diamondd817 827 Posted February 1, 2018 I would like to get my hands on a new KT Sub2000 in 9mm. I think I already know the answer, but just want to confirm. The stock has to pinned to be NJ compliant, correct? And that's it, right? Quote Share this post Link to post Share on other sites
DeletePLS 178 Posted February 1, 2018 no it doesnt need to be pinned Quote Share this post Link to post Share on other sites
124gr9mm 859 Posted February 1, 2018 47 minutes ago, diamondd817 said: I would to get my hands on a new KT Sub2000 in 9mm. I think I already know the answer, but just want to confirm. The stock has to pinned to be NJ compliant, correct? And that's it, right? The only pinning that needs to be done is to the nut on the barrel that covers the threads. The shop where I bought mine had them pinned before they put them out on display, so it will probably be ready when you see it. While the stock has 3 positions you can adjust to, it's not something you can do on the fly. You have to remove a pin (under pressure) and adjust the entire stock, so it' not a quick adjustment. Otherwise they're good to go...for now!!! Quote Share this post Link to post Share on other sites
Ray Ray 3,566 Posted February 1, 2018 @diamondd817, buy the Ruger PCC 9mm. Your welcome Quote Share this post Link to post Share on other sites
Old Glock guy 1,127 Posted February 1, 2018 17 minutes ago, 124gr9mm said: The only pinning that needs to be done is to the nut on the barrel that covers the threads. The shop where I bought mine had them pinned before they put them out on display, so it will probably be ready when you see it. While the stock has 3 positions you can adjust to, it's not something you can do on the fly. You have to remove a pin (under pressure) and adjust the entire stock, so it' not a quick adjustment. Otherwise they're good to go...for now!!! Yes, that is accurate advice. As you are probably aware, there are multiple configurations in 9mm, depending on which mags you want to use. Be sure to get a Gen.2. I would be interested to hear from you after you've shot it a few times. I find it extremely difficult to shoot using the iron sights, as I need to contort my head to look through the rear peep sight, and I end up bruising my cheek on the metal stock. OTOH, with a red dot optic, it is a pleasure to shoot. Quote Share this post Link to post Share on other sites
diamondd817 827 Posted February 1, 2018 Ok, where can I get one NJ? I want a Gen 2 with Glock 19 mags. Black. Quote Share this post Link to post Share on other sites
Ray Ray 3,566 Posted February 1, 2018 8 minutes ago, diamondd817 said: Ok, where can I get one NJ? I want a Gen 2 with Glock 19 mags. Black. I had this model, and your pinky finger hangs off the bottom of the gun. It also was unreliable. The Ruger is a better buy. Quote Share this post Link to post Share on other sites
124gr9mm 859 Posted February 1, 2018 12 minutes ago, diamondd817 said: Ok, where can I get one NJ? I want a Gen 2 with Glock 19 mags. Black. While not as rare as they used to be, they're still pretty sparse at most gun shops. The Glock 19 is the rarest, so if you want one now your best bet is to get the G17 model (most available) and order the G19 grips from KelTec or cut down the G17 grips. I've never held the G19 model (mine is a G17) but from what I hear the grip is very small (obviously) so definitely feel before you buy. Ottomanelli's usually has one or two on the shelf if you want to hold one and see what it feels like, but they charge a LOT for them. If you want one soon then you may want to check the online sites and buy that way. Quote Share this post Link to post Share on other sites
124gr9mm 859 Posted February 1, 2018 22 minutes ago, Old Glock guy said: Yes, that is accurate advice. As you are probably aware, there are multiple configurations in 9mm, depending on which mags you want to use. Be sure to get a Gen.2. I would be interested to hear from you after you've shot it a few times. I find it extremely difficult to shoot using the iron sights, as I need to contort my head to look through the rear peep sight, and I end up bruising my cheek on the metal stock. OTOH, with a red dot optic, it is a pleasure to shoot. Yes, cheek position was a challenge for me too. For me the best place to hold was with my cheek as far forward as possible (right next to the barrel nut). Sometimes my cheekbone slips to the top a little and recoil will punch me a bit, but the more I use it the less I get of that. If I break down and buy the tube cover I'll let you know how it works out: https://www.amazon.com/Tacticool-Products-Cover-Kel-Tec-SUB-2000/dp/B01IQHWLT6 Quote Share this post Link to post Share on other sites
