Krdshrk 3,877 Posted April 13, 2015 Psa lower Smith and Wesson m&p complete upper Magpul stock Magpul grip Magpul handguard Magpul enhanced trigger guard Magpul mbus Brownells tube Brownells spring S&w buffer Magpul sights Magpul bad lever ImageUploadedByTapatalk1428882865.293664.jpg And her little pink kahr .380 Heh - doing the same thing for my lil one. Going crazier on the pink though... I got the same 3 magpul parts, a TN Arms Magpul Pink lower and got some more parts cerakoted.... Hopefully will get everything together next weekend! Quote Share this post Link to post Share on other sites
Shawnmoore81 623 Posted April 13, 2015 My wife found some pink handguard online that she wanted. It's metal and has flowers cut into it. Quote Share this post Link to post Share on other sites
Shawnmoore81 623 Posted April 13, 2015 Very nice. Hey Shawn how does the slim line magpul hand guards feel. Can you notice a difference. It does have a nice feel to it. It sure doesn't go on as easy as the moe guard though. Quote Share this post Link to post Share on other sites
almiz111 26 Posted April 16, 2015 Don't know how I screwed up the pic. Anyway as much as I love my AK this AR is fantastic. No it aint very tactikool but I bought what I wanted. I bought it as separate RRA upper and lower from Casos Jersey City. 20" NM SS heavy barrel. Gas block/rail front and A2 rail/rear irons. Wylde chamber for 556 NATO or 223REM. (this means nothing unless you are shooting 68gr NATO at 600 yards out at Camp Perry) Normal steel bolt carrier. Pinned butt stock. Houge grip. Shell deflector. Two stage NM trigger. Quote Share this post Link to post Share on other sites
T Bill 649 Posted April 16, 2015 Or nailing "dogs" with a good scope. Looks good. Quote Share this post Link to post Share on other sites
DSD1026 48 Posted April 25, 2015 OK, finally got mine completely done (or so I believe at this time until I decide there is something else I want to change).. heh. ran perfectly when i had it out the first time 2 weekends ago. Quote Share this post Link to post Share on other sites
Kimber45 3 Posted April 26, 2015 Very nice. What brake did you use? BCM mod1? Quote Share this post Link to post Share on other sites
DSD1026 48 Posted April 26, 2015 Very nice. What brake did you use? BCM mod1? thanks.. BCM Mod 0.. Barrel was already 16" so I didn't need the extra length... Quote Share this post Link to post Share on other sites
Kimber45 3 Posted April 26, 2015 Iam surprised you went with that one....most here in NJ are stuck on the fence wheather its a brake or a flashhider... I have one on my carbine it works well and as far as flash midigation AHHHHH NOT...just as flashy as my other brakes...... nice job really nice rifle.... Quote Share this post Link to post Share on other sites
DSD1026 48 Posted April 27, 2015 Flash hider.. pfffft.. lots of people have it on their guns. Im not that concerned with it. Quote Share this post Link to post Share on other sites
Dr.Jimmy Rustler 23 Posted April 29, 2015 DSD who makes that keymod rail? Quote Share this post Link to post Share on other sites
DSD1026 48 Posted April 29, 2015 DSD who makes that keymod rail? Midwest Industries.. SSK 12" FF... https://www.midwestindustriesinc.com/index.cfm?fuseaction=category.display&category_ID=1211 nice & light this was actually the package i bought.. http://palmettostatearmory.com/index.php/psa-16-chf-pencil-ssk-12-without-bcg-or-charging-handle.html Quote Share this post Link to post Share on other sites
Krdshrk 3,877 Posted May 2, 2015 Alllllllllmost done.... Quote Share this post Link to post Share on other sites
sosa9999 5 Posted May 4, 2015 Well I finally finished both of my builds. black rifle is my light weight build and burnt bronze is a .458 socom. Quote Share this post Link to post Share on other sites
mge_1 2 Posted May 6, 2015 took both out of the safe... getting some fresh air lol. Quote Share this post Link to post Share on other sites
InFamous 311 Posted May 6, 2015 took both out of the safe... getting some fresh air lol. One on the left is almost the build I want, different stock, but damn I love that look! Quote Share this post Link to post Share on other sites
mge_1 2 Posted May 6, 2015 One on the left is almost the build I want, different stock, but damn I love that look! Ahh nice... That one is my 300aac build with Spikes lower. 1 Quote Share this post Link to post Share on other sites
Rob0115 1,105 Posted June 5, 2015 Wilson combat 5.56 with match barrel and bolt, WC once piece trigger.Mega Billet matched set side charger 6mmAR chambered. No optic yet. Quote Share this post Link to post Share on other sites
