Jump to content
DanMarvel

Polymer 80 legal in NJ?

Recommended Posts

So...I drive out to PA, set up my drill press, and finish this thing.   Can I then legally bring it back home to NJ?  Forget the complicated transport laws.  I'm just asking about "taking possession" of a newly manufactured handgun that I manufactured.

Share this post


Link to post
Share on other sites
So...I drive out to PA, set up my drill press, and finish this thing.   Can I then legally bring it back home to NJ?  Forget the complicated transport laws.  I'm just asking about "taking possession" of a newly manufactured handgun that I manufactured.

 

Yup. And some people have finished them just with dremels.

 

I believe it is legal to finish the frame in another state that allows personal firearms manufacture and then bring it back into NJ.

 

It is legal to possess a firearm in NJ that you legally acquired in another state without registration in NJ (registration is voluntary) or using a NJ Purchase Permit (only necessary for acquiring a handgun within NJ).

 

I don't see any practical difference, NJ law-wise, in finishing a polymer 80 frame out of state and returning to NJ with it vs. buying a bb pistol or black powder pistol in another state and returning to NJ with it.

 

Optional, but probably a good idea - get a serial # engraved into the unfinished frame before completing it. I'm contemplating 'FSCKWEINBERG001' for my serial #.

 

I plan to do just this, just waiting for a free weekend.  Anyone who'd like to coordinate a time/place to do them in PA, I'm all ears.

Share this post


Link to post
Share on other sites

I assume if you are a nj resident and acquire/build the pistol out of state you would have to transfer it, use p2p.

 

Why?  You can go to Cabela's in PA, buy a bb pistol or a black powder pistol, both of which are considered handguns per NJ law, and return to NJ with them without needing a P2P.

 

P2P is only for acquiring a handgun *IN* NJ.  P2P's have no meaning for pistols legally acquired out of state.  Do people who move into NJ with pistols they acquired while residents of other states have to transfer them into NJ with P2P's?  Of course not.

Share this post


Link to post
Share on other sites

My only concern is numbers. But , as my wife suggested. Mrsz00001 would be ok.

But not in this state for stamping or the 20%

 

I don't think stamping in NJ is verboten, as long as it's still an unfinished frame.  Until it's a finished frame, it's just a hunk of plastic.  Stamp it, engrave it, scratch it, mark it all you want while in NJ.

Share this post


Link to post
Share on other sites

Why?  You can go to Cabela's in PA, buy a bb pistol or a black powder pistol, both of which are considered handguns per NJ law, and return to NJ with them without needing a P2P.

 

P2P is only for acquiring a handgun *IN* NJ.  P2P's have no meaning for pistols legally acquired out of state.  Do people who move into NJ with pistols they acquired while residents of other states have to transfer them into NJ with P2P's?  Of course not.

 

You're missing the key word "resident". 

Share this post


Link to post
Share on other sites

I'm curious to which travel exemption will get it back to a NJ home from PA.

who cares. Don't drive like a idiot and if you do and get pulled over don't consent to a search. If the police get a warrent and search your vehicle you've got bigger problems. Or if you really want to abide by dumb laws you could go to a range in PA. Finish it in the parking lot and drive home from a range to your home.
  • Like 2

Share this post


Link to post
Share on other sites

who cares. Don't drive like a idiot and if you do and get pulled over don't consent to a search. If the police get a warrent and search your vehicle you've got bigger problems. Or if you really want to abide by dumb laws you could go to a range in PA. Finish it in the parking lot and drive home from a range to your home.

so the travel exemption is coming home from a range. May work with a functioning handgun that you were able to build in PA and go to a range with (altho I doubt NJ would share that sentiment just because its NJ). Just a lower, maybe not. An argument could be made that the law doesnt say you HAVE to actually shoot the "firearm" at a range just be there, or maybe it does idk .....Just sounds like a dumb game to accomodate dumb laws and win dumb prizes. And the point of even having to worry about getting pulled over doesnt build confidence of the legitimacy of the whole operation. A little too sketchy for me but for anyone else have at it. And be sure to post pics here after its done.

Share this post


Link to post
Share on other sites

cops won't know if you have dope in the car unless you get stopped and searched.

cops won't know if you have tons of cash in the car unless you get stopped and searched.

cops won't know if you have guns in the car unless you get stopped and searched.

etc.

 

here's a hint: don't do stupid shit that gets you stopped, and don't do stupid shit that gets you searched.

  • Like 3

Share this post


Link to post
Share on other sites

You're missing the key word "resident".

No, you're too focused on the word 'resident'.

 

If you legally acquired the firearm outside of NJ, and the firearm is otherwise legal to possess in NJ, then you don't have to do anything to bring it into NJ other than follow transport laws.

 

Manufacturing it in PA, whether a resident of PA or not, is legally acquiring the firearm.

  • Like 1

Share this post


Link to post
Share on other sites

No, you're too focused on the word 'resident'.

 

If you legally acquired the firearm outside of NJ, and the firearm is otherwise legal to possess in NJ, then you don't have to do anything to bring it into NJ other than follow transport laws.

 

Manufacturing it in PA, whether a resident of PA or not, is legally acquiring the firearm.

 

Have at it.  Bring it to the NJSP barracks and let me know how you make out.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.



  • olight.jpg

    Use Promo Code "NJGF10" for 10% Off Regular Items

  • Supporting Vendors

  • Latest Topics

  • Posts

    • We never let then inside.  Last re-evaluation was 6-7 years ago, wife politely told him that he was welcome to look around the property and he could look in the windows. He saw two white resin chairs in the basement and told her that this constituted a finished basement. And everything in the basement is bare concrete/ cinder block, and mechanical systems. Nothing finished about it. Ultimately he relented and I'm sure that was a ploy to coerce us to allow him in
    • I use an Alien Gear cloak tuck (IWB) with my Shield.  Neoprene back - in the summer it does feel warm but doesn't rub or chafe.   https://aliengearholsters.com/ruger-lcp-iwb-holster.html Could also go with the shapeshift as it has multiple options - OWB/IWB, Appendix... https://aliengearholsters.com/ruger-lcp-shapeshift-modular-holster-system.html
    • The  12-1 compression ratio L88 is long gone. This is GM's updated version. it might be  pump gas 10-1 engine The L88 was a aluminum head  cast iron block engine with a nasty solid lifter cam. the  ZL1 was a all aluminum  12 or 13-1 compression ratio engine with the best forged internal parts at the time and had a even nastier solid lifter cam 
    • I like my regular carry holster.  OWB leather with belt slots.  I've been carrying for over a year and it was comfortable and I hardly even noticed it.  I carry (usually) a Ruger LCP .380 - light, convenient, tiny. But...today I ended up taking it off an leaving it home after a few hours. I cut down a big maple tree a few days ago and I spent 3/4 of today loading and unloading firewood into the back of my truck and a trailer.  It was a warm day, I was dirty, tired, sweaty, and my holster was rubbing against my side.  The leather and exposed metal snap was no longer comfortable. I'm thinking about adding a layer of something to that part of the holster to soften the contact.  Anything insulating will make it worse.  I don't want a sweaty, hotter holster against my skin.  I'm imagining something thin, breathable, that won't absorb sweat, and softer than leather, metal snaps, and rivets.   But I have no idea what would work. I'm hoping somebody else has already figured this out and I can just do what they did. Any suggestions appreciated.
    • Check the primers on the ammo you didn't shoot yet. Are they fully seated? If the primer is not just below flush with the back of the case, the first hit can seat it better then the second hit ignites it. 
×
×
  • Create New...