Jump to content
Matt

"Wild west" rifles

Recommended Posts

I have always had an interest in "wild west" weaponry but have never bought anything from that era (not antique I just mean a recreation). If you were going to buy only one late 1800s era weapon (modern version) that most closely resembles the rifles of that time period what would it be and what caliber would you get it in? Henry? Winchester? info appreciated.

Share this post


Link to post
Share on other sites

I have always had an interest in "wild west" weaponry but have never bought anything from that era (not antique I just mean a recreation). If you were going to buy only one late 1800s era weapon (modern version) that most closely resembles the rifles of that time period what would it be and what caliber would you get it in? Henry? Winchester? info appreciated.

 

Marlin 1894 and 1895 are great guns. I like that they are fed on the receiver and have side eject (in case you want a scope). The Henry looks nice and is US Made, but is chock full of MIM parts. Some folks are OK with that though.

Share this post


Link to post
Share on other sites

I bought a Savage M99 off the board here and couldn't be happier at fulfilling my lever action wants. I wouldn't hesitate at getting a Henry Big Boy, and I still may one of these days.

Good lever actions (Marlin's, Winchester's (pre & post '64's) & Savage's) aren't cheap anymore. Savage 1899's are pretty cool. They take the tubular-fed lever action to the next ballistic level. And who could forget Charles Bonson carrying his '99 in the movie Death Hunt?

 

DeathHunt.jpg

 

Share this post


Link to post
Share on other sites

I have always had an interest in "wild west" weaponry but have never bought anything from that era (not antique I just mean a recreation). If you were going to buy only one late 1800s era weapon (modern version) that most closely resembles the rifles of that time period what would it be and what caliber would you get it in? Henry? Winchester? info appreciated.

 

I have a Winchester 94 Trapper in 357. This is the angle eject model. Its a great , reliable rifle and fun to shoot. Also you can keep your expenses down by shooting 38 specials. If you reload, you can make light target loads using 357 cases. Of course after that you have to get a six gun and then a double barrel coach gun. Then you are all set..

Share this post


Link to post
Share on other sites

Good lever actions (Marlin's, Winchester's (pre & post '64's) & Savage's) aren't cheap anymore. Savage 1899's are pretty cool. They take the tubular-fed lever action to the next ballistic level. And who could forget Charles Bonson carrying his '99 in the movie Death Hunt?

 

DeathHunt.jpg

 

Yeah, mine has those features plus an indicator pin that pops up when it's cocked, similar to the pin on my XD. A nicety when there's no hammer to see.

Share this post


Link to post
Share on other sites
how about a repro rolling block in 45 70

like this. i call it the Quigley down under gun

 

S.874.jpg

 

 

Come on Ted, Quigley didn't use a rolling block, he used an 1874 Sharps, more like this...

 

ublongrangesharps.jpg

 

Although, if I remember correctly his had a patch box in the butt and a full octagon barrel.

 

Adios,

 

Pizza Bob

Share this post


Link to post
Share on other sites

Eventually I would like to get a Winchester 1866 "Yellow Boy" .44 Just because I'm a huge Clint Eastwood fan, and seeing it in "The Good, The Bad and The Ugly" Always thought it was cool...

 

That was the 1860 model. Way cool though. I might get one in 44.40!

Share this post


Link to post
Share on other sites

I have always had an interest in "wild west" weaponry but have never bought anything from that era (not antique I just mean a recreation). If you were going to buy only one late 1800s era weapon (modern version) that most closely resembles the rifles of that time period what would it be and what caliber would you get it in? Henry? Winchester? info appreciated.

 

I've heard good things about Marlins, but also been told to stay away from recently made ones due to poor fitting parts.

 

Puma or Hartford, is handling the Winchester 1892 clones through EMF Firearms (http://www.emf-company.com/), but Chiappa has a take down Model 1892 clone. Typical calibers are .38spl/.357mag and .45colt. .44special/.44mag is out there, but not as prevalent.

 

I have a Puma 1892 .38spl/.357mag I use every now and then to air out the barrel. It's a good rifle, but is picky on .38spl ammo. Some of it is too fat to fit through the guide rails!

