Jump to content
mikka1

Advice on 22lr handgun for plinking & fun

Recommended Posts

Nothing new to contribute to this thread...  I have a Ruger SR22 which I bought a week and a half ago and hit the range hard.  No problems at all except with Remington Thunderbolt and Federal American Eagle 38 gn.  CCI Standard velocity 40 gn lead round nose has never let me down, and Remington Golden Bullets work fine.

 

Also, my Dad has a Beretta Neos which was less expensive and a better competition pistol.  You can even mount a scope on it or red dot if you like.  I will post pictures later comparing the two if you want!

 

Last but not least I have a North American Arms mini with 1 5/8" barrel that shoots .22lr and .22 mag.  Also a fun gun but not to the extent of the Neos or SR22.

Share this post


Link to post
Share on other sites

I will be picking up A Sig P226 22LR Classic tomorrow, Then the search starts for someone with A 40 S&W X-Change kit in stock.

Went into the LGS intending to buy A Sig Mosquito, But they had the 226 in stock and it was A no Brainer. Pick up then straight to the range to give it A run.

Share this post


Link to post
Share on other sites

Might want to order the caliber exchange from Sig. When you register your p226 online for warranty info, you get a 20% off coupon if you buy directly from them. It's back ordered on their site, and don't know the potential stock date, but it will save a large chunk of cash.

Share this post


Link to post
Share on other sites

Thanks for the heads up on the discount, I will see if I can put one on Backorder with sig. Picked the gun up the morn went to the range and ran 100 rds thru it.   Nice shooting gun right out of the box after A clean and lube.   Had A couple hiccups but no worries, I will run it some more and be good to go.

Share this post


Link to post
Share on other sites

I'll be picking up the Sig 1911 22 on wednesday (f#(¿↓ing OGAM) in the olive paint job with the walnut grips. Looks like its going to be a great 22. Has the same feel as a "real" 1911. The Gun Rack in Vineland is awesome, they let me test fire a couple diffrent ones and I settled on the Sig. Put a tight group at about 35 feet.

Share this post


Link to post
Share on other sites

I'll be picking up the Sig 1911 22 on wednesday (f#(¿↓ing OGAM) in the olive paint job with the walnut grips. Looks like its going to be a great 22. Has the same feel as a "real" 1911. The Gun Rack in Vineland is awesome, they let me test fire a couple diffrent ones and I settled on the Sig. Put a tight group at about 35 feet.

 

Wow they actually let you test fire before you buy?

Share this post


Link to post
Share on other sites

Thanks everyone,

 

Seems my shortlist so far looks like:

 

Ruger SR22 (main candidate)

S&W MP22

Walther PPK/S in 22

Sig P226 Classic 22

 

 

My favorite 22 is still my Ruger MKIII

Especially now that a couple of simple mods make it quite a bit more user friendly (hammer bushing and take down pin)

Share this post


Link to post
Share on other sites

I have a S&W 617 (revolver) and a Browning Buckmark pistol. I prefer the former overwhelmingly over the latter. There are more things you can do with a revolver, and they're infinitely easier to clean compared with any of the decent production-type target pistols.

Share this post


Link to post
Share on other sites

Shot both the Sig Mosquito and the Ruger SR22. Had no problems with either and both shoot equally well (no FTF/FTE).

 

The Mosquito:

Pro - looks and feels like a real gun

Con - shoots the expensive stuff, and the trigger REALLY sucks.

 

The SR22:

Pro: better trigger, and also shoots the cheaper stuff

Con: has a "toy" feel

 

I would lean toward the Ruger SR22 because of the trigger and ammo.

Share this post


Link to post
Share on other sites

Ruger SR22 going up for sale and/or trade as soon as I get my permits.  Interested in either a NAA Sidewinder with both cylinders or a Ruger 22/45 Lite.

Share this post


Link to post
Share on other sites

Approximately 75% of the rounds I shoot on my range trips are .22lr. I always start the day with my S&W 617, a 10-shot revolver. I could shoot it all day. To me that's a real f-ing gun. I then put about 100 rounds through my browning buckmark, and am amazed (suddenly) at how well I shoot. Not really -- I'm not a great shot. But I discovered that if you can shoot a revolver you'll be 2x as good with a semi-auto in the same caliber. 

 

In my brief experience I've found sharing calibers across platforms (revolver, pistol, rifle, etc.) is quite satisfying. It gives you a full appreciation of the caliber, and of your own capabilities. 

