njJoniGuy 2,133 Posted January 26, 2013 So, you are reusing your primers, bullets and powder, too? Every reloader among us should be saving his spent primers. A "chemist" at some future date will be reloading them. They don't take up very much space (ziplok freezer bags) and are easy to keep sorted by size and type. Don't be surprised when that fat lez who occupies DHS declares primers to be explosive devices that require Federal Explosive licenses to possess. Quote Share this post Link to post Share on other sites
Melgamatic 66 Posted January 26, 2013 Can you get reasonably priced reloading components now? I thought panic buying raises all boats equally? There appears to not be the reloading component problems we had during the last rush. Still tons of primers and powder sitting around on shelves at normal prices with no limits. Some high quality projectiles are a little scarce (e.g., Sierra #2200 308 168gr HPBT MatchKing), but tons of others are available (and actually, just got a few thousand of those projectiles delivered today. I think primer companies (CCI, Federal, etc) have been ramping up production for the past 4 years. Quote Share this post Link to post Share on other sites
Njbanshee 9 Posted January 26, 2013 Finally, some people who get it Quote Share this post Link to post Share on other sites
hd2000fxdl 422 Posted January 26, 2013 Every reloader among us should be saving his spent primers. A "chemist" at some future date will be reloading them. They don't take up very much space (ziplok freezer bags) and are easy to keep sorted by size and type. Don't be surprised when that fat lez who occupies DHS declares primers to be explosive devices that require Federal Explosive licenses to possess. Never thought about it but what material are primers made of. Sent from my iPad using Tapatalk Quote Share this post Link to post Share on other sites
rightisright 3 Posted January 26, 2013 Well, at least a few guys understood the original questions... Quote Share this post Link to post Share on other sites
njJoniGuy 2,133 Posted January 26, 2013 The cups and anvils are brass. Tumble them clean and separate the anvils from the crud. Easy to flatten out the firing pin dent with a punch. Put a drop of liquid priming compound in the cup, set an anvil in and let it all dry. Voila! Live primers again Quote Share this post Link to post Share on other sites
hd2000fxdl 422 Posted January 26, 2013 I like reloading but making another hobby in a hobby in a hobby is a little more than I want. Was thinking there're brass but wasn't sure. Ill probably just add them the my brass scrap buckets and bring them in for cash with the rest of it. They do weigh a little bit when you have a bunch, think I probably have about 15k of them saved. I know not that many as some of you but I only started reloading a year and a half ago. Sent from my iPad using Tapatalk Quote Share this post Link to post Share on other sites
njJoniGuy 2,133 Posted January 26, 2013 Don't scrap them. Leave them for those who will recharge them when it becomes necessary. Quote Share this post Link to post Share on other sites
hd2000fxdl 422 Posted January 26, 2013 Don't scrap them.Leave them for those who will recharge them when it becomes necessary. ok I'll save them for the second batch that ill cash in and see if there is a market for them between now and then. Sent from my iPad using Tapatalk Quote Share this post Link to post Share on other sites
usnmars 136 Posted January 26, 2013 strike anywhere matches work well. Quote Share this post Link to post Share on other sites
tony357 386 Posted January 26, 2013 The only reason that I'm not reloading my own ammo is because its not my own house. I know a couple people that are on the same boat. It might not sound like a good enough reason, but obviously I'm not the only one that feels that way. That is an excuse not a reason.. Quote Share this post Link to post Share on other sites
hd2000fxdl 422 Posted January 26, 2013 Data....please! Nick, they are the old wooden matches (special head compound ones) we use to use all the time years back, they were easily found then, I don't see them at all these days, but I'd bet a Army/Navy store or similar would have them. We use to use them as a backup to our Zippo's when they ran out of fuel, could light your cig with one hand by flicking your thumb nail on the head. Quote Share this post Link to post Share on other sites
Njbanshee 9 Posted January 26, 2013 Well, at least a few guys understood the original questions... If saving money or making quality ammo isn't good enough then it's just a good skill set to have. Like hunting fishing or welding, it's a skill. Quote Share this post Link to post Share on other sites
raz-0 1,263 Posted January 26, 2013 Data....please! It doesn't work well for small pistol cartridges, and probably not at all for rifle. Some people have posted their attempts on YouTube. Quote Share this post Link to post Share on other sites
KpdPipes 388 Posted January 27, 2013 There appears to not be the reloading component problems we had during the last rush. Still tons of primers and powder sitting around on shelves at normal prices with no limits. Some high quality projectiles are a little scarce (e.g., Sierra #2200 308 168gr HPBT MatchKing), but tons of others are available (and actually, just got a few thousand of those projectiles delivered today. I think primer companies (CCI, Federal, etc) have been ramping up production for the past 4 years. This..not all that long ago there was a run on Primers and some places were showing backorders in the Tens of Millions of primers. So far it doesnt look too bad for most "Standard" cartridges, although a friend who loads 7.62X39 says hes having problems finding .311 bullets. Quote Share this post Link to post Share on other sites
