-
Recently Browsing 0 members
No registered users viewing this page.
-
Supporting Vendors
-
-
Latest Topics
-
-
Similar Content
-
By RetNJ47
Selling my Troy A4 “Other” Firearm 5.56(.223) with Blast Shield (faux suppressor) and BA Hanson profile 11.3” precision barrel with Silencer Co ASR muzzle brake.
Had gunsmith remove pin and welded muzzle brake on stock 10.5” inch barrel. Upgraded to BA 11.3” performance barrel bringing OAL to 26.8 inches without pin and welded muzzle device. ASR threaded Silco brake added with 6” Blast Shield. Trigger/Feed Ramp polish job for smoother take up and crisp reset(for a Mil-Spec trigger). Only 40 rounds have been fired for testing and proper initial barrel break in using Modern Spartan Systems accuracy oil between shot cycles.
Full list of modifications:
-Ballistic Advantage Hanson Profile 5.56 chambered 11.3 inch Performance Series Barrel
-SilencerCo Muzzle Brake
-SDTA 6” Blast Shield
-SBA3 Brace (Black or possibly FDE available)
-Magpul Gen 2 BUIS and Vertical Foregrip
-CMMG Stainless Gas Tube
$1550
Located in Toms River with closest FFL being Weshoot/Shoreshot. Buyer responsible for transfer fee at FFL.
Still have stock barrel also if interested.
**Eotech Not Included** if interested it’s an EOtech EXPS2-0 and I have a G43 magnifier w/STS mount and Surefire light with pressure pad to go along with it.
-
By My1stGlock
Searched this forum but didn't see anything on this yet.
Has anyone played with the Magpul DAKA grid organizers yet? Seems nifty but anyone has one that can provide feedback on them? Losta vidoos online. Yer thoughts
I know some will say $130 for Styrofoam? I guess it's just the modularity that appeals to me. Got a Pelican 1720 for Christmas and was looking at the closed foam option and ran across this too.
https://magpul.com/daka-grid-organizer-pelican-1720.html?mp_global_color=118
-
By My1stGlock
Have some items that I either bought new and never used or used and ended up going with another option. All NEW items in the original boxes used items are like new condition unless indicated. What you see in the pics is what you are getting. I will list all the new items first then the used items. SOLD items will be marked as such.
I will meet in Marlboro, Howell, Manalapan, Matawan, Old Bridge and East Brunswick or ship your cost. If you are nearby PM me and maybe we can meet up.
Payments will be either via cash F2F or PayPal and Zelle if shipped.
NEW Magpul Angled Fore Grip in BLK $25
NEW Magpul Angled Fore Grip in GREY $25
NEW Magpul M-Lok Rail Cover Type 2 in BLK, THREE for sale SOLD
NEW Magpul M-Lok Rail Cover Type 2 in GREY, THREE for sale $12/ea or $33 for all
NEW BCM Gunfighter VLTOR Mod 4 Med Charging Handle SOLD
NEW Fail Zero M16 Nickel Boron BCG $160
NEW Bastion US Flag AR15 trigger guard BLK $16
NEW Forward Controls Enhanced Mag Release Ambi Extended $70
NEW BCM Gunfighter KMSM KeyMod QD Sling mount , TWO for sale $18/ ea
USED Magpul ACS Mil Spec Stock in BLK previously pinned near friction lock $75 LIKE NEW comes with Magpul sticker too.
USED Magpul MOE 1911 grip panels in FDE $15 LIKE NEW
USED Magpul MOE handguard carbine length in BLK $20 LIKE NEW
USED Mission First Tactical Battle Link Mil Spec stock in GRY previously pinned near spring mechanism $40 LIKE NEW
USED Seekins Ambi Safety selector in FDE but looks more like gold to me $30 LIKE NEW
USED La Rue Trigger Action Chassis $8 LIKE NEW
USED Butler Creek scope cover rear #19 EYE $8 LIKE NEW
USED Butler Creek scope cover front #31 OBJ $8 LIKE NEW
USED Yankee Hill Machine AR15 EZ Pull take down pins $10 HAS WEAR
First to POST "I'll take it" followed by PM will get first dibs and sale. I may take some time to reply but will honor the order of the posts w/ PM.
-
By Blank
These will be in NJ Stores soon.