Share this post


Link to post
Share on other sites

Ruger SR22 going up for sale and/or trade as soon as I get my permits.  Interested in either a NAA Sidewinder with both cylinders or a Ruger 22/45 Lite.

hit me up if you're serious about parting with it, and for how much. I'm considering adding a 2nd one, because I like it that much and would be mad as hell if it went down and I couldn't plink 22's for a while.

Share this post


Link to post
Share on other sites

Might want to order the caliber exchange from Sig. When you register your p226 online for warranty info, you get a 20% off coupon if you buy directly from them. It's back ordered on their site, and don't know the potential stock date, but it will save a large chunk of cash.

 

Wow, this sounds like a very good deal. I'll have to get my hands on a P226 again to see how it feels. I shot one last year but made the mistake of shooting a CZ 75 SP01 at the same time. After holding, and eventually purchasing a CZ 75B, many othe guns feel blocky or chunky.

 

I'm looking for a 22 as well and thought I had it narrowed down to the Ruger Mark II 22/45 Target. Maybe I'll just have to get both the Ruger and the Sig P226 Classic and then add the 9mm conversion kit to the Sig!

Share this post


Link to post
Share on other sites

My aesthetic preference so far goes towards group #2. I'd really like to have a 22lr handgun that would look ... mm.. like a handgun :-) 

How do you feel about the M&P 22?  I actually like shooting mine more than it's 9mm big brother. : )

 

I also have the 22 kit for my Beretta, but I do like the feel of the M&P.  

Share this post


Link to post
Share on other sites

Wow, this sounds like a very good deal. I'll have to get my hands on a P226 again to see how it feels. I shot one last year but made the mistake of shooting a CZ 75 SP01 at the same time. After holding, and eventually purchasing a CZ 75B, many othe guns feel blocky or chunky.

I'm looking for a 22 as well and thought I had it narrowed down to the Ruger Mark II 22/45 Target. Maybe I'll just have to get both the Ruger and the Sig P226 Classic and then add the 9mm conversion kit to the Sig!

If you like your CZ, why not pick up the Kadet conversion kit for it.

Share this post


Link to post
Share on other sites

From the time I started this thread in January I actually acquired 2 handguns in 22lr - Ruger SR22 and Sig Sauer P226 Classic. 

After putting ~200-300 rds through each of them I think I can share my personal opinion.

 

1) Ruger SR22

I just LOVE it. I never thought I would ever love any handgun that small, but surprisingly that's the case. It is very accurate, eats pretty much any ammo I load into it (including cheap 36gr HPs sold in boxes of 333 or 525 rounds) and has an extremely nice feel in my hand. 

On a negative side I still can't form a proper grip so that the hammer in a cocked position sometimes burns my hand, especially after shooting for quite a long time.

I can seriously say that if you want to start with something truly inexpensive in 22 (and still looking like "real" handgun), SR22 might well be the perfect choice. 

 

2) SIG P226 Classic

I consciously bought it together with 9mm X-Change kit right away making a mental decision that 9mm will be my MAIN caliber for this gun with 22 being an inexpensive substitute for practice. If you want to eventually have P226 in 9mm or .40, this is definitely the way to go, because buying P226 in 22 AND X-Change kit might be even cheaper than buying P226 in a "big bore" caliber from the very beginning alone, so you essentially get 2 guns for the price of 1 (and with 1 permit which is also a serious consideration here in NJ).

Unfortunately I can't yet say too much good about it in 22lr. I admit I haven't tried it too much with 22 barrel and slide mostly using 9mm kit with it, but even with those 150-200 rounds I was not too impressed. It is very (no, _VERY_) picky with ammo (maybe because of the weight of the slide or because it is brand new and needs some time to break in), but the fact is I had MULTIPLE FTEs and FTLs all the way. It is better with CCI Minimags, but still with some hickups. 

I still don't want to say that it is a bad gun, non at all, especially given that SIG states in the manual that "rounds with lighter loads and lower velocities might have issues cycling through semi-auto handguns" (or something like this), but just for pure plinking with 22 I'd go with SR22 without any doubt...

 

Hope it helps

Share this post


Link to post
Share on other sites

Mark lll, Browning Buckmark, revolvers are cool, and Ruger SR22 is a blast

A beech to take down and clean. Unless you're a real competitor not worth it. Try a revolver. S&W 617, which I shoot better than my buckmark.

Share this post


Link to post
Share on other sites

Wow, this sounds like a very good deal. I'll have to get my hands on a P226 again to see how it feels. I shot one last year but made the mistake of shooting a CZ 75 SP01 at the same time. After holding, and eventually purchasing a CZ 75B, many othe guns feel blocky or chunky.

