coley 1 Posted December 25, 2010 Hello all, I wanna buy myself a nice Christmas present and I've been looking at different .308 semi-automatics online. I've been to a couple different shops and I haven't been able to hold any, so I'm pretty open to suggestions. I'm interested in killing some paper at 100-200 yards (not competition) and my budget is up to $1500, but will go a little higher if needed. I currently own a couple handguns and a 22 rifle. Any suggestions? Quote Share this post Link to post Share on other sites
Maksim 1,504 Posted December 25, 2010 some sort of an AR-10, a PTR91, a Vepr in 308, you have plenty of options. Quote Share this post Link to post Share on other sites
vjf915 456 Posted December 25, 2010 I'm interested in killing some paper at 100-200 yards (not competition) and my budget is up to $1500, but will go a little higher if needed. If your ONLY interest is paper targets at 100-200 yards, then an AR15 will do just as well, and cost less to both build, and to shoot as .223 is much cheaper than .308. Parts like mags will also be easier to come by. Just a suggestion. Quote Share this post Link to post Share on other sites
usnmars 136 Posted December 25, 2010 For a high powered semi look at a Romanian PSL. They shoot 7.62x54 which ballistically is almost the same as 308. They run about 500 now and are accurate. Quote Share this post Link to post Share on other sites
Pizza Bob 1,488 Posted December 25, 2010 While I hate threads where the OP asks something specific and the responders all answer something other than what was asked, I'm afraid I'm going to have to plead guilty in this instance. Why not consider a nice .308 bolt gun? Less money, less prodigious use of ammunition and just as much fun. Be circumspect in your choices, stretch your budget a little and get both a 5.56 AR type AND a .308 bolt gun - then you will really be ready when the SHTF. Welcome to the forum. Adios, Pizza Bob Quote Share this post Link to post Share on other sites
halbautomatisch 60 Posted December 25, 2010 I own numerous semi 308's and I like them all, but my favorite would have to be my Springfield M1A. They start in the $1400's for a basic model and run upwards of $2500 for a match grade. You should be able to get something really nice for $1500 - $1800. The PSL Eric mentioned above is a great value for the money if you're on a budget. Quote Share this post Link to post Share on other sites
JC_68Westy 1,024 Posted December 25, 2010 I have to agree with the M1A. I have an M1A Standard Loaded and love it. It is very accurate way past your desired range. Fifteen round magazines are available cheap from Brownells. There is a lot of DAG German surplus 7.62 NATO ammo available. Quote Share this post Link to post Share on other sites
coley 1 Posted December 25, 2010 Thanks for the suggestions. As far as a .223, I have thought about them and I have friends who own .223's. I can shoot them pretty much when ever I want. I want something different. Thought about bolt action also. In fact, that was my 1st choice... but I changed my mind.... although a .223 and a bolt action? Gotta think about that, might be an option. ;-) I've been looking at the AR-10's and M1A's.... I like them both on paper, but I haven't been able to hold one. Anyone around me stock anything? I haven't had much luck, so I'm willing to travel a bit. The Silver Bullet supposedly has three, but I guess I caught Frank on a bad day and I left when he got annoyed and started yelling when I said I wasn't sure what I wanted.... And I'm former customer. I bought a 9mm handgun and a 22 rifle off him.... I'll never set foot in his shop again. Quote Share this post Link to post Share on other sites
halbautomatisch 60 Posted December 25, 2010 Thanks for the suggestions. As far as a .223, I have thought about them and I have friends who own .223's. I can shoot them pretty much when ever I want. I want something different. Thought about bolt action also. In fact, that was my 1st choice... but I changed my mind.... although a .223 and a bolt action? Gotta think about that, might be an option. ;-) I've been looking at the AR-10's and M1A's.... I like them both on paper, but I haven't been able to hold one. Anyone around me stock anything? I haven't had much luck, so I'm willing to travel a bit. The Silver Bullet supposedly has three, but I guess I caught Frank on a bad day and I left when he got annoyed and started yelling when I said I wasn't sure what I wanted.... And I'm former customer. I bought a 9mm handgun and a 22 rifle off him.... I'll never set foot in his shop again. He's like that and I don't understand him, I get along with him, but I've seen him do just what you said. Besides you can get them cheaper than from him. I got mine at a show in PA, they're always available at better shows over there. Other than SB, in the north, maybe Bullet Hole? You should call them first. Quote Share this post Link to post Share on other sites
vladtepes 1,060 Posted December 26, 2010 DPMS 308.... 16in barrel.. well within your budget.. has been very accurate for me.. Here are the two groups I shot on Sunday... better of the two was second.. both shot a little low but I think that is just scope adjustment.. really happy with how the gun shot.. 5 shot groups.. slow from the bench.. This is the rifle.. Quote Share this post Link to post Share on other sites
stever 16 Posted December 26, 2010 M1a is great..got mine few years ago at Butches in Vineland, NJ..ShoreShot has a few..think i saw a couple at Tanners in Pa..Socom models avaiable too Quote Share this post Link to post Share on other sites
BullzeyeNJ 104 Posted December 30, 2010 Hello, I would get a Springfield M1A Scout 18" barrel. Thats what I have and love it. Put mine in a Troy MCS battle stock with Magpul PRS buttstock. That way I have an endless assortment and configuration of optics and sights to choose from and it looks very evil too Hello all, I wanna buy myself a nice Christmas present and I've been looking at different .308 semi-automatics online. I've been to a couple different shops and I haven't been able to hold any, so I'm pretty open to suggestions. I'm interested in killing some paper at 100-200 yards (not competition) and my budget is up to $1500, but will go a little higher if needed. I currently own a couple handguns and a 22 rifle. Any suggestions? Quote Share this post Link to post Share on other sites