AlexTheSane 236 Posted February 1, 2018 https://gun.deals/search/apachesolr_search/640832004816?upc_only=1&is_firearms_wikiarms=0 Quote Share this post Link to post Share on other sites
JT Custom Guns 957 Posted February 2, 2018 5 hours ago, diamondd817 said: Ok, where can I get one NJ? I want a Gen 2 with Glock 19 mags. Black. We sell the NJ Compliant Gen II Sub 2000's Call me! JT 2 Quote Share this post Link to post Share on other sites
Oakridgefirearms 224 Posted February 2, 2018 6 hours ago, diamondd817 said: Ok, where can I get one NJ? I want a Gen 2 with Glock 19 mags. Black. I have a black 9mm Gen 2 that takes S&W M&P mags and a Tan 9mm Gen 2 that takes Beretta 92 mags in stock. The Glock versions don't last long when I get them in stock. Quote Share this post Link to post Share on other sites
1LtCAP 4,263 Posted February 2, 2018 6 hours ago, diamondd817 said: Ok, where can I get one NJ? I want a Gen 2 with Glock 19 mags. Black. . 6 hours ago, Ray Ray said: I had this model, and your pinky finger hangs off the bottom of the gun. It also was unreliable. The Ruger is a better buy. i've yet to have any sort of malfunction on mine. Quote Share this post Link to post Share on other sites
Ray Ray 3,566 Posted February 2, 2018 8 minutes ago, 1LtCAP said: i've yet to have any sort of malfunction on mine. Welcome to the world of Kel-Tec, half the gun culture hates them because their junk and the other half loves their value and enginuitty. 1 Quote Share this post Link to post Share on other sites
DeletePLS 178 Posted February 2, 2018 i've had some malfunctions outta my gen1 glock 17 model switching to heavier bullets seemed to resolve the issues. i agree keltec is hit or miss but they also make guns that no other company is making. Quote Share this post Link to post Share on other sites
Ray Ray 3,566 Posted February 2, 2018 8 hours ago, cabalrayz said: i've had some malfunctions outta my gen1 glock 17 model switching to heavier bullets seemed to resolve the issues. i agree keltec is hit or miss but they also make guns that no other company is making. Ruger answered the bell with a better 9mm take down rifle. Better construction, options, parts and a company that puts out a product you can actually put your hands on. Quote Share this post Link to post Share on other sites
diamondd817 827 Posted February 2, 2018 15 hours ago, Ray Ray said: I had this model, and your pinky finger hangs off the bottom of the gun. It also was unreliable. The Ruger is a better buy. If it uses the 19 mags, how much smaller can the grip be then the G19 grip? Also, going to be a range toy only. 16 hours ago, Ray Ray said: @diamondd817, buy the Ruger PCC 9mm. Your welcome I just like the look of the Kel Tec better. Quote Share this post Link to post Share on other sites
diamondd817 827 Posted February 2, 2018 15 hours ago, 124gr9mm said: While not as rare as they used to be, they're still pretty sparse at most gun shops. The Glock 19 is the rarest, so if you want one now your best bet is to get the G17 model (most available) and order the G19 grips from KelTec or cut down the G17 grips. I've never held the G19 model (mine is a G17) but from what I hear the grip is very small (obviously) so definitely feel before you buy. Ottomanelli's usually has one or two on the shelf if you want to hold one and see what it feels like, but they charge a LOT for them. If you want one soon then you may want to check the online sites and buy that way. So the only difference between the 17 and 19 model is the grip, which can be switched out easily? Quote Share this post Link to post Share on other sites
