Jump to content
ah141nj

Need landscaping help

Recommended Posts

How does that tree get water? It's in a pretty tiny plot in the middle of a whole lot of pavement and concrete.

 

Like I said, I don't know anything about trees. It caught my eye because I look for this type of stuff. My work often involves hydrology and also overburden hydrogeology. And I always note pavement and cover. It looks like the live tree might get water from the unpaved slope next to it.

Share this post


Link to post
Share on other sites

Arborvitae are usually pretty hard to kill. I agree with the ice melt theory. I would remove the tree though. They are in a bad place. Anywhere near black top is hard to keep them from drying out.

Share this post


Link to post
Share on other sites

AS the others have said, it's dead, pull it and if you want to put another one there I'd say if you have a sprinkler system put a drip head there. Also if it caught something or the soil was contaminated I'd say dig out a good amount of soil and put some new good stuff there.

 

Harry

Share this post


Link to post
Share on other sites

That thing is mulch!!! I'd say salt got it from a snowblower.Another thing that attacks these are mites. You should spray it every spring and fall with Ortho® MAX® Malathion Insect Spray Concentrate.But to tell you the truth I would just pave over that spot as it requires special care to grow a plant there.

Share this post


Link to post
Share on other sites

I think that might be a variety of False Cypress (Hinoki?), would need a close up pic to be sure. Either way it's dead, needled evergreens will not recover from that level of browning. I'm a little surprised it lasted that long confined in such a small planter. Large plants don't usually fair well in such tight space, not enough water and too much soil compaction around it. Also get rid of the white stone under your evergreens, this is a type of limestone that will sweeten the soil, evergreens need acidic soil.

Share this post


Link to post
Share on other sites

Lets see-

*poor location to receive any rain water

*poor location to receive any nourishment from the natural soil for healthy root growth

*gets roasted in the summer from the heat reflection off blacktop and house

*exposure to winter salts/chemicals and any toxic minerals from the stone

I think its time to quit, get a nice planter with some ivy/flora that can be easily watered from the hose or a can. Not sure how it even grew there, must hae been planted as a mature speciman?

Share this post


Link to post
Share on other sites

Those 2 trees have been there for 7+ years that I am aware of. They came with the house.

 

Watering them never seemed to be a problem since we have been here.

 

I did get a lot of snow this winter, did a lot of snow blowing. Perhaps it is possible that calcium chloride got in on the base. I never use salt. Could calcium chloride be the problem?

 

Anything possible to reverse the browning? Before I cut it down, I would like to try what I can.

Share this post


Link to post
Share on other sites

Anything possible to reverse the browning? Before I cut it down, I would like to try what I can.

 

Short of calling up Jesus to do a "raise Lazarus from the dead" thing - no, you will not be able to "reverse the browning".

 

It's a zombie man - just shoot it in the head and move on.

Share this post


Link to post
Share on other sites

Those 2 trees have been there for 7+ years that I am aware of. They came with the house.

 

Watering them never seemed to be a problem since we have been here.

 

I did get a lot of snow this winter, did a lot of snow blowing. Perhaps it is possible that calcium chloride got in on the base. I never use salt. Could calcium chloride be the problem?

 

Anything possible to reverse the browning? Before I cut it down, I would like to try what I can.

It's dead, there's no saving it now. Calcium Chloride is no better for your plants then Sodium Chloride (salt) since it's the Chloride part that adversely affects plants.

 

Plants die for a variety of reasons, this plant would have been under a lot of stress due to it's location and it would not have taken too much else to kill it off. I'm surprised it lasted as long as it did. We also had a brutal winter, always a lot of fatalities in the plant world after a bad winter.

Share this post


Link to post
Share on other sites

I guess you guys haven't noticed, but there are a lot of Arborvitae and Spruce trees around that have recently died! I just lost 3 Arborvitae that were about 40 yrs old and a 60' Spruce that was 38 yrs. old. My neighbor just lost 2 Spruce trees. I think it had something to do with the drought we had last Summer (?).

Share this post


Link to post
Share on other sites

I guess you guys haven't noticed, but there are a lot of Arborvitae and Spruce trees around that have recently died! I just lost 3 Arborvitae that were about 40 yrs old and a 60' Spruce that was 38 yrs. old. My neighbor just lost 2 Spruce trees. I think it had something to do with the drought we had last Summer (?).

Not really there are a few lawsuits going against dow at the moment for a chemical called Imprelis that is thought to have killed many spruce trees by accident.Want to learn more read here.

http://www.lawnsite.com/showthread.php?t=353005

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.



  • olight.jpg

    Use Promo Code "NJGF10" for 10% Off Regular Items

  • Supporting Vendors

  • Latest Topics

  • Posts

    • I use an Alien Gear cloak tuck (IWB) with my Shield.  Neoprene back - in the summer it does feel warm but doesn't rub or chafe.   https://aliengearholsters.com/ruger-lcp-iwb-holster.html Could also go with the shapeshift as it has multiple options - OWB/IWB, Appendix... https://aliengearholsters.com/ruger-lcp-shapeshift-modular-holster-system.html
    • The  12-1 compression ratio L88 is long gone. This is GM's updated version. it might be  pump gas 10-1 engine The L88 was a aluminum head  cast iron block engine with a nasty solid lifter cam. the  ZL1 was a all aluminum  12 or 13-1 compression ratio engine with the best forged internal parts at the time and had a even nastier solid lifter cam 
    • I like my regular carry holster.  OWB leather with belt slots.  I've been carrying for over a year and it was comfortable and I hardly even noticed it.  I carry (usually) a Ruger LCP .380 - light, convenient, tiny. But...today I ended up taking it off an leaving it home after a few hours. I cut down a big maple tree a few days ago and I spent 3/4 of today loading and unloading firewood into the back of my truck and a trailer.  It was a warm day, I was dirty, tired, sweaty, and my holster was rubbing against my side.  The leather and exposed metal snap was no longer comfortable. I'm thinking about adding a layer of something to that part of the holster to soften the contact.  Anything insulating will make it worse.  I don't want a sweaty, hotter holster against my skin.  I'm imagining something thin, breathable, that won't absorb sweat, and softer than leather, metal snaps, and rivets.   But I have no idea what would work. I'm hoping somebody else has already figured this out and I can just do what they did. Any suggestions appreciated.
    • Check the primers on the ammo you didn't shoot yet. Are they fully seated? If the primer is not just below flush with the back of the case, the first hit can seat it better then the second hit ignites it. 
    • And, charging your car at home? We've got you covered! California braces for new electric plan: Make more, pay more | Fox Business
×
×
  • Create New...