 

I'm looking for a 22 as well and thought I had it narrowed down to the Ruger Mark II 22/45 Target. Maybe I'll just have to get both the Ruger and the Sig P226 Classic and then add the 9mm conversion kit to the Sig!

The 226 classic is fun to shoot. Shot about 200 rounds on Saturday, and had a few issues, but were ammo related. With 22 still scarce, I have been shooting golden bullets which are junk IMO.

Share this post


Link to post
Share on other sites

I don't know why people consider permits to be an issue when considering one or multiple guns.

You find an FFL willing to work with you, you start stacking guns with them as you go through the permitting process, and you "check out" a gun from your FFL every month. I did that for nearly 6 months straight.

 

IMHO an SR22 should be in everyone's safe. they're awesome little guns.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.



  • olight.jpg

    Use Promo Code "NJGF10" for 10% Off Regular Items

  • Supporting Vendors

  • Latest Topics

  • Similar Content

    • By Ballard
      The same kit fits both the 9 and 40 frames so I can take it whichever you got it for.
    • By Isidro416
      Sold my GSG-5 22LR with fake suppressor. $300. These are a blast to shoot. Have two mags that have been converted to 10 rounds. Don't shoot it anymore and want to clear up some space on the safe. I live in Bergen county and will meet you in a dealer who you choose. You pay transfer so choose a cheap transfer dealer.




    • By Apollo7
      Anyone has Tkka T1x? How do you like it? Strongly considering it for my next purchase.
    • By Matroskin
      Need help deciding here:
      I'm torn between Ruger mark IV and SW22. Want to buy a universal gun for Bullseye and Steel Challenge, so it has to be bull barrel or similar.
      I like stainless steel Ruger and million aftermarket parts available but I don't like grip angle (22/45 fits better but it's plastic) and the fact that barrel is the firearm. So every time I would think of a new barrel it will have to be a new set permits....
      On the contrary SW22 has less aftermarket support and somewhat strange grip  - the angle is fine though. Plus its cheaper.
      Your opinions? pls?
      thanks in advance.
      P.S. Buck Mark is out - don't even bring it up :). I own Buck Mark, i like the way it shoots but the takedown process can be painful. last time I wanted to clean it i stripped the hex screw and had to go to a gunsmith . Also, little aftermarket options and harder to find parts. 
    • By Maksim
      Finally had the chance to spend a good amount of time with the gun.  At this price point, there is no reason not to get one!
       
  • Posts

    • I use an Alien Gear cloak tuck (IWB) with my Shield.  Neoprene back - in the summer it does feel warm but doesn't rub or chafe.   https://aliengearholsters.com/ruger-lcp-iwb-holster.html Could also go with the shapeshift as it has multiple options - OWB/IWB, Appendix... https://aliengearholsters.com/ruger-lcp-shapeshift-modular-holster-system.html
    • The  12-1 compression ratio L88 is long gone. This is GM's updated version. it might be  pump gas 10-1 engine The L88 was a aluminum head  cast iron block engine with a nasty solid lifter cam. the  ZL1 was a all aluminum  12 or 13-1 compression ratio engine with the best forged internal parts at the time and had a even nastier solid lifter cam 
    • I like my regular carry holster.  OWB leather with belt slots.  I've been carrying for over a year and it was comfortable and I hardly even noticed it.  I carry (usually) a Ruger LCP .380 - light, convenient, tiny. But...today I ended up taking it off an leaving it home after a few hours. I cut down a big maple tree a few days ago and I spent 3/4 of today loading and unloading firewood into the back of my truck and a trailer.  It was a warm day, I was dirty, tired, sweaty, and my holster was rubbing against my side.  The leather and exposed metal snap was no longer comfortable. I'm thinking about adding a layer of something to that part of the holster to soften the contact.  Anything insulating will make it worse.  I don't want a sweaty, hotter holster against my skin.  I'm imagining something thin, breathable, that won't absorb sweat, and softer than leather, metal snaps, and rivets.   But I have no idea what would work. I'm hoping somebody else has already figured this out and I can just do what they did. Any suggestions appreciated.
    • Check the primers on the ammo you didn't shoot yet. Are they fully seated? If the primer is not just below flush with the back of the case, the first hit can seat it better then the second hit ignites it. 
    • And, charging your car at home? We've got you covered! California braces for new electric plan: Make more, pay more | Fox Business
×
×
  • Create New...