CageFighter 236 Posted January 3, 2011 ...SCAR-17S. Quote Share this post Link to post Share on other sites
Maksim 1,504 Posted January 3, 2011 They will all be accurate enough. Really it does come down to the style of shooting you want to do. Do you want to blast away paper and feel like Rambo? Then Semi Auto. or... Do you want to spend more time staring down the scope and waiting for wind to die down to get that shot? In that case, go bolt action. But whatever you do... don't get a random gun just because it fires 308. Quote Share this post Link to post Share on other sites
vladtepes 1,060 Posted January 3, 2011 They will all be accurate enough. Really it does come down to the style of shooting you want to do. Do you want to blast away paper and feel like Rambo? Then Semi Auto. or... Do you want to spend more time staring down the scope and waiting for wind to die down to get that shot? In that case, go bolt action. But whatever you do... don't get a random gun just because it fires 308. you can do that with semi auto.. that is how I shot those groups.. just takes a little more patience.. Quote Share this post Link to post Share on other sites
vjf915 456 Posted January 3, 2011 But whatever you do... don't get a random gun just because it fires 308. This. I think that you need to decide what kind of shooting you want to do. After that, you can pick which firearm and caliber will best suit that need. Quote Share this post Link to post Share on other sites
coley 1 Posted January 9, 2011 Thanks for all the replies, but after emergency surgery on my dog for a huge tear of his skin, my firearm fund has been depleted. So... until I can save up again, this purchase will be on hold. Good news is my Greyhound will be fine. Quote Share this post Link to post Share on other sites
Dan 177 Posted January 10, 2011 Glad your dog will be OK, I can empathize with you as I have a bit of a injury prone dog also. What happened to your Greyhound? Quote Share this post Link to post Share on other sites
coley 1 Posted January 11, 2011 He caught himself on a gate latch and peeled a baseball sized chunk of skin off his flank. Greyhound skin peels like a banana..... It's really kinda gross. Quote Share this post Link to post Share on other sites
Dan 177 Posted January 11, 2011 Ouch. Hope he heals up well. Quote Share this post Link to post Share on other sites
Bob B 103 Posted January 11, 2011 http://www.clarkcustomguns.com/dpmslr308.htm Quote Share this post Link to post Share on other sites
tankcommander 4 Posted January 13, 2011 "> I have had a lot of luck with my PTR-91. I've had it for a few years bought it the first year they came out. TC Quote Share this post Link to post Share on other sites
halbautomatisch 60 Posted January 14, 2011 "> I have had a lot of luck with my PTR-91. I've had it for a few years bought it the first year they came out. TC Great gun........ although it destroys brass and kicks like a mule it's still a great gun. Quote Share this post Link to post Share on other sites
tankcommander 4 Posted January 15, 2011 Its a baby compared to a Mosin or Enfield, but it does chew up brass. Not really for a reloader. TC Quote Share this post Link to post Share on other sites
halbautomatisch 60 Posted January 16, 2011 Its a baby compared to a Mosin or Enfield, but it does chew up brass. Not really for a reloader. TC Yeah..... surplus for that baby! B) I would say less kick than a bolt action, but FAL's kick a lot less. Quote Share this post Link to post Share on other sites
Cylinder Head 22 Posted January 18, 2011 M1A's are great rifles, but Springfield examples are not to USGI spec and the cast parts (including but not specific to-the receiver) will break under hard use. If you want a great example of a USGI gun be prepared to spend good money. LRB makes excellent M1A's. That being said, get yourself a SCAR-17 and call it a day. Quote Share this post Link to post Share on other sites
Bello 9 Posted January 18, 2011 ya m1a socom 2 is my next purchase Quote Share this post Link to post Share on other sites
Shane45 807 Posted January 18, 2011 Cylinder Head, have you ever seen or even heard of a broken SA reciever? I havent and Ive looked! Dont discount cast. There are advantages to each process. It really depends who is doing the doing Id probably rather have a cast reciever from SA than a forged reciever from Norinco. Id rather have a forged LRB than a forged Norinco. Caspian 1911 frames are cast and I have FULL faith in them and would take a cast Caspian 1911 frame over a forged SA 1911 frame! The whole cast/forged/billet debate is a deep one. Been in several discussion with several metalurical experts. I came away with a headache and retained this answer. As Wild Bill Caldwell would say, Forged vs Cast vs Billet, it depends! Quote Share this post Link to post Share on other sites
Parker 213 Posted January 19, 2011 For the limited shooting I do with my SA M1A each year, last year being the most since the 90's; I still think it's good and close in appearance to the original. The investment cast receiver doesn't bother me. For a rifle that lives with me in modern times in the suburbs and goes to the range occasionally, not to battle; it's durable enough for me and should be for anyone else. It's accurate with peep sights and probably more accurate than I'm capable. I can achieve a little over 4" groups @ 200 yds. for 5-shots from a sandbagged bench rest with mine. The only knock I have against the M1A is I like to reload and hate chasing brass. (Probably why I like using the M1A's gas cutoff.) But, I'd opt for a good .308 bolt-action over an M1A as a "first" centerfire rifle for punching paper if you'd like a suggestion yet want something more than the .223. If investment casting is considered a weakness, then Ruger would have been out of business years ago. Instead, they have been using the process since 1956 and most forged Ruger barrels wear out on their rifles long before any action fatigues. Their bolt actions and single-shots are extremely strong for investment cast and can handle cartridges much more intense than a .308. Quote Share this post Link to post Share on other sites
Shane45 807 Posted January 19, 2011 Well... Parker, again it matters who is doing the doing. Olympic tried their hand at cast recievers in AR's and frankly they sucked big time! But in Rugers case its not just that they do good casting. Their guns are designed to be cast. Quote Share this post Link to post Share on other sites