Description
100% MADE IN AMERICA. All MODMAT rifles are made from domestic parts and assembled in New Jersey. Fully NJ and Federally compliant when purchased as a FIREARM. Total OAL 26.1″ w/ SB Tactical SBA3 Brace in closed position CERAKOTE FINISH: Blackened Cobalt, Slate Grey Burgundy Bronze, Patriot Brown or Sniper Green. MM Exit 5.56 V2 Muzzle Brake virtually eliminates muzzle climb while shooting. Designed and manufactured in New Jersey. Has NATO grooves for installation of blast shield or silencer. Ballistic Advantage 5.56 Government Profile, 11.5″ Carbine length AR15, Modern Series Barrel. Machined from 4150 Chrome Moly Vanadium steel with a QPQ corrosion resistant finish and M4 feed ramp extension. Ballistic Advantage .750″ pinned Lo-Pro Gas Block with QPQ corrosion resistant finish. Modern Materiel 10″ ultralight free float hand guard – Full Picatinny top rail and M-LOK mounting in 3, 6 & 9 o’clock positions. Domestic 8620 M16 Bolt Carrier Group and 9310 bolt with QPQ corrosion resistant finish. Flattop Upper Receiver – 7075 T6 forged aluminum with ejection port cover and brass deflector. MM Lower Receiver – 7075 T6 forged aluminum with magwell texture and integrated trigger guard. Magpul MOE pistol grip with extended trigger reach for more precise trigger control. Magpul MOE MVG M-LOK vertical fore grip. SB Tactical™ Pistol Stabilizing Brace (SB3) – provides all of the advantages of a handgun, but with a third point of contact — adding greater stability, accuracy and control. Also includes: One 10/30-round Mission First Tactical (MFT) magazine. -
By Maksim
Pretty dang good deal for $99 with free shipping. Lower Parts Kit with trigger group along with a buffer tube, buffer, Magpul MOE stock and pistol grip. Will need to put a pin in to fix for NJ.
Link
Mil-Spec MOE Stock: A drop-in replacement buttstock using mil-spec sized receiver extension tubes. Rubber butt-pad which prevents shoulder slippage.
MOE Trigger Guard: A drop-in replacement rear trigger guard. Features "V" shape for better use of gloves, non-folding, with round edges.
MOE+ AR-15 Pistol Grip: combines reinforced polymer body construction with comfortable, wrap-around over-molding for maximum weapon control.
PSA Classic Lower Parts Kit: Provides the part necessities to assemble your AR lower. By Palmetto State Armory.
Mil-Spec Buffer Tube Assembly: 7075 aluminum with buffer springs
Link to PSA
-
-
Posts
-
We never let then inside. Last re-evaluation was 6-7 years ago, wife politely told him that he was welcome to look around the property and he could look in the windows. He saw two white resin chairs in the basement and told her that this constituted a finished basement. And everything in the basement is bare concrete/ cinder block, and mechanical systems. Nothing finished about it. Ultimately he relented and I'm sure that was a ploy to coerce us to allow him in
-
I use an Alien Gear cloak tuck (IWB) with my Shield. Neoprene back - in the summer it does feel warm but doesn't rub or chafe. https://aliengearholsters.com/ruger-lcp-iwb-holster.html Could also go with the shapeshift as it has multiple options - OWB/IWB, Appendix... https://aliengearholsters.com/ruger-lcp-shapeshift-modular-holster-system.html
-
By silverado427 · Posted
The 12-1 compression ratio L88 is long gone. This is GM's updated version. it might be pump gas 10-1 engine The L88 was a aluminum head cast iron block engine with a nasty solid lifter cam. the ZL1 was a all aluminum 12 or 13-1 compression ratio engine with the best forged internal parts at the time and had a even nastier solid lifter cam -
By maintenanceguy · Posted
I like my regular carry holster. OWB leather with belt slots. I've been carrying for over a year and it was comfortable and I hardly even noticed it. I carry (usually) a Ruger LCP .380 - light, convenient, tiny. But...today I ended up taking it off an leaving it home after a few hours. I cut down a big maple tree a few days ago and I spent 3/4 of today loading and unloading firewood into the back of my truck and a trailer. It was a warm day, I was dirty, tired, sweaty, and my holster was rubbing against my side. The leather and exposed metal snap was no longer comfortable. I'm thinking about adding a layer of something to that part of the holster to soften the contact. Anything insulating will make it worse. I don't want a sweaty, hotter holster against my skin. I'm imagining something thin, breathable, that won't absorb sweat, and softer than leather, metal snaps, and rivets. But I have no idea what would work. I'm hoping somebody else has already figured this out and I can just do what they did. Any suggestions appreciated. -
Check the primers on the ammo you didn't shoot yet. Are they fully seated? If the primer is not just below flush with the back of the case, the first hit can seat it better then the second hit ignites it.
-
-