jrfly3006 42 Posted June 8, 2015 My attempt at a MK12 Mod 0 "inspired" SPR Took about a year of saving, acquiring and building since it was my first AR build I haven't stretched it out to 300 yards yet (max at CJRPC) but have put about 200 rds through for testing and she runs like a champ Specs: Spikes Punisher Lower BCM Upper BCM Mod 3 CH Rainier Arms BCG Rainier Arms 18" SPR profile stainless Match Barrel .223 Wylde Chamber ALG Single Chamber Brake YHM Gas Block with flip front sight YHM FF Semi Smooth forearm Magpul MOE Grip Midwest PX LPK Geissele G2S trigger Magpul Rear BUIS Midwest PX A1/A2 receiver extension CMMG A1 Stock Harris BRMS Bipod 6-9" ADM QD Bipod mount ADM Recon QD Scope Mount Leupold VX-R Firedot Patrol 3-9x Leupold Alumina flip caps BFG Sling attached with Magpul Paraclips, BFG A1 sling mount and Magpul RSA Quote Share this post Link to post Share on other sites
Eric. 9 Posted June 8, 2015 I love MK12's. I posted my MK12 Mod 1-ish SPR in this thread. I run a VCAS sling too. http://njgunforums.com/forum/index.php/topic/10555-ar-pics-lets-seeum/page-74#entry951637 Nice gun, jrfly. Unfortunately, you have to go to PA to stretch out some (other than Cumberland in So Jersey). Eric My attempt at a MK12 Mod 0 "inspired" SPRTook about a year of saving, acquiring and building since it was my first AR buildI haven't stretched it out to 300 yards yet (max at CJRPC) but have put about 200 rds through for testing and she runs like a champSpecs:Spikes Punisher LowerBCM UpperBCM Mod 3 CHRainier Arms BCGRainier Arms 18" SPR profile stainless Match Barrel .223 Wylde ChamberALG Single Chamber BrakeYHM Gas Block with flip front sightYHM FF Semi Smooth forearmMagpul MOE GripMidwest PX LPKGeissele G2S triggerMagpul Rear BUISMidwest PX A1/A2 receiver extensionCMMG A1 StockHarris BRMS Bipod 6-9"ADM QD Bipod mountADM Recon QD Scope MountLeupold VX-R Firedot Patrol 3-9xLeupold Alumina flip capsBFG Sling attached with Magpul Paraclips, BFG A1 sling mount and Magpul RSA Quote Share this post Link to post Share on other sites
jrfly3006 42 Posted June 9, 2015 I love MK12's. I posted my MK12 Mod 1-ish SPR in this thread. I run a VCAS sling too. http://njgunforums.com/forum/index.php/topic/10555-ar-pics-lets-seeum/page-74#entry951637 Nice gun, jrfly. Unfortunately, you have to go to PA to stretch out some (other than Cumberland in So Jersey). Eric Thx Eric..my initial intent was to build an exact clone...after pricing out all of the correct parts that dream quickly faded.. ...love the way this gun shoots though..very versatile also Quote Share this post Link to post Share on other sites
ADK1113 1 Posted June 22, 2015 Sent from my XT1254 using Tapatalk 1 Quote Share this post Link to post Share on other sites
Eric. 9 Posted June 23, 2015 Thx Eric..my initial intent was to build an exact clone...after pricing out all of the correct parts that dream quickly faded.. ...love the way this gun shoots though..very versatile also Same here. Ultimately, I decided that I wasn't lookign to build a show piece/replica. I wanted the function over form i.e. higher magnification optic, modern, HP coating on BCG, etc. Also, I refused to pay KAC for their overpriced handguard/rails or buy the Ops Inc collar since we can't run suppressed in New Jerkey. Eric Quote Share this post Link to post Share on other sites
Vlad G 345 Posted June 23, 2015 Everyone's guns are too clean and blemish free. I don't understand. Quote Share this post Link to post Share on other sites
Eric. 9 Posted June 23, 2015 Everyone's guns are too clean and blemish free. I don't understand. Thats cuz no one is as hardcore as 3Gun Vlad. Nobody. Eric Quote Share this post Link to post Share on other sites
ADK1113 1 Posted June 25, 2015 Everyone's guns are too clean and blemish free. I don't understand.It's mine's a new build. You want to see blemished? You should eyeball the m4 my unit issued me. Thing has more combat experience than I do. Sent from my XT1254 using Tapatalk Quote Share this post Link to post Share on other sites
Lalo 13 Posted June 25, 2015 You want to see blemished? You should eyeball the m4 my unit issued me. Thing has more combat experience than I do. Would love to see that, pics? pic thread... Quote Share this post Link to post Share on other sites
ADK1113 1 Posted June 25, 2015 Would love to see that, pics? pic thread... I'm loving that AK platform you got there bud! Sent from my XT1254 using Tapatalk Quote Share this post Link to post Share on other sites