-
Supporting Vendors
-
-
Latest Topics
-
-
Similar Content
-
By RetNJ47
Selling my Troy A4 “Other” Firearm 5.56(.223) with Blast Shield (faux suppressor) and BA Hanson profile 11.3” precision barrel with Silencer Co ASR muzzle brake.
Had gunsmith remove pin and welded muzzle brake on stock 10.5” inch barrel. Upgraded to BA 11.3” performance barrel bringing OAL to 26.8 inches without pin and welded muzzle device. ASR threaded Silco brake added with 6” Blast Shield. Trigger/Feed Ramp polish job for smoother take up and crisp reset(for a Mil-Spec trigger). Only 40 rounds have been fired for testing and proper initial barrel break in using Modern Spartan Systems accuracy oil between shot cycles.
Full list of modifications:
-Ballistic Advantage Hanson Profile 5.56 chambered 11.3 inch Performance Series Barrel
-SilencerCo Muzzle Brake
-SDTA 6” Blast Shield
-SBA3 Brace (Black or possibly FDE available)
-Magpul Gen 2 BUIS and Vertical Foregrip
-CMMG Stainless Gas Tube
$1550
Located in Toms River with closest FFL being Weshoot/Shoreshot. Buyer responsible for transfer fee at FFL.
Still have stock barrel also if interested.
**Eotech Not Included** if interested it’s an EOtech EXPS2-0 and I have a G43 magnifier w/STS mount and Surefire light with pressure pad to go along with it.
-
By jrfly3006
WTS my like new Eotech EXPS2-2. Selling only because ive moved onto a LPVO. It shows a build date of 2016 on the box. I bought this from someone in 2018 and it's been to the range with me 4 or 5 times. I ran the serial # through Eotech CS and came back legit. It works and looks brand new. I just put new batteries in it. This is the quick detach model which allow fast on/off the gun with a return to zero. Come with factory box and registration card. Any question please ask!. Can ship on your dime or meet up in Monmouth County near Marlboro
Asking $300
First "I'll take it" wins this beauty.
SOLD to Cam29906
-
By High Exposure
This is my shocked face.
Of course people will still defend their choice in optic - no one like to admit the have an ugly baby - hopefully this will keep new purchases from disappointing recreational shooters and endangering people that carry rifles for a living.
In "unrelated" news FBI HRT has switched to Aimpoints.
http://soldiersystems.net/2015/11/24/us-government-sues-l3-communications-for-fraud-involving-eotech-sights/
ETA: Earlier topic on EOTech issues and a safety notice to all USG users:
http://njgunforums.com/forum/index.php/topic/78404-ussocom-issues-safety-of-use-message-for-eotech/page-3#entry997216
-
By AlexTheSane
LAPoliceGear has a 12% off coupon code for Eotech sights.
XPS2 comes out to $439.11 with free shipping.
http://www.lapolicegear.com/eotech.html
Code EOTECH12
-
By Bugsy732
So i finally got to take "Krystal", my Umbrella Corp. build to the range yesterday. Robs609 and my self helped Firearms Training Sepulveda Firearms Training film some instructional videos at Shooters last night. While Robs609 got to shoot her more than i did, i was able to pop off a few rounds and give a quick test to the Umbrella Corp BCG and SSA trigger i installed yesterday. Rob, Kharis and myself agree... the SSA Trigger is where it's at! So much smoother and tighter than the Spikes Battle Trigger i had in there before.
shot about 50 rounds w/no FTF or FTE with the new Umbrella BCG. More info on that after i get some more trigger time on her.
anyway, here are a few photos and vids from yesterday.. check out that muzzle flash! lol
Thanks to ROBS609 for being our designated shooter for the videos.
anyway, thought we would share!
-
-
Posts
-
We never let then inside. Last re-evaluation was 6-7 years ago, wife politely told him that he was welcome to look around the property and he could look in the windows. He saw two white resin chairs in the basement and told her that this constituted a finished basement. And everything in the basement is bare concrete/ cinder block, and mechanical systems. Nothing finished about it. Ultimately he relented and I'm sure that was a ploy to coerce us to allow him in
-
I use an Alien Gear cloak tuck (IWB) with my Shield. Neoprene back - in the summer it does feel warm but doesn't rub or chafe. https://aliengearholsters.com/ruger-lcp-iwb-holster.html Could also go with the shapeshift as it has multiple options - OWB/IWB, Appendix... https://aliengearholsters.com/ruger-lcp-shapeshift-modular-holster-system.html
-
By silverado427 · Posted
The 12-1 compression ratio L88 is long gone. This is GM's updated version. it might be pump gas 10-1 engine The L88 was a aluminum head cast iron block engine with a nasty solid lifter cam. the ZL1 was a all aluminum 12 or 13-1 compression ratio engine with the best forged internal parts at the time and had a even nastier solid lifter cam -
By maintenanceguy · Posted
I like my regular carry holster. OWB leather with belt slots. I've been carrying for over a year and it was comfortable and I hardly even noticed it. I carry (usually) a Ruger LCP .380 - light, convenient, tiny. But...today I ended up taking it off an leaving it home after a few hours. I cut down a big maple tree a few days ago and I spent 3/4 of today loading and unloading firewood into the back of my truck and a trailer. It was a warm day, I was dirty, tired, sweaty, and my holster was rubbing against my side. The leather and exposed metal snap was no longer comfortable. I'm thinking about adding a layer of something to that part of the holster to soften the contact. Anything insulating will make it worse. I don't want a sweaty, hotter holster against my skin. I'm imagining something thin, breathable, that won't absorb sweat, and softer than leather, metal snaps, and rivets. But I have no idea what would work. I'm hoping somebody else has already figured this out and I can just do what they did. Any suggestions appreciated. -
Check the primers on the ammo you didn't shoot yet. Are they fully seated? If the primer is not just below flush with the back of the case, the first hit can seat it better then the second hit ignites it.
-
-