diamondd817 827 Posted February 2, 2018 16 hours ago, Old Glock guy said: Yes, that is accurate advice. As you are probably aware, there are multiple configurations in 9mm, depending on which mags you want to use. Be sure to get a Gen.2. I would be interested to hear from you after you've shot it a few times. I find it extremely difficult to shoot using the iron sights, as I need to contort my head to look through the rear peep sight, and I end up bruising my cheek on the metal stock. OTOH, with a red dot optic, it is a pleasure to shoot. Will do. Quote Share this post Link to post Share on other sites
1LtCAP 4,263 Posted February 2, 2018 9 hours ago, Ray Ray said: Welcome to the world of Kel-Tec, half the gun culture hates them because their junk and the other half loves their value and enginuitty. ha! mine serves one purpose since i've verified it with the different brands of ammo....... Quote Share this post Link to post Share on other sites
124gr9mm 859 Posted February 2, 2018 35 minutes ago, diamondd817 said: So the only difference between the 17 and 19 model is the grip, which can be switched out easily? Yes, the only difference in the 9mm lock versions (probably all 9mm versions) is with the grips. I guess "easy" depends on how comfortable you are with taking things apart and putting them back together. At a basic level you're just taking the screws out and replacing the panels, but in order to do so you have to take apart the whole gun. I replaced the trigger and springs myself, so it's definitely something you can do on your own...IF you're comfortable with that kind of thing. Just remember that there are a bunch of tiny springs that want to jump out and fly everywhere, so you have to watch out for that. This video shows the disassemble/reassemble process (and trigger replacement which I HIGHLY recommend) so use that as your guide: Quote Share this post Link to post Share on other sites
AlexTheSane 236 Posted February 2, 2018 1 hour ago, diamondd817 said: So the only difference between the 17 and 19 model is the grip, which can be switched out easily? You can even take a hacksaw to the grip to shorten it to fit the 19 Quote Share this post Link to post Share on other sites
AlexTheSane 236 Posted February 2, 2018 17 hours ago, Ray Ray said: I had this model, and your pinky finger hangs off the bottom of the gun. It also was unreliable. The Ruger is a better buy. My Gen1 Sub2k is a .40. Seems like I have fewer problems with it than the 9mm owners. Quote Share this post Link to post Share on other sites
124gr9mm 859 Posted February 2, 2018 2 hours ago, AlexTheSane said: You can even take a hacksaw to the grip to shorten it to fit the 19 Absolutely! I've seen pictures of lots of different Sub 2000 mods, so I think it all depends on your comfort/skill level. Quote Share this post Link to post Share on other sites
Ray Ray 3,566 Posted February 2, 2018 5 hours ago, diamondd817 said: If it uses the 19 mags, how much smaller can the grip be then the G19 grip? Also, going to be a range toy only. I just like the look of the Kel Tec better. It's engineering. The grip was cut to accept Glock 19 magazines so you lose the spot where your pinky rests. Drove me nuts. If it was reliable then I might have accepted it. But the rifle is cheaply made, unreliable and doesn't inspire trust. The Ruger PCC is the complete opposite. 1 Quote Share this post Link to post Share on other sites
PK90 3,570 Posted February 2, 2018 37 minutes ago, Ray Ray said: ... The Ruger PCC is the complete opposite. And heavy 1 Quote Share this post Link to post Share on other sites
DeletePLS 178 Posted February 2, 2018 only took ruger 18 years and they come with an answer that looks like a hipoint. has anyone bought or shot one yet or is this all just shotshow hype as usual? Quote Share this post Link to post Share on other sites
Ray Ray 3,566 Posted February 2, 2018 2 hours ago, PK90 said: And heavy Lift weights 3 Quote Share this post Link to post Share on other sites
gfl216 226 Posted February 7, 2018 On 2/1/2018 at 0:53 PM, diamondd817 said: Ok, where can I get one NJ? I want a Gen 2 with Glock 19 mags. Black. If you are still looking, I saw one on the NJ page of Armslist. Quote Share this post Link to post Share on other sites
diamondd817 827 Posted February 7, 2018 6 hours ago, gfl216 said: If you are still looking, I saw one on the NJ page of Armslist. I saw that. I can get one new for less than what he wants. I don't have to have the nickel finish. Quote Share this post Link to post Share on other sites