Jump to content
Avi

Gun powder possession Law

Recommended Posts

Is there a law either federal or n.j which limits the amount of gun powder one can have at his residence?

 

http://www.hodgdon.com/PDF/Hodgdon%20Basic%20Manual.pdf page 15 has the federal info. Local fire code and such can overrule.

 

Short version

 

25lbs can be transported in private vehicles.

 

50lbs in private vehicles in an approved magazine.

 

 

20lbs stored in a residence in original containers

 

50lbs in a portable wooden box with walls having a nominal thickness of 1 inch.

 

100lbs in a fixed wooden box with walls of 1 inch.

 

etc.

Share this post


Link to post
Share on other sites
25lbs can be transported in private vehicles.

20lbs stored in a residence in original containers

So I can transport 25lbs, but only keep 20lbs in my house....that just doesn't seem logical. I also remember that we came to the conclusion you could store 36lbs at your house.

Share this post


Link to post
Share on other sites

Anybody else find it funny that the fire codes require you to store a flammable substance in a wooden box?

 

so better something that gives easier rather than creating a really big hand grenade.

 

That's exactly the reasoning. Containing it in wood doesn't allow the pressure inside to build up as it would with metal. The wood gives sooner creating a fireball instead of exploding as steel would.

Share this post


Link to post
Share on other sites
Guest schutzen-jager

different set of federal + state laws for black powder -

Share this post


Link to post
Share on other sites

so under all estimates it looks like 20ibs at a time is definitely ok FEd & State, that should be plenty for me unless i get addicted to reloading like some on here

 

I can see different powders adding up but if you only are using 1 or 2 that'd be a lot of powder and lots of reloading to do. :)

 

Harry

Share this post


Link to post
Share on other sites

Wood is also a preferred container material because of its fire protection/insulation propertied. If I recall correctly, the fire academy taught us that it takes fire 1 hour to burn 1 inch of wood. If you have 1 inch walls on your container it would ideally provide an hour of fire protection without breeching the walls.

Share this post


Link to post
Share on other sites

Anybody else find it funny that the fire codes require you to store a flammable substance in a wooden box? :banghead:

 

 

No,

 

This makes perfect sense. Smokeless powder burns under heat but EXPLODES under heat and pressure.

The wooden box will burn and release pressure so there is no explosion.

 

Black powder is another story.

Share this post


Link to post
Share on other sites

I've been keeping the few bottles of powder in a 50 cal ammo can... i guess this is a bad idea then according to the federal guidance?

 

Probably. Ammo cans have seals designed to melt before the ammo cooks off, but I don't think they are designed to expel the amount of gas you get from a can full of powder.

Share this post


Link to post
Share on other sites

Anybody else find it funny that the fire codes require you to store a flammable substance in a wooden box?

 

so better something that gives easier rather than creating a really big hand grenade.

 

That's exactly the reasoning. Containing it in wood doesn't allow the pressure inside to build up as it would with metal. The wood gives sooner creating a fireball instead of exploding as steel would.

 

Wood is also non-conductive, and not prone to static discharge.

Share this post


Link to post
Share on other sites

What about an out building like a shed or barn? How much is allowed there?

Not to skirt your question (I don't know about storage limits in out-buildings) but I would not store my powder in such an unstable (temperature-wise) setting.

Powder should be stored in a cool dark place if you want to maintain its combustion properties.

Zombies may not care about a few hundred f.p.s., but my 600 yard match targets would certainly reflect the changes in the powder from poor storage.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.



  • olight.jpg

    Use Promo Code "NJGF10" for 10% Off Regular Items

  • Supporting Vendors

  • Latest Topics

  • Posts

    • We never let then inside.  Last re-evaluation was 6-7 years ago, wife politely told him that he was welcome to look around the property and he could look in the windows. He saw two white resin chairs in the basement and told her that this constituted a finished basement. And everything in the basement is bare concrete/ cinder block, and mechanical systems. Nothing finished about it. Ultimately he relented and I'm sure that was a ploy to coerce us to allow him in
    • I use an Alien Gear cloak tuck (IWB) with my Shield.  Neoprene back - in the summer it does feel warm but doesn't rub or chafe.   https://aliengearholsters.com/ruger-lcp-iwb-holster.html Could also go with the shapeshift as it has multiple options - OWB/IWB, Appendix... https://aliengearholsters.com/ruger-lcp-shapeshift-modular-holster-system.html
    • The  12-1 compression ratio L88 is long gone. This is GM's updated version. it might be  pump gas 10-1 engine The L88 was a aluminum head  cast iron block engine with a nasty solid lifter cam. the  ZL1 was a all aluminum  12 or 13-1 compression ratio engine with the best forged internal parts at the time and had a even nastier solid lifter cam 
    • I like my regular carry holster.  OWB leather with belt slots.  I've been carrying for over a year and it was comfortable and I hardly even noticed it.  I carry (usually) a Ruger LCP .380 - light, convenient, tiny. But...today I ended up taking it off an leaving it home after a few hours. I cut down a big maple tree a few days ago and I spent 3/4 of today loading and unloading firewood into the back of my truck and a trailer.  It was a warm day, I was dirty, tired, sweaty, and my holster was rubbing against my side.  The leather and exposed metal snap was no longer comfortable. I'm thinking about adding a layer of something to that part of the holster to soften the contact.  Anything insulating will make it worse.  I don't want a sweaty, hotter holster against my skin.  I'm imagining something thin, breathable, that won't absorb sweat, and softer than leather, metal snaps, and rivets.   But I have no idea what would work. I'm hoping somebody else has already figured this out and I can just do what they did. Any suggestions appreciated.
    • Check the primers on the ammo you didn't shoot yet. Are they fully seated? If the primer is not just below flush with the back of the case, the first hit can seat it better then the second hit ignites it. 
×
×
  • Create New...