Jump to content
Ray Ray

Official Beretta picture thread

Recommended Posts

9 minutes ago, Krdshrk said:

On which gun?

The hammer spring upgrade can be done on 92/96/M9 models. Below is a tutorial video by MrGunsnGear showing how to swap the hammer spring. In the video is a side by side comparison of the original hammer spring and the D spring version and the results using a trigger pull gauge.

https://youtu.be/ItIVFNj15mE

Regards,

TokenEntry

Share this post


Link to post
Share on other sites
5 minutes ago, TokenEntry said:

The hammer spring upgrade can be done on 92/96/M9 models. Below is a tutorial video by MrGunsnGear showing how to swap the hammer spring. In the video is a side by side comparison of the original hammer spring and the D spring version and the results using a trigger pull gauge.

https://youtu.be/ItIVFNj15mE

Regards,

TokenEntry

Not sure about the M9A3.  I've heard that the trigger is already smoother and lighter.  Maybe someone else can compare who has more exp.

Share this post


Link to post
Share on other sites
15 minutes ago, Krdshrk said:

Not sure about the M9A3.  I've heard that the trigger is already smoother and lighter.  Maybe someone else can compare who has more exp.

It seems that the D spring is already factory installed by Beretta. A 1911 forum member confirmed this in a post at the bottom of the page 1. You're GTG already!

Regards,

TokenEntry

Share this post


Link to post
Share on other sites
7 hours ago, Krdshrk said:

Why?  I have M9A3 now.  I was thinking of adding a 92 Compact Inox or Vertec Inox.... I'm really digging the vertec grip

I hate the grip angle.  The corner is too sharp.  Add a 92FS and I'll sleep better. 

Share this post


Link to post
Share on other sites
On 1/7/2018 at 1:55 AM, TokenEntry said:

Highly recommend replacing the hammer spring with a D version. Improves the trigger pull by making it lighter and smoother.

Regards,

TokenEntry

Just picked up a gently used 92A1.  I have the D spring and rubber stock grips coming soon. What do you do with the flexi composite captured guide rod?  Beretta has a steel captured replacement that is never in stock, and I see that Wilson Combat has a fluted one that can “retro” fit into the 92a1 with a flat 14lb spring. Thoughts?

Share this post


Link to post
Share on other sites
4 minutes ago, SW9racer said:

Just picked up a gently used 92A1.  I have the D spring and rubber stock grips coming soon. What do you do with the flexi composite captured guide rod?  Beretta has a steel captured replacement that is never in stock, and I see that Wilson Combat has a fluted one that can “retro” fit into the 92a1 with a flat 14lb spring. Thoughts?

My pistol was purchased in the late 1990's and was made in Italy. It was labeled as a stainless steel version which is now known to be the INOX. No comment on the guide rod as mine already came with the non-capture steel version when I bought it.

Link - Beretta Technical Data

Regards,

TokenEntry

.

Share this post


Link to post
Share on other sites
On 7/18/2018 at 7:29 AM, SW9racer said:

Just picked up a gently used 92A1.  I have the D spring and rubber stock grips coming soon. What do you do with the flexi composite captured guide rod?  Beretta has a steel captured replacement that is never in stock, and I see that Wilson Combat has a fluted one that can “retro” fit into the 92a1 with a flat 14lb spring. Thoughts?

You can change the guide rod - I've used both the solid stainless and fluted - but I haven't had any issues with the plastic one either.

I changed mine more for cosmetic reasons.  I wanted the stainless version for my Inox.  I have the fluted version on my Wilson Combat.  My 92a3 has the stock guide rod and I have a 92S with the plastic one too. 

IMG_1020.JPG

  • Like 1

Share this post


Link to post
Share on other sites

@Ray Ray I missed a compact and now WC does do them any longer.  They are doing a full size frame compact slide with a 20 round mag. 

https://shopwilsoncombat.com/Order-the-92G-Centurion-Tactical/products/975/

 

id really like a compact but I may get this instead.  

  • Like 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.

