier and had spall issues. That video seems to show the opposite. Interesting to say the least. Well I'm not sure why that is surprising. They say it is 1/4 inch thick AR500. Consider that the best targets out there are made of 3/8 AR500 and will take thousands of hits from .223, and that is with only 50% more thickness. Add some bed liner and you are going to have a rather solid bit protection, seeing that if you need it to last long as MGM steel you got a problem Quote Share this post Link to post Share on other sites
SgtToadette 59 Posted October 12, 2013 Just got in my Mayflower pouches I had on backorder. Decided to have some fun and throw some stuff on my RackMINUS rig and see how I like it. Here's a mish-mosh of pouches I threw together really quickly, along with a picture of the thickness. Quote Share this post Link to post Share on other sites
checko 180 Posted October 12, 2013 Just got in my Mayflower pouches I had on backorder. Decided to have some fun and throw some stuff on my RackMINUS rig and see how I like it. Here's a mish-mosh of pouches I threw together really quickly, along with a picture of the thickness. Looks really good dude. Is this the config youre thinking of trying out with? If I may make a suggestion: I would move the pistol mags anywhere other than the middle there, they would probably be very uncomfortable prone. You can use that spot for a single tq now strap. Do you have a belt? Eta I seen you said its kind of thrown together. I like that its very thin. Does it hold tight to the chest well? Quote Share this post Link to post Share on other sites
SgtToadette 59 Posted October 12, 2013 Looks really good dude. Is this the config youre thinking of trying out with? If I may make a suggestion: I would move the pistol mags anywhere other than the middle there, they would probably be very uncomfortable prone. You can use that spot for a single tq now strap. Do you have a belt? Eta I seen you said its kind of thrown together. I like that its very thin. Does it hold tight to the chest well? I wasn't planning on sticking with this configuration. I threw it together more for the purpose of seeing how I like the attachment interface. I'll surely be moving pouches around when I have a more complete understanding of what I'm keeping on the rig and what I'm moving to a belt system. I'll be grabbing a belt system sometime in the future, on which I plan to have some extra mags, a med-kit, a dump pouch, a GP pouch, and my pistol. The rig is pretty tight to the chest, but I haven't fully adjusted the straps yet. I'll definitely be moving the pistol mag pouch to my weak side on the rig. I will also move the flashlight to the belt system to cut down on bulk, too. I'm also at the point of trying to figure out what kind of administrative items I'll need to add the entire setup. The process is fun in and of itself, so I'm looking forward to the trial and error nature of finding what works best for me. Quote Share this post Link to post Share on other sites
MedicYeti 96 Posted October 25, 2013 Is VooDoo Tactical any good? Quote Share this post Link to post Share on other sites
High Exposure 5,678 Posted October 25, 2013 In my experience, no. Voodoo is cheap Chinese knockoffs of quality gear. Condor is in the same category. Quote Share this post Link to post Share on other sites