 

Uberti (imported by Taylors Firearms in Virgina, and Cimmaron Firearms in TX [sTAY AWAY FROM ANY OTHER MAKER]) makes the clones of the 1860, 1866, 1873, and 1876. All come in calibers such as .38spl/.357, .44special, .44-40, and .45colt (the 1876 comes in obscure calibers and getting raw materials to roll your own can be difficult). They're nice guns, but I'm hesitant to purchase one without having a gunsmith go over it, making sure it works and the parts are fit properly.

 

There is also the 1886 in 45.70, Browning a run of them a number of years ago (made in Japan I think), and they can be found on gunbroker for around $1500 or so, which is the same price as a current Chiappa model.

 

If your interested in the Winchester 1894, you can find boatloads of them at any gun show in PA for anywhere between $300 to $500. At some point there was a run of these in .38spl/.357mag, and .45colt. Originals come in .30-.30

 

Sometimes you can find originals from back in the day for really good prices, but the problem is parts.

Share this post


Link to post
Share on other sites

I am partial to Winchesters, but not the price they go for. After a lot of reading I went with the Rossi R92. It is a clone of the Winchester 92. I love the lines and feel of the gun. I picked up a 357 Cowboy and a 45 Colt Cowboy models ata good price from Tony ( TJ Sporting Arms ). Next on the wish list is a Sharps 45/70 or a Remington Rolling block.

Share this post


Link to post
Share on other sites

Come on Ted, Quigley didn't use a rolling block, he used an 1874 Sharps, more like this...

 

ublongrangesharps.jpg

 

Although, if I remember correctly his had a patch box in the butt and a full octagon barrel.

 

Adios,

 

Pizza Bob

 

 

hey its my gun and i will name it as i please :icon_lol::icon_lol::icon_lol:

its the Quigley gun to me,, if i called it the Tom Selleck gun that would be gay :rolleyes::rolleyes:

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.



  • olight.jpg

    Use Promo Code "NJGF10" for 10% Off Regular Items

  • Supporting Vendors

  • Latest Topics

  • Posts

    • We never let then inside.  Last re-evaluation was 6-7 years ago, wife politely told him that he was welcome to look around the property and he could look in the windows. He saw two white resin chairs in the basement and told her that this constituted a finished basement. And everything in the basement is bare concrete/ cinder block, and mechanical systems. Nothing finished about it. Ultimately he relented and I'm sure that was a ploy to coerce us to allow him in
    • I use an Alien Gear cloak tuck (IWB) with my Shield.  Neoprene back - in the summer it does feel warm but doesn't rub or chafe.   https://aliengearholsters.com/ruger-lcp-iwb-holster.html Could also go with the shapeshift as it has multiple options - OWB/IWB, Appendix... https://aliengearholsters.com/ruger-lcp-shapeshift-modular-holster-system.html
    • The  12-1 compression ratio L88 is long gone. This is GM's updated version. it might be  pump gas 10-1 engine The L88 was a aluminum head  cast iron block engine with a nasty solid lifter cam. the  ZL1 was a all aluminum  12 or 13-1 compression ratio engine with the best forged internal parts at the time and had a even nastier solid lifter cam 
    • I like my regular carry holster.  OWB leather with belt slots.  I've been carrying for over a year and it was comfortable and I hardly even noticed it.  I carry (usually) a Ruger LCP .380 - light, convenient, tiny. But...today I ended up taking it off an leaving it home after a few hours. I cut down a big maple tree a few days ago and I spent 3/4 of today loading and unloading firewood into the back of my truck and a trailer.  It was a warm day, I was dirty, tired, sweaty, and my holster was rubbing against my side.  The leather and exposed metal snap was no longer comfortable. I'm thinking about adding a layer of something to that part of the holster to soften the contact.  Anything insulating will make it worse.  I don't want a sweaty, hotter holster against my skin.  I'm imagining something thin, breathable, that won't absorb sweat, and softer than leather, metal snaps, and rivets.   But I have no idea what would work. I'm hoping somebody else has already figured this out and I can just do what they did. Any suggestions appreciated.
    • Check the primers on the ammo you didn't shoot yet. Are they fully seated? If the primer is not just below flush with the back of the case, the first hit can seat it better then the second hit ignites it. 
×
×
  • Create New...