-
Recently Browsing 0 members
No registered users viewing this page.
-
Supporting Vendors
-
-
Latest Topics
-
-
Similar Content
-
By rifleman
Model 1891 Argentine Mauser 7.65 x 53 with bayonet. Not an exact match but fits pretty good. This fine weapon is an engineering marvel well over 100 years old. Ramp sight to 900 yards for harassing fire to prevent free movement in the enemy's camp. Steel is in pretty good condition. All threads have been lubricated and work fine. Crack in upper handguard & the stock was secured with 2 screws. I have shot this many times and he is a beast. If your'e looking for a shooter, Boyd's has replacement stocks and you can take your spot on the line with fine German craftsmanship.
Barrel has all the right stamps and marks according to several articles.
I had this gun for 35 years and time for a new home. I used to display it in my office with the bayonet but it looked way too scary.
22 boxes (440 rounds) of new ammo included. They go for $40 per box now!
Rifle, bayonet (with metal sheath) & ammo $450 or trade for 12g target ammo/silver. I can bring it to Central Jersey Rifle Pistol Club for inspection.
First reply I'll take it gets the prize
-
By RetNJ47
Great start for people looking to get into reloading. $500. (FIRM)
RCBS Rock Chucker Supreme IV Single Stage Press on Inline Fab stand with extras. Located in the Lakewood area(Weshoot or Shoreshot). Would prefer to meet at either of those spots but willing to meet halfway.
Rockchucker Supreme IV Single Stage Press
https://www.rcbs.com/presses/single-stage/rock-chucker-supreme-press/16-9356.html
Inline Fabrication Ultramount for RCBS Rockchucker, RC1,2,3. Supreme IV,Pro2000 & Turret presses.
https://inlinefabrication.com/collections/rcbs/products/ultramount-for-rcbs-rockchucker-rc1-rc2-supreme-pro2000
Inline Fab Automatic Case Ejector System
https://inlinefabrication.com/collections/rcbs/products/case-ejector-system-for-rcbs-rockchucker-single-stage
Inline Fab Universal double component tray system.
https://inlinefabrication.com/collections/press-accessories/products/universal-double-bullet-tray-system?variant=323708361
RCBS
Uniflow Powder Drop
https://www.rcbs.com/priming-and-powder-charging/mechanical/mechanical/uniflow-powder-measure-iii/16-9016.html
M500 Mechanical Scale
https://www.rcbs.com/priming-and-powder-charging/weighing-scales/m500-mechanical-scale/16-98915.html
Powder Trickler
https://www.rcbs.com/priming-and-powder-charging/scale-and-powder-accessories/powder-trickler-2/16-9089.html
Universal Case Loading Block
https://www.rcbs.com/case-processing/accessories/universal-case-loading-block/16-9452.html
Hand Priming Tool for Small and Large Primers
https://www.rcbs.com/priming-and-powder-charging/hand-held/hand-priming-tool/16-90200.html
Additional press add ons:
(NIB) Advanced Powder Stand
https://www.rcbs.com/priming-and-powder-charging/scale-and-powder-accessories/advanced-powder-measure-stand/16-9092.html
(NIB) RCBS Auto Prime System
https://www.rcbs.com/presses/press-accessories/rock-chucker-supreme-auto-prime/16-9358.html
Hornady impact bullet puller.
Small items include (2) funnels with different attachments, calipers, primer pocket brush, case lube, case wax, case lube pad, lube pad roller, and die wrench.
All the heavy lifting to start reloading is done. This press/die set has only been used to deprime a few cartridges(I have no patience). Aside from dust it’s brand new.
****DISCLAIMER**** Not my fault if you do something stupid and get hurt. Do your research.
-
By RetNJ47
Selling my Troy A4 “Other” Firearm 5.56(.223) with Blast Shield (faux suppressor) and BA Hanson profile 11.3” precision barrel with Silencer Co ASR muzzle brake.
Had gunsmith remove pin and welded muzzle brake on stock 10.5” inch barrel. Upgraded to BA 11.3” performance barrel bringing OAL to 26.8 inches without pin and welded muzzle device. ASR threaded Silco brake added with 6” Blast Shield. Trigger/Feed Ramp polish job for smoother take up and crisp reset(for a Mil-Spec trigger). Only 40 rounds have been fired for testing and proper initial barrel break in using Modern Spartan Systems accuracy oil between shot cycles.
Full list of modifications:
-Ballistic Advantage Hanson Profile 5.56 chambered 11.3 inch Performance Series Barrel
-SilencerCo Muzzle Brake
-SDTA 6” Blast Shield
-SBA3 Brace (Black or possibly FDE available)
-Magpul Gen 2 BUIS and Vertical Foregrip
-CMMG Stainless Gas Tube
$1550
Located in Toms River with closest FFL being Weshoot/Shoreshot. Buyer responsible for transfer fee at FFL.
Still have stock barrel also if interested.
**Eotech Not Included** if interested it’s an EOtech EXPS2-0 and I have a G43 magnifier w/STS mount and Surefire light with pressure pad to go along with it.
-
By lostcyborg
Both of these handguns have literally zero rounds through them. I wish i was lying, these were both random purchases in the past not thinking of use or need. Both come in their respected boxes with everything that came with them. The Canik does come with a tlr-3 just because it fits well and i have a tlr-1 hl on my glock and my walther pdp pro.
First pistol is a Armscor M1911 A2 45 ACP. Comes with one magazine.(10rd) $380.00
Second is a Canik TP9SF Elite 9mm Comes with Two Magazines(10rd) $370.00
Cash/Paypal Sorry no trades. All transfers made via NJ FFL. All local laws apply. Buyer pays transfer fees at FFL. My FFL Is Louie GS In Secaucus(I live in bergen co)
Prices are final and non negotiable.
First Come first serve(I’ll take it) will update as needed.
-
By medic2264
WTS USED GEN 5 GLOCK OVERWATCH PRECISION TAC TRIGGER
$125 Overwatch precision tac trigger gen5
$20 Hyve technologies extended magazine release gen 4/5
I'm in Monmouth County
The first "I'll take it" followed by a PM
PM me for questions.
-
-
Posts
-
Hey guys, looking to pick up a great condition Smith & Wesson model 41 22lr. Let me know what you have. Located in central Nj Thanks Chris
-
By Grima Squeakersen · Posted
Have you done any research into the cost and licensing requirements to run a repeater? We own some mountainous acreage in a very rural part of Virginia RIdge and Valley country that serves as vacation place and potential SHTF retreat. We get mediocre cell phone coverage (US Cellular only) and nothing else. I have thought of putting an antenna tower up the hill a ways (we own nearly to the top of the ridge. I wouldn't do it just for Ham or GMRS radio, but if I could get expanded cell coverage, and/or satellite internet (Dish or Starlink) as well, from one tower, I might go for it. ==== sorry, didn't intend to hijack the thread ====
-
-