PA FFL/Gunsmith recommendations?
By
Sig, in Ranges & Gun Shops
-
Recently Browsing 0 members
No registered users viewing this page.
-
Supporting Vendors
-
Latest Topics
-
-
Similar Content
-
By My1stGlock
I'm sure most of us in Central Jersey, Monmouth county know about Steve's compliance work but figured I put it out there for those that are looking for great work and reasonable prices.
Here's some pics of the brake up close and the pin/weld. That little dot is the pin and weld on the last image. Looks like factory! The other pics are just since I'm uploading anyways lol. What do u guys think about the red mag release. I'm on the fence on that. Gonna add a vertical foregrip and prob a red dot w/ irons when its all said and done.
-
By My1stGlock
Although it's not a NJ establishment I believe West Side Rifle and Pistol Range is the last indoor gun range that exists in NYC of all places. I happen to know the guys and they are a great bunch of guys. I found out that they are also hurting like all other self owned businesses and someone mentioned they have a gofundme page currently. The fact that they are a 2A establishment and also the only one left in the NYC I figured i can let our forum members know about their page. They did not come to me about this but if I can help out a business/friend and spread the word I will do so and for a good bunch of guys. I understand that for some of us it's hard to donate but if you can that would be great. If you can also spread the word and post on your social media sites that would be great. I would do so but I don't have any accounts on FB, IG or other sites. If you do donate drop them a message that it was you heard about them via NJGF!
https://www.gofundme.com/f/west-side-rifle-and-pistol-range-inc
Thank you and sorry for asking......
-
By JerseyJim
As with most N.J. owners, the new law reducing max magazine capacity from 15 to 10 rounds affects me the most. The question(s) I have concern the legality and practicality of reducing a magazine capacity to 10 rounds to be in compliance with the law. Reading many forums and opinions I can't get a definitive strategy on how I can keep the 15 round mags I already own. All mags accompanied handguns purchased in New Jersey. Now I have less than 180 days to deal with them. My current quandary:
Magazines must be permanently modified to limit them to 10 round capacities. California forums seem to indicate that one can rivet, epoxy or weld a block to make a mag legal. However the wording of the new N.J. statute gives me pause. It says:
"The bill makes its provisions effective immediately, but allows for a 180-day grace period to transfer, render inoperable, or voluntarily surrender a semi-automatic rifle or magazine that will be unlawful under the bill."
Does "render inoperable" include reducing capacity to 10 rounds? Is the high capacity nature of a magazine the aspect that must be inoperable or must the magazine be destroyed altogether?
I have gone ahead and ordered mag conversion kits for two of my 9mm mags and will permanently modify them whenever I can find out what that will mean in N.J.
My other complaint I will throw out there is the unfortunately lack of 10 round factory magazines in stock. In particular, Walther and Glock mags in low capacity are very hard to find and the situation is likely to worsen now that we are a 10 round state. I also imagine N.J. gun stores will be sending hundreds of 15 round firearms packages back to their distributors.
What a mess.
-
By remixer
Sig Sauer P320 X-Five 9mm
$849.99 plus NJ Nics (15.00) and NJ Tax
MODEL: P320 X-Five
CALIBER:9mm
BARREL:5"
ACTION:Double Action Only
SIGHTS:FS: Fiber Optic/RS: Adjustable
FINISH:Nitron
-
By remixer
Pre-Owned
Sig Sauer P320 9mm Compact RX with Night Sights
$575.00 plus NJ Nics (15.00) and NJ Tax
Gently Used. 100% Condition, Low Round Count. Sig Upgraded Trigger
Original Box and Accessories.
Stock Photo, Actual photo to be uploaded shortly.
-
-
Posts
-
We never let then inside. Last re-evaluation was 6-7 years ago, wife politely told him that he was welcome to look around the property and he could look in the windows. He saw two white resin chairs in the basement and told her that this constituted a finished basement. And everything in the basement is bare concrete/ cinder block, and mechanical systems. Nothing finished about it. Ultimately he relented and I'm sure that was a ploy to coerce us to allow him in
-
I use an Alien Gear cloak tuck (IWB) with my Shield. Neoprene back - in the summer it does feel warm but doesn't rub or chafe. https://aliengearholsters.com/ruger-lcp-iwb-holster.html Could also go with the shapeshift as it has multiple options - OWB/IWB, Appendix... https://aliengearholsters.com/ruger-lcp-shapeshift-modular-holster-system.html
-
By silverado427 · Posted
The 12-1 compression ratio L88 is long gone. This is GM's updated version. it might be pump gas 10-1 engine The L88 was a aluminum head cast iron block engine with a nasty solid lifter cam. the ZL1 was a all aluminum 12 or 13-1 compression ratio engine with the best forged internal parts at the time and had a even nastier solid lifter cam -
By maintenanceguy · Posted
I like my regular carry holster. OWB leather with belt slots. I've been carrying for over a year and it was comfortable and I hardly even noticed it. I carry (usually) a Ruger LCP .380 - light, convenient, tiny. But...today I ended up taking it off an leaving it home after a few hours. I cut down a big maple tree a few days ago and I spent 3/4 of today loading and unloading firewood into the back of my truck and a trailer. It was a warm day, I was dirty, tired, sweaty, and my holster was rubbing against my side. The leather and exposed metal snap was no longer comfortable. I'm thinking about adding a layer of something to that part of the holster to soften the contact. Anything insulating will make it worse. I don't want a sweaty, hotter holster against my skin. I'm imagining something thin, breathable, that won't absorb sweat, and softer than leather, metal snaps, and rivets. But I have no idea what would work. I'm hoping somebody else has already figured this out and I can just do what they did. Any suggestions appreciated. -
Check the primers on the ammo you didn't shoot yet. Are they fully seated? If the primer is not just below flush with the back of the case, the first hit can seat it better then the second hit ignites it.
-
-