  • NJGF members in chat (3)



  • Supporting Vendors

  • Latest Topics

  • Similar Content

    • By JasonSeidman
      My first pistol was a used 92fs inox in very good shape.  I love it.  I don't know how old it was when I got it, but i've had it well over 10 years.  On my last two range outings, I've experienced the oddest FTF pattern i've ever seen.  It FTF on the 4th round every time.  I thought maybe its the ammo, and tried three different brands, with 115gr and 124gr.  I used two different magazines.  I even stripped and cleaned between outings.  I fire three rounds and FTF on the fourth.  Clear the jam, 3 and FTF on the fourth.  Ive even tried using the rounds that FTF and put them in the first three with no issues, until the fourth round.  
      Something mechanical must be going wrong.  Ive looked around and seen a few possible issues to try and solve this short of going to a gunsmith.  
      Anyone have any ideas?
       
      Thanks,
      Jason
    • By Maksim
      I get emails from Davidson's and other distributors.  This week they are having a special on HK P30L in 40 S&W for $469.  Assume + shipping + dealer markup.

      Also seems like a deal? on M9A3.

      Also, the Walther Creed is $249.  This was actually a really nice gun when I got to play with it at Shot Show.  Surely better than the lower end Smiths, etc.

       
    • By Maksim
      For Cyber Monday, Beretta is offering 30% off, site wide, on orders of $250 or more.
      One of the things they sell is magazines, such as for the 92FS and others.
      Right now you can triple dip on the discounts.
      Both the 15rnd and 10 rnd are on sale for $26, down from $36 and $29.  If you buy two or more, they go down to $24.
      If you buy 11, taking your total to over $250, you can use the Black Friday/Cyber Monday discount of 30% off, coupon code BF18.  This brings it down to $184.80 for 11 magazines, free shipping!

      Link to Sale
    • By Kuryakin
      Beretta PX4 Storm .45ACP Special Duty Tactical.

      Excellent condition. Approx. 450 rounds through the gun.

      Comes with everything you see in the pictures:

      3 magazines, 1 flush 9rd, and to 10rd extended,
      Original Pelican case, cleaning kit, manuals, oils, etc;
      Streamlight TLR-1,
      Safariland Level 2 holster (drop leg, mid-ride, and molle mounting options).

      $800 O.B.O.







    • By MiniArms
      The scale: 1: 5
      The caliber: 2mm
      Weight: 27 g
      How do you like it? The gun is made of nickel-based metal, which has the same hardness as weapon steel, but it is corrosion-resistant. It doesn’t require additional care, which distinguishes it from weapon steel. The guaranteed resource of the gun is 1000 shots. 
      10 special cartridges with hardened steel bullets. Such bullets do not deform when they hit any surface, they punch through even metal sheets, for example, cola cans. 
      Look at this gun in action:
      https://www.youtube.com/watch?v=qDknabx_Jcg&feature=youtu.be

  • Posts

    • In this case, it's because the governor of N.M. is a Democrat, and everyone knows, if you support upholding the constitution, you're "Right Wing". Actually, this militia is made up of veterans and ex-Leo's, so it's a slap in the face to them by the governor. They are upholding the oath they swore to, it's the governor that's not. United Constitutional Patriots:  Border patrol vigilantes For two months, an armed group of ex servicemen and police officers have been patrolling the New Mexico-Chihuahua border for asylum seekers from central America.  The group describe themselves on Facebook as: 'Americans that believe in the constitution and the rights of every American that will stand up for there rights in unity and help keep America safe.'  https://www.dailymail.co.uk/news/article-6932583/More-300-asylum-seekers-surrender-armed-militia-New-Mexico-citizens.html    
    • @mjtrip001 , I'm in the same situation as far as being the first in my town. I guess my contact at the PD has been a bit more helpful than yours is being. We are pretty much going through the exact same process but I applied on the 20th of March. I also had a delay in one of my references who didn't receive his email and that is when my contact with my local PD initiated. When I talked to him today he said he finished my application through the FARS system last Friday which is when I got the email it was completed.   I would contact him and say you haven't received your completion email from the NJ FARS system and was wondering if there was anything else you can or needed to do to help the process.  One thing I have been doing the entire time is saying I know I'm the first one, I'm in no rush for my permits, that I really just wanted to help my local PD get familiar with process so it'll be streamlined in the future. I've joked numerous times that I don't mind being the guinea pig, and I'm glad I could help him learn the new system. 
    • So it's a 22 that you use and abuse and leave it dirty and loaded in a holster or backpack.
    • That's gonna be a nice rig Iggy.  Congrats.  Who will be spinning the barrel for you?
    • she is wrong re:citizens detaining./ it's called citizen arrest.        or I could be wrong  
×
×
  • Create New...

Important Information