KpdPipes 388 Posted January 27, 2013 strike anywhere matches work well. Funny you mention that, there is an article in the current "Backwoodsman' about reloading RIMFIRE rounds, using Strike-anywhere compund Quote Share this post Link to post Share on other sites
Mike48 0 Posted January 30, 2013 I did'nt see anyone mention this, but if someone does manage to rob you in those desperate days, they will more likely take your boxes of ready made ammo, than be troubled with your reloading stuff...if they even know what it is..... someone did say that it was good to have multiple options Quote Share this post Link to post Share on other sites
zoid 24 Posted January 31, 2013 Ammo is ammo. If you have the ability to stock a lot of it I don't see how that is better or worse than someone who has reloading gear. I'd rather have 1000s of rounds of ready made factory ammo than enough components to reload 1000s of rounds. Only reason I don't is cause I can't afford it. If I was wealthy I wouldn't bother reloading. Quote Share this post Link to post Share on other sites
Kaiser7 33 Posted January 31, 2013 I think it's not a perfect solution. But to have the knowledge of how to do it, and the ability would be useful. Let's say you can't get factory ammo, but you are somehow able to get reloading supplies, just having the experience in it will be more beneficial than if you don't have any experience. As with any SHTF situation, having a broad base of knowledge applicable to any potential situation that may arise is important. Not to mention that reloading helps you to better understand bullet characteristics, and how they behave when fired. In the end, reloading may not be crucial, for the fact that it may not be possible to acquire components, but knowledge, and the ability to do so helps you be prepared for situations that could potentially arise. Quote Share this post Link to post Share on other sites
so_dank 0 Posted January 31, 2013 I'm hoping the other Guy is a horrible shot and ill just take his ammo. Hope he has expensive ammo lol JK Quote Share this post Link to post Share on other sites
hd2000fxdl 422 Posted February 1, 2013 Ammo is ammo. If you have the ability to stock a lot of it I don't see how that is better or worse than someone who has reloading gear. I'd rather have 1000s of rounds of ready made factory ammo than enough components to reload 1000s of rounds. Only reason I don't is cause I can't afford it. If I was wealthy I wouldn't bother reloading. I agree, ammo is ammo and for HD/SD I use factory SD/HD ammo and not reloads, but for having ammo on hand ill say reloads BS. Factory I can do close to a 3:1 ratio of reloads vs. factory, so for the same cost I would rather have between 2500-3000 rounds vs 1000 rounds at the ready. Sent from my iPad using Tapatalk Quote Share this post Link to post Share on other sites
ECShooter 0 Posted February 1, 2013 All this talk about shtf and ammo, but does anyone have their scissors ready? If it works in an active shooter situation, these should be part of your defense in depth shtf kit! Quote Share this post Link to post Share on other sites
JackDaWack 2,895 Posted February 2, 2013 I hope u guys have your pantries stocked if your that worried about SHTF and ammo, you can eat lead, but the results will be less than satisfactory. Quote Share this post Link to post Share on other sites
ECShooter 0 Posted February 2, 2013 I hope u guys have your pantries stocked if your that worried about SHTF and ammo, you can eat lead, but the results will be less than satisfactory. Mmmmm... Lead Sent from my iPad using Tapatalk HD Quote Share this post Link to post Share on other sites
Vlad G 345 Posted February 2, 2013 To say nothing that you live in NJ, with 8mil other people and in 30 days there won't be a rat, stray cat, or bird left to hunt and the waters will be so full of sewage and chemicals eating a fish out of them would probably kill you. Quote Share this post Link to post Share on other sites
Sixtytwo327 14 Posted February 2, 2013 Being self sufficient beyond that in a true shtf scenario is something else .... For instance.... Those that say they will just hunt for food....ok.... Shtf grid is offline how are you going to store your meat? How many KNOW how to salt cure etc....same with fish This. While we're at it, know how to diagnose and treat dysentery or cholera? (Without Google?) Moral is, reloading is a hobby, and a very cool hobby, but like every other hobby, it is entirely dependent on commercially manufactured components. Reloading can yield extremely accurate loads, but only after lots and lots and lots of practice and study and trial and error. It's impossible to pick up a press with no experience and crank out match-grade ammo. Remember what happened during Sandy. If you want to learn useful skills for disaster situations, take some first-aid courses and stock up on basics. Oh and playing cards, because real-life disasters are awfully boring. Quote Share this post Link to post Share on other sites